Latest carrying case Tenders | Government carrying case Tenders

Central Government/Public Sector

CTN :45737277

20 Jul, 2026 NA

Ambala - Haryana

Tender For supply of transmission measuring set (tms kit) complete with tone generator and db meter having 470-, 600-and 1120-ohm output impedance range, less than 2% distortion, more than 60 db degree of balance, transmission level of +10 dbm to -50 dbm in 10 db steps and +1 to -10 db continuous variable, accuracy +- 0.2 db, lcd digital panel meter, 3 & half digits display, rechargeable ni-mh battery. complete set with all connection lead & accessories. (connection cables, test leads, user manual, carrying case). [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728540

22 Jul, 2026 NA

Rewa - Madhya Pradesh

Tender For supply of digital gloss meter 60 degree with calibration standard tile, calibration certificate, instruction manual, carrying case & usb cable. make:- rhopoint or similar [ warranty period: 30 months afterthe date of delivery ] ]

Central Government/Public Sector

CTN :45731612

06 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For digital pressure gauge as per the following specification: - 1). range: 0 to 16 bar, 2). pipe connection: 1/4 inch male bsp, 3). resolution: 0.01 bar, 4). accuracy: +/- 0.5% full scale, 5). pressure units should be in bar, psi and kg/cm2, 6). instrument dimensions: 80 mm -105mm, 7). instrument casing: stainless steel/abs, wetted parts: stainless steel. 8) battery powered make : ascorp/equinox/wika/excel/insize/winters. note: - user manual, carrying case & calibration certificate from nabl accredited or govt labs should be produced along with supply. [ warranty period: 12 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government And Public Sector

CTN :45730821

07 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of portable handheld digital gauss meter (tesla meter) to model no. d20b of m/s lab magnet orexactly equivalent, complete with probe, battery, carrying case, calibration certificate, warranty certificate,technical datasheet, and all standard accessories. specifications: 1) type : digital, 2) measurement : ac/dcmagnetic field, 3) range : up to 20,000 gauss, 4) resolution : 0.1 gauss, 5) accuracy : +/- 1.0% or better, 6) display : digital lcd, 7) probe : suitable for magnetic surface measurement, 8) power source : battery operated, 9) battery life : minimum 18 hours. note: the offer shall accompany the catalogue / brochure of theitem. [ warranty period: 12 months after the date of delivery ] ]

CTN :45731553

02 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of cordless 1/2 inch square drive impact wrench with 18volt, 5ah battery,maximum weight lessthan 2kg, capable of 230nm tightening torque along with carrying case, baterry- 02 nos, battery charger and charging cord. make:- makita model dtw251rtj or similar model of snap-on, or bluepoint or ingersoll rand or dewalt or milwaukee or hilti. [ warranty period: 30 months after the date of delivery ] ]

CTN :45733158

08 Jul, 2026 NA

Multi City - Odisha

Tender For auction sale of others - lot no.- sse/cs/2026-27/15 desc. - (1) wag-9 lipped racer of wag9 loco - 20 nos. wt..=97.600kgs (2) hanger lever( kbil/ftil make)of wag-9 loco -72 nos. wt..= 907.200 kgs (3) wheel set guide of wag-9loco -15 nos. wt..= 361.500 kgs (4) wag -9 plain racer of wag9loco -20 nos.wt.. 76.200kgs (5) sets of cover of axle box of wag-9loco - 05 sets wt.. 657.500 kgs (6) gear case assembly of wag-9loco -10 nos. wt.. = 2097 kgs (7) torque arm of wag-9 loco - 10 nos. wt.. 241 kgs (8) axle box of wag-9 loco -20 nos. wt.. =2160 kgs (9) miscellaneous (pins ,bushes ,link, friction arm,fasteners, brake equalizers plate ,washers, cotter pins ,turnion,clevis,arm spring ,adjusting equipment ,spacer & tie bar ,equalizer, hanger inside & outside ,nut bolts , safety sling, threaded bolt ... etc) wt..= 1000 kgs total ferrous wt..= 7.598 mt

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

Central Government/Public Sector

CTN :45513751

03 Jul, 2026 99.52 Lacs

Ahmedabad - Gujarat

Tender For corrigendum : supply of tirfor two pint five tor one point five t , tirfor 5t or 3 t , pull lift zero point seven five t or zero point eight t , ladder trolley suitable to move on railway track , earthing discharge rod complete , aluminium straight ladder extendable type , first aid box made of gi or al sheet , stretcher two fold type , set of 4 fire buckets of 10 l capacity , portable fire extinguisher dry chemical powder , portable fire extinguisher dry chemical powder type and suitably mounted on trolley , d shackeles set of alloy steel , set of steel slings with eye on each end , stainless steel digital micro meter , bench vice 6 inch suitably mounted on steel table , canvass tarpaulin 12m by 12m with ropes and spikes of adequate size , portable 5kva silent diesel gen set with battery push button start , binoculars , vernier calipers digital , digital multi-meter , high sensitivity digital multi-meter , aluminium self supporting stool type magjic pole ladder 8 feet long , drop out fuse pull rod made of fibre body extension type and suitable for use on 25 kv ohe , half inch square drive socket set containing 22 sockets with 5 attachments packed in power coated carrying case , transformer oil acidity testing kit with all accessories , portable arc welding machine 250 a capacity , clip on digital tong tester suitable for measuring ac current 600amp , digital breaker time interval meter , insulation megger with voltage selectable range of 250v and 500 v and 1000 v , supply of automatic transformer oil bdv testing kit , transformer oil filtration plant 125 litre per hour capacity , auto transformer which should be close type dimmer , load cell tester suitable for 40 ah and 200 ah battery , spanners set , 52 pieces socket set with storage case , insulation megger with voltage selectable range , supply of digital ground or earth tester , thermal imaging camera with software , fully automatic capacitance and tan delta test set , transformer oil as per is 12463 , ratchet lever hoist three point two ton , ratchet lever hoist one point six ton , universal come along clamp , extension ladder 2 by22 , pillar drill machine , bench grinder , portable welding generator set , industrial safety belts and harnesses , heavy duty contact wire cutter 36 inch suitable to cut copper contact wire 107 sq.mm , supply of dropper wire cutter size 12 inch. , single sheave pulley block wheel size three point five inch by half inch , single sleave pulley of fibre of size three point five by half , single sleave pulley blockof steel of size six by one , polyester slings with 1 tonne , double ply polyester webbing slings , ply polyesterwebbing slings with load capacity 3 tonne , polyester slings of 4 m and 10 m , supply of contact wire splicing jig suitable to splice 107 sqmm contact wire , angle cutter electric 355 , supply of 5 drill bits rotary hammer drill ndrf , fiber ladder of 11m and 8m , atd bearing removal tool , hydraulic crimping tool , spring loaded stabilizer auger type post hole digger , digital spirit level , single point laser class ii handheld digital infrared thermometer , hydraulic dyanamometer 10 ton capacity with steel carrying box , 4 stroke engine telescopic pole , digital camera , hand operated rotary barrel pump , chain pulley block 3 tonne capacity with standard lift 3 meter as per is 3832 , fibre body handheld electric blower , magic pole ladder 8 feet made out of aluminium side section , transformer oil sampling bottles, size 1500 millilitre in box. , contact resistance meters measuring range 100 milli ohm , digital lcr meter 3 one by two digit 1999 counts , supply //bid details 2 / 62 of magnetic drill machine with magnetic stand , rechargebale portable battery operated hand cutter

CTN :45214269

01 Jul, 2026 NA

Bardhaman - West Bengal

Tender For bid to ras supply of digital slr camera with macro and portrait lenses , camera carrying case , tripod for camera , ring flash led , standard flash for camera mounting , slave flash units with reflectors , background screen with stand , cheek retractors self retaining pediatric size , cheek retractors self retaining adult size , cheek retractors non self retaining double ended ss , intra oral mirrors set comprising occlusal adult 01 occlusal pediatric 01 lateral 01 , ss tray with lid 12 x 15 size , cheatle foeceps , upright chair with adjustable head rest

Carrying Case Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector