Latest casing ring Tenders | Government casing ring Tenders

State Government

CTN :45732868

03 Jul, 2026 2.36 Lacs

Multi City - Telangana

Tender For overhauling and re-conditioning of 120hp hsc pump set and induction motor no.03 including replacement of bearing shaft sleeves, casing rings, glands and other minor parts damaged if any with new parts at chennapur pump house, chandrapuri colony ward, keesara circle under eam cell, malkajgiri zone, hmwssb.

Central Government/Public Sector

CTN :45498219

10 Jul, 2026 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : supply of fp9750683030 booster pump for cvp singrauli , fp9750683030 booster pump for cvp sipat , fp9750683501 impeller with nuts and accessories , fp9750683510 impeller shaft with keys , fp9750683528 shaft sleeve , fp9750683536 wearing ring impeller , fp9750683544 wearing ring casing , fp9750683552 sleeve bearings for pump , fp9750683560 thrust bearing , fp9750683579 pump and drive motor coupling assembly , fp9750683587 pump to drive motor coupling bushes , fp9750683595 gland assembly mech seal , fp9750683609 motor for lubrication pump

CTN :45719844

20 Jul, 2026 25.04 Lacs

Murshidabad - West Bengal

Tender For procurement of spares for booster pump for sgtpp - procurement of procurement of spares for booster pump for sgtpp., rotor assy. booster pump-fa1b75 for mdbfp of 500 mw , (balanced condition), set contain one shaft, one impeller, impeller neck ring-02 nos, thrust collar, coupling key, pump drg. no- ( drg. no-hy-dg-373-139-a017 moc-shaft-bs-en-10250-4, impeller-bs-en-10213-2, impeller wear ring-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. approximate shaft length-1725 mm, shaft run-out should be within 0.05 mm. for mdbfp , direction of rotation-anti clowise viewed from non-drive end. rotor assembly should be in balanced condition. balancing document should be submitted during delivery. all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller for booster pump-fa1b75, for booster pump of 500 mw. , part no-2 , pump drg. no-hy-dg-373-139-a017, moc- bs en 10213-2 ( in balanced condition. balancing document should be submitted during delivery. moc-impeller-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. all give dimensions are approximate & actual dimensions must be at per given drawing no. ), shaft for booster pump-fa1b75 for booster pump of 500 mw. , part no-5 , pump drg. no-hy-dg-373-139-a017, moc-bs en 10250-4 or equivalent ( shaft run-out should be within 0.05 mm. moc-shaft-bs-en-10250-4, approximate shaft length-1725 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller nut, booster pump-fa1b75 for booster pump of 500 mw , part no-13, pump drg. no-hy-dg-373-139-a017, nut thrust collar for booster pump-fa1b75 , pump drg. no-hy-dg-373-139-a017, casing wearing ring, f-m/cd-bp-fa1b75 for booster pump ( moc-fv 520 b (13% cr. steel). approximate dimension od-340 mm, id-320 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), wearing ring,impeller,fa1b75 for booster pump fa1b75 ( moc-bs-en-10213-2, approximate dimension od-320 mm, id-300.20 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. )

Central Government/Public Sector

CTN :45704482

06 Jul, 2026 NA

Medak-T - Telangana

Tender For supply of fp9750707052 drain pump for cvp without piping and valves , fp9750707060 drain pump for cvp without piping and valves , fp9750707508 impeller with nuts , fp9750707516 impeller shaft with keys , fp9750707524 shaft sleeve sleeve for drain pump , fp9750707532 wearing ring impeller for drain pump , fp9750707540 wearing ring casing for drain pump , fp9750707559 bearings for pump and drive , fp9750707567 thrust bearing thrust bearing collar , fp9750707575 pump drive motor coupling asly guard , fp9750707583 all shaft couplings with fasteners , fp9750707591 pin and bushes for all couplings , fp9750707605 gland packing gland assly mech seal , fp9750707613 motor for drain pump , fp9750707630 impeller with nuts , fp9750707648 impeller shaft with keys , fp9750707656 shaft sleeve sleeve for drain pump , fp9750707664 wearing ring impeller for drain pump , fp9750707672 wearing ring casing for drain pump , fp9750707680 bearings for pump and drive , fp9750707699 thrust bearing thrust bearing collar , fp9750707702 pump drive motor coupling asly guard , fp9750707710 all shaft couplings with fasteners , fp9750707729 pin and bushes for all couplings , fp9750707729 gland packing gland assly mech seal , fp9750707745 motor for drain pump

Central Government/Public Sector

CTN :45713097

17 Jul, 2026 23.82 Lacs

Korba - Chhattisgarh

Tender For supply of shaft sleeve de nde moc-bronze , bearing housing unit , split gland br , rotating assy bronze ftd , casing wearing ring del 6100036627 , casing wearing ring suc 6100036628

corporations/Associations/Others

CTN :44997638

02 Jul, 2026 NA

Puruliya - West Bengal

Tender For corrigendum : supply of seal lip for air dryer system md300, make: - atlas copco, part no. - 1627 3826 03 , set wearing parts, part no. : 2901063300 for compressor, oes/oem: atlas copco , sealing ring for air dryer system md300, make: - atlas copco, part no. - 1614 7606 00 , demister for air dryer system md300, make: - atlas copco, part no. - 1614 7605 10

Central Government/Public Sector

CTN :45704394

11 Jul, 2026 NA

Dakshina Kannada - Karnataka

Tender For tender for supply of spares for 56 ga04a b pump - diff with guidevane pn 1291141292232 , enclosed impeller pn 1291141513232 , shaft pn 12914ae121251 56-ga04a b , int bush guide vane pn m001090700232 , int bush diffuser pn m001100700232 , liqud deflector pn m010170700251 , lock washer pn b183108000050 , lock nut pn b213508000052 , set of keys pn b101208060251 , set of o-rings pn 127b7f0911a502n085 , wear ring del pn m003090700232 , casing ring suc pn m003100700232

Central Government And Public Sector

CTN :45704009

17 Jul, 2026 NA

Chittorgarh - Rajasthan

Tender For tender for supply of kirloskar brothers limited make cooling and purification pump spares - impeller-15100 , pump shaft-18001 , casing ring-19000 , casing ring-19100 , impeller ring-19200 , impeller ring-19300 , drip pan-22600 , liquid deflector-23600 , deflector-de-23603 , bearing housing-24000 , latern bracket-24800 , support foot-25100 , shaft sleeve-31500 , set of keys-32000-32100 , impeller nut-33000 , lock nut-33600 , st box bushing-35000 , quenching bush-36000 , lock washer-41500 , constant level oiler-44300 , oil breather-4440 , internal circlip-48500 , set of oil seals-50000 , set of gaskets-51104-51400-51504-51604-68204 , set of o rings-52301 , impeller-15100 , pump shaft-18001 , casing ring-19000 , casing ring-19100 , impeller ring-19200 , impeller ring-19300 , drip pan-22600 , deflector-de-23603 , liquid deflector-23600 , bearing housing-24000 , latern bracket-24800 , support foot-25100 , shaft sleeve-31500 , set of keys-32000-32100 , impeller nut-33000 , lock nut-33600 , st box bushing-35000 , quenching bush-36000 , lock washer-41500 , constant level oiler-44300 , oil breather-44400 , internal circlip-48500 , set of oil seals-50000 , set of gaskets-51104-51400-51504-51604 , set of o rings-52301 , casing cover -22000 , casing cover-52301

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Casing Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors