Get complete information related to latest Cartridge Filter Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cartridge Filter Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cartridge Filter Tenders.
Tender For supply and delivery of chemicals and glassware for the 15 (fifteen) nos. laboratories in the district of south 24 parganas under alipore division, p.h.e. dte. for the period of 180 (one hundred eighty) days. (2nd call) - glassware & other things required for 15 laboratories of alipore south 24 paganas district for 6 monthsample bottle(pbc)(200ml), sterile sample bottle(tarsons)(100ml), aluminium foil 9mt- hindalco/equivalent, tissue paper (medium)- 2x21mt, nitrile gloves(7.6")(100ps), zinc cutter, lighter for mft, lab aprone superior quality,xl size, mask (pollution mask acid fume protected), lab shoe (pair), first aid kit comprises of absorbent cotton (100gms), antiseptic liquid(1no), leucoplast, t-bact/ silverx/similar(10gm),scissors, starile cotton gauge(5 nos), tobe supplied with in covered box, bacteriologychromogenic coliform agar, for simulteneous determination & count of escherichia coli and total coliforms in water samples as per iso 9308-1:2014, 100 gm pack, consumables for bacteriological analysis by mf technique, membranefilter- cellulose nitrate, sterile- individually packed, white membrane, gridded, 47mm dia, 0.45 micron porosity, pack of 100 circles, consumables for bacteriological analysis by mf technique, radiation sterilie plate 15x60mm, 250 nos a pack, total hardnessedta n/50 solution, for total hardness analysis (500ml/pack) 500 ml pack, ammonia buffer solution for total hardness analysis (500ml/pack), phph buffers - 25 c : clear, colourless ph buffer solutions. tested at 25 c and certified by iso 17025 accredited test method. nist/metrological traceable, ph: 4.00 0.01@25 c in 500 ml, ph buffers - 25 c : clear, colourless ph buffer solutions. tested at 25 c and certified by iso 17025 accredited test method. nist/metrological traceable, ph: 7.00 0.01@25 c in 500 ml, ph buffers - 25 c : clear, colourless ph buffer solutions. tested at 25 c and certified by iso 17025 accredited test method. nist/metrological traceable, ph: 10.00 0.01@25 c in 500 ml, conductivity & tdssupply of conductivity/tds standard-25˚c certified by iso 17025 accredited test method, nist traceable 1431us/cm at 25˚c in 500 ml botttles, ironreagent suitable for spectrophotometric analysis of iron in potable water, min range 0.02-3.00 mg/l soluble iron (1000 tests/pack), iron standard solution 1000 mg/l traceable to srm from nist traceable (125 ml/pack), manganesereagent suitable for spectrophotometric analysis of manganese in potable water min range: 0.01-0.7 mg/l of manganese, (250tests/pack), manganese standard solution traceable to srm from nist traceable (125 ml/pack), residual cisupply, delivery demonstration of residual chlorine kit complete with comparator box with continuous colour scale disc for residual chlorine & total chlorine analysis, range/graduation: 0/0.2/0.4/0.6/0.8/1.011.211.4/1.6/1.8/2.012.5/3.0/3.5/4.0, . to besupplied with unbreakable cells, frosted on two sides 13.5 mm path length, volume 10 ml, with lid, easily dispersible dpd tablet for residual chlorine- 530nos & dpd tablet! for total chlorine-30 nos, tablet crusher, carrying box, operating manual. total residual chlorine test should not be less than 530 tests.delivery & demonstration to be made at different places of west bengal as perdirection of engineer- in-charge. make: lovibond|merck, dpd tablet for residual chlorine, easily dispersible, suitable for comparometric determination, pack of 250 tabs, arsenichydrochloric acid min: 36.5%, analytical quality & acs grade, arsenic content: 0.01 ppm max. (500ml/pack), tin (ii) chloride dihydrate analytical quality solubility: 10% solution in dil. hcl should be clear & assay: min. 99.00%, (100gm/pack), zinc granules (arsenic free, as content: 0.00001% max) (500gm/pack), silver diethyldithiocarbamate for arsenic analysis, acs grade assay: 99% min (5 gm/pack), chloroform analytical quality, dry solvent, water content maximum: 0.01% max (500 ml/pack), arsenic standard solution traceable to s
Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin
Tender For tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based putty , 15 mm cement plaster , painting with synthetic enamel paint , 6mm cement plaster of mix , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , earth work in excavation , providing and laying in position specified grade of reinforced cement concrete , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , demolishing , brick work with common fly ash bricks , half brick masonry with non modular fly ash , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing brass bib cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers , providing and fixing pvc door frame , 30 mm thick factory made polyvinyl chloride door shutter , providing and fixing isi marked flush door shutters , neat cement punning , providing and fixing gi pipes , 40 mm dia nominal bore , clearing grass and removal of the rubbish , excavating , supplying and filling of local earth , dismantling colour coated roofing sheet , providing and fixing precoated galvanised iron profile sheets
Tender For corrigendum : a. emergency lube oil pump flow 25 m3 per hr discharge pressure 4.5 kg per cm2g api 610 b. dc tefc sq cage motor shunt wound 11 kw 220v 2900 rpm 3 step resistance c. flexible membrane diaphragm coupling d. motor shims
Tender For spare parts for kraz veh - strut bench part no 255b8506110, sun visor part no 256b8204012, switch ignition part no bk8563708000, switch membrane part no 1203720095, switch vk70 turn indicator part no vk7003726050, tail light mtg plate with guard part no nk, thin alluminium flat channel 1/2", l-16 part no nk, turn indicator pilot lamp(256-3803020) part no pd203803000p, turn indicator pilot pd20l part no pd203803000l, turn indicator relay rs 401 part no 4013726000g, two way switch part no nk, under bonnet light part no 256b3715024, warning lamp lh/lh tail lamp assy part no 214b3716010, washer part no 2102919038a, weather strip wind shield part no 2145206050, wing nut, slotted link part no 2125204024a2, wire from bty to starter relay part no 255b3724060a