Latest carrier bag Tenders | Government carrier bag Tenders

CTN :45716965

13 Jul, 2026 3.27 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one

CTN :45672362

10 Jul, 2026 16.57 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For erection and fabrication work a c c - mill mein lage scraper hetu discharge chute ke jo bhag kamzor evam kat gaye hain. unhe kaatkar hatana tatha nai 12 mm ki plate se taiyar kar punah sthapit karna. sath hi scraper ko baandhne hetu profile ke anusar hole wali plate lagakar/welding karke fix karna evam karya poorn hone ke pashchat trial dena. , cane carrier ke gale/ghise runner base ko kaat kar hatana. 100 mm ke channel se box banakar runner base ko lagana evam fit karna va purane channel ko nikal kar seedha karke palat kar lagana. , cane unloader ke purane ghise/kate 40/50 mm size ke sq. bar ko kaat kar hatana tatha yathasthan poorv ki bhanti naye sq. bar ko lagana evam santoshjanak trial dena. , cane carrier/rake carrier/bagasse elevator/r.b.c. ke ghise/kate runner ko kaatkar hatana. uske sthan par purane ko palat kar athva naye runner ko poorvanusar lagana. , cane carrier/rake carrier/r.b.c. ityadi chains ke side ki kati/ghisi/kamzor plate ko kaatkar hatana. uske sthan par purani athva nai plate ko lagana. , fibrizer hood ki side ki ghisi/kamzor plates ko kaatkar nikalna tatha yathasthan nai plate ko lagakar andar va bahar se welding kar santoshjanak trial dena. , bagasse baling machine ki sampoorn overhauling. testing evam trial dena. , s.r.c./i.r.c. ki purani racks ki vanchhit marammat karna. , bagasse elevator/r.b.c. ki chains ki nai racks sample anusar taiyar karna. , t.r.p.f. ke gale/kamzor bottom/top cover ko badalne ke liye naye cover poorvanusar banakar lagana evam santoshjanak trial dena. , s.r.c./i.r.c. ke gale/kamzor tail end boots ko kaatkar hatana tatha sample anusar 8.0/10.0 mm moti purani/nai plate se taiyar kar lagana evam leak.proof welding kar santoshjanak trial dena. , cane unloaders ke panjon ke vibhinn parts ko dismantle karna. dismantle kiye gaye grabs ke sabhi parts ki vanchhit marammat karna. fingers par nirdeshanusar hardfacing kar panjon ka punah assembly karna. , mills ke compound imbibition hetu lagi juice tray mein se gali/kamzor juice tray ko kaatkar hatana. nai plate se sample anusar taiyar kar yathasthan lagana evam samast connection karna. , cane carrier/s.r.c./i.r.c. tatha bagasse elevator chains ko upar uthne se rokne ke liye lagi hui guides mein se ghisi/kamzor guides ko kaatkar hatana. nirdeshanusar nai guide taiyar kar yathasthan lagakar santoshjanak trial dena. , cane unloaders ke bridge/trolley drive ke ghise/kate wheels ko nirdeshanusar welding karna. , t.r.p.f. ke gale/kamzor donali chutes ko kaatkar hatana tatha purane anusar naye donali chute fabricate kar yathasthan erection karna. , cane carrier ke liye lagi idler wheel par nirdeshanusar m.s. ke ring fabricate kar lagana. , mill head stock evam t.r.p.f. head stock ke beech nirdeshanusar 25.0 mm plate se support banakar lagana. , fibrizer ke purane hammer shanks ko nirdeshanusar welding evam hardfacing kar marammat karna evam balance karna. , cane chopper/leveller ke gale hue/kamzor hoods ko kaatkar hatana tatha nai plate se naya folding type banakar lagana. , fibrizer ke pocketed type anvil plate ki pockets ki tooti plates ko nai plates se badalna. mudi hui plates ko seedha karna tatha welding kar taiyar karke nirdeshanusar hardfacing karna. , cane leveller/chopper ke rotor assembly ki ghisi hubbo ke working side evam top sides ko welding kar samatal karna evam nirdeshanusar hardfacing karna. , cane unloaders par lage reduction gear evam motors ke kamzor beds ko kaatkar naye modify karke naye bed banakar lagana tatha gear evam motor ka alignment kar trial dena. , cane carrier ki structure ke gale/kamzor columns ko nirdeshanusar plate lagakar welding kar majbooti pradan karna. , mill rollers mein sample anusar juice ring fabricate kar fit karna. , t.r.p.f. evam mill ke beech mein lage pressure chutes ki vanchhit marammat karna. , mills ke gale/kamzor juice receiving tank ko kaatkar hatana. 8.0/10.0 mm moti plate se sample anusar tank fabricate kar yathasthan fit karna evam samast connection kar leak.proof trial dena. , mill ke ju

CTN :45470341

25 Jun, 2026 NA

Sitapur - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - restoring enlarged holes in the links of the primary cane carrier, secondary cane carrier, bagasse elevator, inter-carrier, main bagasse carrier, and return bagasse carrier to the required bush size by hot forging, in accordance with the instructions of the foreman, assistant engineer, and chief engineer. budget head – manpower (off-season).

Central Government/Public Sector

CTN :45645919

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap stainless steel consisting of lavatory pan,wash besin,protector,footstep,cruicible commodes ,steel wire rope,steel pipe,steel strap,steel water tank,steel oil tank, magazine bag,steel tray,trolley steel, steel bucket, soap dishes and container,pull chain,alarm chain,curtain rod,steel table, parts of bio tank and other similar items of steels of sorts and sizes with or without parts and fittings with negligible nf attachment. note:- 1-loading by purchaser. 2- deliverey not allowed against part payment. 3-cutting and hammering allowed for removal of ferrous,fibre,plastic, wood, rubber etc only for four days and at the time of delivery. location:-lying at near line no-11, roadside.

Central Government/Public Sector

CTN :45645920

06 Jul, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap stainless steel consisting of lavatory pan,wash besin,protector,footstep,cruicible commodes,steel wire rope,steel water tank, steel oil tank, steel strap,steel pipe,magazine bag,tray.trolley ,steel bucket,soap dishes container,pull chain,alarm chain,curtain rod, steel table,parts of bio tank,and other similar items of steels of sorts and sizes with or without parts and fittings with negligible nf attachment. note-1-loading by purchaser. 2- deliverey not allowed against part payment. 3-cutting and hammering allowed for removal of ferrous,fibre,plastic, wood, rubber etc only for six days and at the time of delivery. location: lying at across traversor near boundary wall

corporations/Associations/Others

CTN :45600173

30 Jun, 2026 21.30 Lacs

Mumbai - Maharashtra

Tender For bus body components - " bus body components", ss hinges (type approved is 14225 of 1995), 3 point safety belt for driver seat ( type approved ), ms butt hinges 102 x 76 x 3.5mm thk, two way window guard rail socket (close end), two way window guard for rail socket (open end), ms bonnet handle 6.5" (165mm long ), budjet lock special, ring bracket, budjet lock key, diesel tank cover, ms built hinges is14225 of 1995, sunviser (roller blind) roller type size 1000mm wide x 480mm height, ppcp assist handle, new type diesel tank cover, magazine pouch with metal plate with mounting hole size 280 x 230 mm min, inspection leads handle for msrtc buses, velcro belt size : 20mm wide x 100mm long in mtrs, sunviser (roller blind) roller type-2010mm.widex1000mm height, nylon wearing strip for truss panel size 25x2.2x3000mm long, emergency escape hatch with air vent size - 970 mmx550mm fr grade, two point safety belt for folding seat (type approved), fr grade pvc antiskid vinyl matting size - 2 mtrx2mm thick colour navy blue, curtain mounting socket, bag hook, pvc casing capping size 40mmx2mtrs long, kraft paper size 800mmx10mtr. color brown gsm 80 to 100, driver door hinges for leyland bs6 vk 2010.9t6rb (type approved is-14225 of 1995), emergency door hinges for leyland bs6 vk2010.9t6rb (type approved is-14225 of 1995)

CTN :45587965

03 Jul, 2026 NA

Angul - Odisha

Tender For supply of office stationary and miscellaneous items alpin 100gm , alpin magnetic box , arch file card board , withlever(14"x10") , arch file plastic 2-d , ring binger(25mm) , binder clip19mm , binder clip25mm , binder clip41 mm , binder clip51mm , white board marker (per piece) , board pin(plastic top) (per packet) , brown tape(for packing)2" and 50 mtr , budking , calculator 12 digit with warranty (per each) , register , ruled-(legal size) (per no) (good quality paper) , cd 100 nos pack with pouch , cd album a4size 100 cd , adhesive tape1"and 50mtr , adhesive tape 2"and 50mtr , colour card post card size (per 100 card) , cleaning fluid spray 500ml (glass & household cleaner) , copier paper a4size70 gsm(500sheets) , copier paper legal size70 gsm(500sheets) , copier paper a4 75 gsm-500sheets , copier paper a3 100 gsm-500sheets , white paper (per rim) , correction fluid with diluter (per no) , correction pen (per no) , rubber eraser , 33mmx17mmx10mm (per sech) , paper flag (self adhesive)-colored (four colors) size 1"x3"(50x4colors) (per packet) , plasticflag (self adhesive) - , colored (fourcolors) size1"x3" (50x4 colors) (per packet) , drawing sheet (per sheet) , plastic folder (fullscape)withsinglebott om double pocket (per each) , plastic folder (fullscape) clear bag with single bottom (per each) , plastic folder two packet (full scape) with single , bottom(per each) , folder executive (full scape) (per each) , executive folder leather , finish (per each) , l folder a4 (each) , glossy paper for photo printinga4(20sheet180gsm) , glossy paper for photo printinga4(50sheet180 gsm) , gum tube 50ml. (per tube) , gum stick 15gm (per stick) , highlighter (per each) , james clip plastic coated(100 , clips) (per packet) , stock register (per no) , mounting tape(double side , foam tape)24mm , file packing cloth (nylon) (red) per1 , mtr file & magazine rack- , plastic(setof2)size: 12" (h)x11"(l) x3.5"(w) , ohp sheet a4(100 sheet pack) , paper cuttermrp10/- , paper tray plastic(full scope) , paper weight glass (square shape) , paper weight fiber (square shape) , permanent marker(ohp) , pen(use & throw) , pen mrp-5/- , pen mrp 10/- , pen mrp 20/- , pen mrp 80/- , pencil (per packet) , pencil battery aaa (per each) , pencil battery aa (per each) , peon book (per each) , punching machine double (per machine) , punching machine double , heavy duty (per machine) , punching machine single (per each) (black) , room air freshener(spray) , 125gm/234ml(per each) , rubber ring elastic100gm pkt2" , ledger (accounts) per no , scale steel12" thickness not less than 1mm(per each) , scissors 12" plastic handle(per each) , scissors 8" plastic handle(per each) , sketch pen(pkt.of10) (per each) , cd marker(pkt.of10) (per each) , stamp pad 8cmx12cm(per each) , stamp pad ink 100ml(per each) , stapler pinmedium24/6(per each packet) , stapler pin small no-101m(per each packet) , stapler pin big 26/10(per each packet) , stapler hd 23s24 (per each) , stapler medium hd45 (each packet) , stapler small 10m (each packet) , steno khata100pages (each) , sticky pad(3"x3") (each no) , sticky pad(4"x4") (each no) , cash book(new)per no , pages (legal size) , tag (50nos.)5.5 inch , thread (nylon) (per bundle) , towel for chair (88x175cm.) (per each) , towel for hand (16"x24") (per each) , visiting card holder , -120 , cards , with , cover(11cmx19cm) (per each) , acid for sanitary use(1lt. bottle) , broom(alandhu jhadu). , broom big size(phul jhadu) , broom big size(khadikajhadu) , bucket15lt. , calling bell cord less with remote , calling bell cord less without remote , led bulb 9watt , led bulb 30 watt , tissue paper(sheetsize-18cmx20cm)-2ply , tissue paper(sheetsize-27cmx30cm)-1ply , door mat plastic grass type (rate per sq.ft) , door mat stick (rate per no.) , four pole mcb witch 100 amp , double pole mcb switch 16 amp , double pole mcb switch 32 amp , double pole mcb switch 63 amp , double pole mcb switch 100 amp , single pole mcb switch 100/125 amp. , sin

CTN :45588621

21 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of magazine bag of vb train set executive seat of m/s.pinnacle industries limited to part number r001150030092, conforming to spec:icf/md/spec-366,rev-3 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45420427

17 Jun, 2026 NA

Panipat - Haryana

Tender For supply of bearing unit ucp204 , housing and bearing t204 , housing and bearing ucfl205 , bearing ucf-206 , bearing uc-205 , bearing ucpa-205 , bearing ucp-207 , bearing with housing ucp212d1 , bearing 6000-llb-c3 , bearing 6005-2rs1 , bearing 6007-du , bearing 6013- zz , bearing 6200-2z , bearing 6201-2z , fan bearing 6202-2z , bearing 6205-2rs1 , bearing 6206 , gear for bag placer big , bearing 7204 , locktite 574 , grid bar outer chain grid , stop brush outer chain grid , bellow sucker singling out device , filter sucker opening unit , vacuum pipe 1 inch , pressure gauge -0 to 15 psi , coil indication and emc suppression module , 95.05. relay socket 250v 10a 2pole relay , rubber stop - stripper plate , door handle ss , magazine cover big , magazine cover small , cable cu 4cx2.5sq mm pvc ins shtd arm , spreader sprocket , positioning roller shaft , elevator drive spocket lock l-lock , spreader middle gear shaft , elevator drive sprocket guide teflon , stripper plate motor key , movable cable tray system- row pusher , row pusher up-down roller lock , timing belt for palletiser , timing sprocket , gear for bag placer-small , 3 way legris valve , driving belt row pusher c060019 , taper lock 25 mm , drive pulley of stitching machine , stitching machine motor pulley , orientation clamp angle 1 , orientation clamp angle 2 , orientation clamp base , grouping belt stud , stitching machine v belt cover , purging regulator genatics r13614 , magazine door hinge , spreader middle gear , spreader arm gear , stripper plate belt tightner bracket , swing arm fixing bracket , stitching machine base pin , conforming base plate , conforming back angle plate , elevator teflon guide , brg ball single row skf 6203 2rs 2z , outer chain with pin link , takeaway turning sprocket , stripper plate shaft with keys , row pusher shaft , outerchain shaft , big sprocket bearing type , big sprocket fix type , row pusher pulley shaft end , pulley row pusher motor end , clamping piece -toggle joint unit gusset gripper clamp , clamping piece - bag spreader clamp , swivel head- gusset gripper , bearing wheel - row pusher teflon g020002 , roller chain stainless steel infeed chain , metal guide , safety switch , non return valve-6 153463 , lithium battery cr2330 3v panasonic big , key way roller dia -65 , key way roller dia-80 , flat roller dia-65 isas arm , bag placer clamp , guiding stripper plate g070043 , guiding stripper plate g070044 , spreader hollow shaft ss , isas belt adjuster tightner , infeed chain coupling , seal kit vacuum pump pneumatic , cutter sov - janatics ds255sr61-w-24v dc indirect solenoid actuated spool valves 5 by 2 , outer chain full lock - half inch rolon or diamond , sm filter , stripper motor cover , double keyway roller dia 85 , drive roller dia-85 , ball bearing 608rs , fan motor , pressure switch- pneumatic smc , roller - conveyor r020036 , roller - conveyor r020017 , air jack - pneumatic v520019 rexroth r424b07296

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

Carrier Bag Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government / Public Sector

Co-operative