Latest cash counter Tenders | Government cash counter Tenders

CTN :45284241

28 May, 2026 NA

Malda - West Bengal

Tender For supply & installation of 04 seater cubicle work station table size:750w x 600d x 750/1050ht. (in mm), 45 mm thick panel 1050ht.750 x1050 & 600 x1050,45 mm thick panel 1050ht.p/f of panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x16.5mm with continuous vertical locking arrangement for interconnection of two adjacent panels. top trim is of aluminum section of size 45x12mm and snap fitted on its base of size 45x20mm. the aluminum frame work is supported on lower and upper partition block. bottom block is made up of 9mm prelaminated particle board of desired shade which is pasted on 33x25mm thick particle board baton frame, which is properly screwed to end post and bottom electrical race way. upper block is fixed above the table top and is made up of particle battens fixed with 9 mm thick pin board and cloth of desired shade, optionally white board or glazing can be provided instead of pin board. raceway- one bottom raceway is provided as standard for drawing wires along the width of panel. the raceway is covered with aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip. the modular switch & socket plates can be mounted & punched onto the raceway panels with easy cable connectivity & accessibility in case of any repairs etc. table tops to be made up of 25mm thick pre laminated particle board. the tops are supported on partition with the help of cantilevers. all work tops fixed at the standard anthropometric working height of 750mm from the ground level & finished with well filleted edges, thus making those users friendly. a circular hole is provided on every w/top to facilitate the easy connection of cpu & monitor wires & is covered with a modular wire manager made in abs. gable end is made up of 18mm pre-laminated particle board of desired shade and screwed to top with help of brackets. used to support w/tops at the exposed ends giving an openness to all workstations, cubicles etc. the keyboard trays are made out of 18mm thk plpb & mounted under the worktop with sliding channels [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45287000

09 Jun, 2026 17.14 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For miscellaneous civil repair and construction work at 33/11 kv substations jain bagh and raiwala cash counter centre, dist saharanpur.

Central Government/Public Sector

CTN :45270376

03 Jun, 2026 18.70 Lacs

Bhopal - Madhya Pradesh

Tender For supply of dining table 4 seater 4 feet and 0 inch x 2 feet and 8 inch x 2 feet and 6inch , dining table 6 seater 4 feet and 0 inch x 2 feet and 8 inch x 2 feet and 6inch , dining cash counter unit 1500mm x 600mm , dining chair , seminar chair , sofa

corporations/Associations/Others

CTN :45278448

09 Jun, 2026 20.99 Lacs

Meerut - Uttar Pradesh

Tender For roof treatment of sgr and 04 nos. rooms and earth filling in the yard, construction of room for cash counter, painting and other civil works at 33/11 k.v s/s (sakoti, mahlka and lawar) distt-meerut.

corporations/Associations/Others

CTN :44988555

25 May, 2026 2.00 Lacs

Sardhana - Uttar Pradesh

Tender For corrigendum : regarding annual maintanence of computer/laptop/printer/ups alongwith its parts including repairing at site in the area of edd-sardhana, meerut and its edsd-i/ii/iii and cash counters under edc-2, meerut.

CTN :44948111

26 May, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ]

CTN :45199250

26 May, 2026 NA

Bareli - Madhya Pradesh

Tender For supply and installation of interior panelling, partition frame and frp modular toilet for middle basic unit (ndtc/ec-01, mc-02 & tc-01) of vande bharat chair car rake as per specification icf/md/spec-385, rev-00 with amendment no.1 to 5 & annexure-i including pasting of 3m brand film or equivalent of 80 microns thickness on the inner side of double sealed window glass and supply and installation of following items (1) exhaust duct assembly arrangement as per mcf design l. no.- rbl- md56211 dated - 08.05.25, (2) hinged glass door for fire extinguisher shall be as per icf cai no- b-2024/05 instead of fixed polycarbonate glass. (03) installation of acrylic cover sheet for emergency hammer arrgt., in trainset coaches as per icf cai no.- b-2024/06 (4) replacement of existing wash basin drain pipe with modified wash basin drain pipe as per icf cai no.- a-2025/06 . note -1 for spare: following items for middle basic unit to be supplied in a separate box (1) toilet door - 1 nos. (2) toilet door latches/ handles- 2 nos. (3) toilet mirror - 2 nos. (4) toilet led light - 2 nos. (5) toilet tap - 2 nos. (6) toilet wash basin sink - 1 nos. (7) toilet dust bin door -1 nos. (8) toilet dust bin container - 1 nos. (9) window roller blind 16 nos. and (10) electrical cubicle doors - 1 set. . note -2 bom & drawings must be submitted at the earliest for approval after placement of po. so that timely approval for the same may be communicated before prototype approval. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :44740417

18 May, 2026 NA

Warangal-T - Telangana

Tender For corrigendum : supply of collaborative modular cubicle with al

State Government

CTN :45145962

25 May, 2026 96.45 Lacs

Dehradune - Uttarakhand

Tender For supply, installation testing and commissioning at cash counter banjarawala kargi section under edsd turner road.

State Government

CTN :44960306

13 May, 2026 9.15 Lacs

Goa - Goa

Tender For supply and installation of electrical consumables for day-to- day maintenance for a period of 02 years at goa college of engineering. - supply, installation, testing and commissioning of 18 /20 watt led tubelight luminaire complete with all accessories etc. as required of make: bajaj cat no. bclab 20wledp/make: crompton cat no. ccs- 100-20- 65-hl2-dp-nwh;m ake jaquar cat no. lglz01020xw or equvivalent in wipro/philli ps/great white etc as per instructions of the engineer incharge., supply of 9w led bulb , of make panasonic, ( cat no:pbum36093) or equivalent in bajaj/havell s/panasonic/phi lips /jaquar/le gero/orient/bio con. complete as required. (equivalent to be approved by engineer in-charge ), supply and fixing of 2.5 microfarad fan capacitor of reputed brand complete as required., unarmoured pvc /xlpe1100 v cable 2 core 10 sq.mm aluminium, supplying and fixing brass batten/ angle holder including connections etc as required., re-wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in the existing surface/ recessed steel pvc conduit or casing caping including dismantling as required.; group b, supplying and drawing following sizes of frls pvc insulated copper conductor single core cable in the existing surface/ recessed steel pvc conduit or casing caping including dismantling removing old wires as required.;(11) 2 x 2.5 sq.mm, supplying and fixing following size modular pvc box alongwith modular base and cover plate for modulator switches in recess etc. as required;(i) 3 module cat b, supplying and fixing following size modular pvc box alongwith modular base and cover plate for modulator switches in recess etc. as required;(k) 6 module cat b, wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(b) group b -- with cat b modular accessories, supply and erecting of 56 inch (1400mm sweep) ceiling fan double ball bearing type complete with all accessories .; cat b, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(f) sp cat b, supplying and fixing 40 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(f) sp cat b, supplying and fixing 63 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(j) tpn cat b, wiring for circuit/ submain wiring alongwith earth wire with the following sizes of fr pvc insulated copper conductor single core cable in the independent pvc casing capping of appropriate size as required.;(b) 2 x 2.5 sq. mm + 1 x 2.5 sq.mm earthwire (20mm casing ), erection of wall bracket/ ceiling fittings of all sizes and shapes containing upto two gls lamps per fitting complete with all accessories including connections etc as required., din hrc fuses size size 0 200a, supply installation testing and commissioning of electronic type three phase energy meter (kwh) 4 wire isi marked in polycarbonate or sgheet steel body ( base mounting type) with counter display /lcd display with elt in class 1.0 50 hz 240 v. ac duly tested by mrt along with test certificates complete as required of following capacity of make l & t only.;(c) 50 to 100 a, providing and fixing following capacity tpn disconnector fuse switch unit in ss enclosure without hrc fuses including drilling holes in cubicle panel making co

Cash Counter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government