Latest carrier bag Tenders | Government carrier bag Tenders

CTN :45716965

13 Jul, 2026 3.27 Lacs

Saharanpur - Uttar Pradesh

Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one

CTN :45672362

10 Jul, 2026 16.57 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For erection and fabrication work a c c - mill mein lage scraper hetu discharge chute ke jo bhag kamzor evam kat gaye hain. unhe kaatkar hatana tatha nai 12 mm ki plate se taiyar kar punah sthapit karna. sath hi scraper ko baandhne hetu profile ke anusar hole wali plate lagakar/welding karke fix karna evam karya poorn hone ke pashchat trial dena. , cane carrier ke gale/ghise runner base ko kaat kar hatana. 100 mm ke channel se box banakar runner base ko lagana evam fit karna va purane channel ko nikal kar seedha karke palat kar lagana. , cane unloader ke purane ghise/kate 40/50 mm size ke sq. bar ko kaat kar hatana tatha yathasthan poorv ki bhanti naye sq. bar ko lagana evam santoshjanak trial dena. , cane carrier/rake carrier/bagasse elevator/r.b.c. ke ghise/kate runner ko kaatkar hatana. uske sthan par purane ko palat kar athva naye runner ko poorvanusar lagana. , cane carrier/rake carrier/r.b.c. ityadi chains ke side ki kati/ghisi/kamzor plate ko kaatkar hatana. uske sthan par purani athva nai plate ko lagana. , fibrizer hood ki side ki ghisi/kamzor plates ko kaatkar nikalna tatha yathasthan nai plate ko lagakar andar va bahar se welding kar santoshjanak trial dena. , bagasse baling machine ki sampoorn overhauling. testing evam trial dena. , s.r.c./i.r.c. ki purani racks ki vanchhit marammat karna. , bagasse elevator/r.b.c. ki chains ki nai racks sample anusar taiyar karna. , t.r.p.f. ke gale/kamzor bottom/top cover ko badalne ke liye naye cover poorvanusar banakar lagana evam santoshjanak trial dena. , s.r.c./i.r.c. ke gale/kamzor tail end boots ko kaatkar hatana tatha sample anusar 8.0/10.0 mm moti purani/nai plate se taiyar kar lagana evam leak.proof welding kar santoshjanak trial dena. , cane unloaders ke panjon ke vibhinn parts ko dismantle karna. dismantle kiye gaye grabs ke sabhi parts ki vanchhit marammat karna. fingers par nirdeshanusar hardfacing kar panjon ka punah assembly karna. , mills ke compound imbibition hetu lagi juice tray mein se gali/kamzor juice tray ko kaatkar hatana. nai plate se sample anusar taiyar kar yathasthan lagana evam samast connection karna. , cane carrier/s.r.c./i.r.c. tatha bagasse elevator chains ko upar uthne se rokne ke liye lagi hui guides mein se ghisi/kamzor guides ko kaatkar hatana. nirdeshanusar nai guide taiyar kar yathasthan lagakar santoshjanak trial dena. , cane unloaders ke bridge/trolley drive ke ghise/kate wheels ko nirdeshanusar welding karna. , t.r.p.f. ke gale/kamzor donali chutes ko kaatkar hatana tatha purane anusar naye donali chute fabricate kar yathasthan erection karna. , cane carrier ke liye lagi idler wheel par nirdeshanusar m.s. ke ring fabricate kar lagana. , mill head stock evam t.r.p.f. head stock ke beech nirdeshanusar 25.0 mm plate se support banakar lagana. , fibrizer ke purane hammer shanks ko nirdeshanusar welding evam hardfacing kar marammat karna evam balance karna. , cane chopper/leveller ke gale hue/kamzor hoods ko kaatkar hatana tatha nai plate se naya folding type banakar lagana. , fibrizer ke pocketed type anvil plate ki pockets ki tooti plates ko nai plates se badalna. mudi hui plates ko seedha karna tatha welding kar taiyar karke nirdeshanusar hardfacing karna. , cane leveller/chopper ke rotor assembly ki ghisi hubbo ke working side evam top sides ko welding kar samatal karna evam nirdeshanusar hardfacing karna. , cane unloaders par lage reduction gear evam motors ke kamzor beds ko kaatkar naye modify karke naye bed banakar lagana tatha gear evam motor ka alignment kar trial dena. , cane carrier ki structure ke gale/kamzor columns ko nirdeshanusar plate lagakar welding kar majbooti pradan karna. , mill rollers mein sample anusar juice ring fabricate kar fit karna. , t.r.p.f. evam mill ke beech mein lage pressure chutes ki vanchhit marammat karna. , mills ke gale/kamzor juice receiving tank ko kaatkar hatana. 8.0/10.0 mm moti plate se sample anusar tank fabricate kar yathasthan fit karna evam samast connection kar leak.proof trial dena. , mill ke ju

CTN :45470341

25 Jun, 2026 NA

Sitapur - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - restoring enlarged holes in the links of the primary cane carrier, secondary cane carrier, bagasse elevator, inter-carrier, main bagasse carrier, and return bagasse carrier to the required bush size by hot forging, in accordance with the instructions of the foreman, assistant engineer, and chief engineer. budget head – manpower (off-season).

CTN :45570846

22 Jun, 2026 8.33 Lacs

Siddharthnagar - Uttar Pradesh

Tender For supply and storage of stock material (nylon kits and geo bags) for pre-flood preparedness at the departmental store located at sirwat kothi. - supply/stacking of nylon crate (1.0m x1.0m x 1.0m) including loading, unloading and stacking complete in all respect, supply/stacking of geo textile bag including loading, unloading and stacking complete in all respect

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

State Government

CTN :45317723

01 Jun, 2026 11.45 Lacs

Delhi - Delhi

Tender For supply of flood fighting material in the jurisdiction of civil division-xx - supply of wooden ballis of size 12 and thickness 3.5" including transportation, loading and unloading etc. complete at site., providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50x25 mm, fixed with nails and g.i wire on existing support complete as per direction of engineer-in-charge., providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012,morth clause 2500, of required size, mesh type 10x12 (d=100 mm with tolerance of 2%) zinc+ pvc coated, mesh wire diameter 2.7/ 3.7mm, mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(id/od), supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineer-in- charge., supply of geo textile bags manufactured using high-quality pet & pp material, ensuring superior strength, durability, and safe bulk handling. designed with a storage capacity of 100 120 kg sand and dimensions of 1.03 m 0.7 m. with a gsm range of 300 400, including transportation, loading and unloading etc. complete at site.as per direction of engineer in charge.(bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of manufacturer, batch number, the gsm and type of polymer encrypted and stitched on top corne .test certificate from approved nabl accredited iso certified laboratory should invariably submitted against each batch of material), providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc. complete with: sal wood.

CTN :45279140

02 Jun, 2026 2.89 Crore

Kamrup - Assam

Tender For procurement of flood fighting materials (mega bag) for water resources department for the year 2026-27 (zone-b). - supply of geo mega bags (size 2.00 m 1.50 m) inner dimension made of composite layers of geo-textile as per specifications below: woven geo-textile for the outer cover. the woven geo textile is pp woven with uv resistant slit film tape fibre with mavr values of the following properties. geotextile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and u.v. resistance characteristics. geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis and acids. weight (iso-9864/astm d5261) 210 gms/sqm, tensile strength (md) (astm d4595) 29 kn/m. tensile strength (cd) (astm d4595) 29 kn/m. tensile elongation (astm d4595) 5% & 25%. grab elongation (astm d4632) 5% & 25%. tensile strength (astm d4632) = 1.5 kn. uv resistance (astm d4355) = 80%/500 hrs. non-woven geo-textile for the inner layer. it is needle punched non-woven geo-textile made of 100% polyester staple fibres which are formed into a random network for dimensional stability. it should resist uv degradation, rotting and alkalis weight (iso-9864/astm d5261) 150 gms/sqm, tensile strength (md) (astm d4595) 5kn/m. tensile strength (cd) (astm d4595) 5 kn/m. tensile elongation (astm d4595) 5% & 25%. grab elongation (astm d4632) 5% & 25%. tensile strength (astm d4632) = 1.5 kn. uv resistance (astm d4355) = 35%/500 hrs. (bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of manufacturer and batch number is to be marked on each bag with wrd govt. of assam to be printed on each bag and mentioning properly the gsm and type of geo bag polymer. test certificate from approved nabl accredited and iso certified laboratory should invariably be submitted against each batch of material). for guwahati (to be supplied only as emergency flood fighting material during flood season)

CTN :45279141

02 Jun, 2026 2.89 Crore

Kamrup - Assam

Tender For procurement of flood fighting materials (mega bag) - geo mega bags (size 2.00 m ×1.50 m) inner dimension made of compositelayers of geo-textile for water resources department for the year 2026-27 (zone-a).

CTN :45279143

02 Jun, 2026 2.89 Crore

Kamrup - Assam

Tender For procurement of flood fighting materials (mega bag) for water resources department for the year 2026-27 (zone-c). - supply of geo mega bags (size 2.00 m x 1.50 m) inner dimension made of composite layers of geo-textile as per specifications below: , woven geo-textile for the outer cover. the woven geotextile is pp woven with uv resistant slit film tape fibre with mavr values of the following properties. geotextile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and u.v. resistance characteristics. geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis and acids. , weight (iso-9864/astm d5261) ≥ 210 gms/sqm,, , tensile strength (md) (astm d4595) ≥ 29 kn/m., , tensile strength (cd) (astm d4595) ≥ 29 kn/m., , tensile elongation (astm d4595) ≥ 5% & ≤ 25%., , grab elongation (astm d4632) ≥ 5% & ≤ 25%, , tensile strength (astm d4632) = 1.5 kn., , uv resistance (astm d4355) = 80%/500 hrs., , non-woven geo-textile for the inner layer. it is needle punched non-woven geo-textile made of 100% polyester staple fibres which are formed into a random network for dimensional stability. it should resist uv degradation, rotting and alkalis, , weight (iso-9864/astm d5261) ≥ 150 gms/sqm,, , tensile strength (md) (astm d4595) ≥ 5kn/m., , tensile strength (cd) (astm d4595) ≥ 5 kn/m., , tensile elongation (astm d4595) ≥ 5% & ≤ 25%., , grab elongation (astm d4632) ≥ 5% & ≤ 25%., , tensile strength (astm d4632) = 1.5 kn., , uv resistance (astm d4355) = 35%/500 hrs., , (bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of manufacturer and batch number is to be marked on each bag with "wrd govt. of assam" to be printed on each bag and mentioning properly the gsm and tyne of gen had polymer test certificate from approved nari accredited and iso certified laboratory should

CTN :44573959

05 May, 2026 NA

Darjeeling - West Bengal

Tender For bid to ras corrigendum : supply of 200 mm thick granular sub base of grading-ii 63 to 40 mm size , 150 mm thick compacted thickness wmm in two layer with coarse aggregates of grading spread , sand cushioning , geo textile , 100mm thk heavy duty rubberised mat finish paver block tiles m-40 grade of size 0.22m x 0.12m , cement opc 43 grade in packaging of 50 kg , sand coarse , graded stone aggregate coarse 40mm , quick setting compound bag of 1 kg

Carrier Bag Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government