Latest carrier scrap Tenders | Government carrier scrap Tenders

State Government

CTN :45398731

09 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For purchase/supply items of (non schedule items) and p and m (cs) (non schedule items) - "abstract for purchase/supply of non schedule items.stone boulder of size 150 mm and below at quarry", supply of quarried stone 150 - 200 mm size for hand broken at quarry, boulder with minimum size of 300 mm for pitching at quarry, gravel/quarry spall at quarry, gelatin 80% , jute netting, open weave, 2.5 cm square opening for seeding and mulching, random rubble stone, sand bags (cost of sand and empty cement bag), square rubble coursed stone, "stone bricks of size(i) 250 mm x 125 mm x 100 mmper thousand nos.", "(ii) 250 mm x 125 mm x 125 mmper thousand nos.", (i) g.i. wire (8 to 10 swg), (ii) black annealed (8 to 10 swg), "binding wire(i) annealled wire (20 to 25 gauge)", (ii) black annealed (20 to 25 gauge), expanded metal (18 gauge) 40 mm x 25 mm x 75 mm wide , "bituminastic board (for use as per expansion joint i.s.1838-1938 filter)(i) 25 mm thick", 150mm dia r.c.c.np2 perforated pipe , pressure release valve, (i) safety valve, (ii) pocket valve, "cost of burnt clay pipe of internal dia 31.70 mm (11/4"")externaldia 38 mm (11/2"")(i) 100 mm long", (ii) 225 mm long, fuse coil, bolts 20 mm dia 25 cm long, coal tar, nuts and bolts 16 mm dia375 mm long with washer etc, "palm leaves per 100 nos", check valve 38 mm dia., 38 mm dia. water hose 30m long, nx core bit 48 cts(imp), nx core bit 38 cts(imp), nx tc bit, bx tc bit, nx st reamer cell 6.5 cts(imp), bx st reamer cell 6.5 cts(imp), good quality wooden core box 3 metre long x 0.85 metre wide x0.15 metre deep with longitudinal compartment to accommodate 5 rows of 3 metre long cores i.e. total 15 metre, "abstract for p&m (cs) . (non schedule items)diesel truck (8.0 mt capacity )", air compressor (diesel operated) 325 cfm and 105 h.p, wagon drill machine including pump, jack hammer (52 lb), rotary diamond core drilling machine, sheep foot roller with d-4 tractor, diesel pump per 10 h.p., tipper (tata sk-1613 turbo bs ii tipper)

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45046609

01 Jun, 2026 7.86 Crore

Leh - Jammu And Kashmir

Tender For bid to ras providing of goods transport service – per mt per km based service - construction material; tipper/dump truck; large tipper,goods transport service – per mt per km based service - construction material; tipper/dump truck; large tipper

CTN :45331884

10 Jun, 2026 NA

Allahabad - Uttar Pradesh

Tender For providing of customized amc/cmc for pre-owned products - cmc of dumper truck; tata; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of dumper truck; tata; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of dumper truck; tata; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of dumper truck; tata; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of dumper truck; tata; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of 14cum tipper truck; tata and mahindra; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of 14cum tipper truck; tata and mahindra; comprehensive maintenance contract (cmc); not applicable; yes,customized amc/cmc for pre-owned products - cmc of 14cu

State Government

CTN :45341798

02 Jun, 2026 6.48 Lacs

Mayabunder - Andaman And Nicobar Islands

Tender For annual repair mo rural road under nacd, apwd, mayabunder during 2026-27. sub work- providing the service of excavator and tipper truck with fuel and driver as and when required for a period of 06 months under sub - division no.i, ii iii, nacd, apwd, mayabund

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45303631

30 May, 2026 NA

Ranchi - Jharkhand

Tender For e quotation for none schedule item rate - diesel truck (8.0 mt capacity ), air compressor (diesel operated) 325 cfm and 105 h.p, wagon drill machine including pump, jack hammer (52 lb), rotary diamond core drilling machine, sheep foot roller with d-4 tractor, diesel pump per h.p., tipper (tata sk-1613 turbo bs ii tipper)

CTN :45318951

16 Jun, 2026 NA

Raebareli - Uttar Pradesh

Tender For providing of goods transport services - per mt - collection & loading, transportation and unloading of released scrap generated from fwpmcf to mcfscrap depot for a period of 1 year on per mt basis; tipper/dump truck; as per requirement

State Government

CTN :45192386

26 May, 2026 NA

Karur - Tamil Nadu

Tender For transportation of imported coal or indian coal or raw lignite or limestone from tnpl unit 1, kagithapuram to tnpl unit 2 at kagithanagar through truck or tipper