Latest casnub bogie Tenders | Government casnub bogie Tenders

Central Government/Public Sector

CTN :45702844

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot miscellaneous scrap - condemned complete mvsl/mvsi motor, mvsi with dome, mvrh unit, mcpa body complete (aux compressor), mph complete unit, mvrf rotor & mvsl/mvsi stator of conventional locomotive. total weight= 6.215 mts (fe= 5.56234 mts, copper= 0.4705 mts, aluminium= 0.17122 mts, insulation= 0.011 mts). for custodian information ss-11 no. nkj/trs/scf/26-27/11 dt. 01.06.2026. ds-8 note no. 020745 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

Central Government/Public Sector

CTN :45702847

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of others - aluminium released different type aluminium items of conventional locomotive ( different & worn out) ie- jumper conk, mu coupler cover, smgr cam, gr front cover, phgr pump cover, smgr interlock plate, mom dial plate, mu jumper, rest box, gr base housing, smgr base plate, gr base housing, cgr frame side, roof line busbar. evphgr base, smgr cylinder piston, vcb relay valve, foot operating switch (mvrf blade, silica gel pot, cgr frame, gr base housing, smgr base plate, horn, wsm, c-3w, air dryer, marker light, aliminium patti, gr front cover smgr base, gr side cover, a33 bushing stud, smgr cam big-121, smgr side plate- 04, smgr cam small 42, smgr piston-08, c-3w horn (ht+lt) wsm, panto pan (horn), alluminium impeller, alluminium released from siv choke, modules & mpcs cards, siv isolator, aliuminium patti, hom foundation base, vcb shafting head, panto horn/panto pan released from ac loco with ferrous attachment. weight= 3.826 mts (aluminium= 3.49244 mts, ferrous= 0.33356 mts). for custodian information ss-11 no. nkj/trs/scf/26-27/9 dt. 01.06.2026. ds-8 note no. 020724 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

Central Government/Public Sector

CTN :45702819

06 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap condemn radiator with ferrous and non ferrous attachment released from electric locomotive etc. ferrous 2719.50 kg copper 1580.25 kg and brass 1764 kgs total 6063.75 kgs (mt r/o- 6.060 mts ) sse lot no st/trs/cs/scrap/radiator/06/05 dt 23.04.2026. note 1: delivery can be given by actual weight 2. lot to be sold on as is where is basis is any other material except description is found while delivery which is strictly restricted and it cannot be delivered.3. the quantity shown against lot is approximate and there may be variation in weight as such variation of +/- 10% may be occurred due to average weight assessed. 4. it is strictly advised to the bidder to see the lot and loading point personally before bidding the lot in e -auction. no claim will be entertained after sale of the lot 5. cutting may allowed for easy loading and arrange by the firm/purchaser

Central Government/Public Sector

CTN :45702821

06 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of others - scrap condemn transformer with ferrous and non ferrous attachment qty-03 nos hett 5400 kva damaged and dismantle released from electric locomotive ferrous 19230 kg and copper 4629.00 kg aluminum 924 kg insulation 357 kgs total weight 25140 kgs sse lot no st/trs/cs/scrap/transformers 06/06. note 1: delivery can be given by actual weight 2. lot to be sold on as is where is basis is any other material except description is found while delivery which is strictly restricted and it cannot be delivered.3. the quantity shown against lot is approximate and there may be variation in weight as such variation of+/- 10% may be occurred due to average weight assessed. 4. cutting may allowed for easy loading and arrange by the firm/purchaser .5. it is strictly advised to the bidder to see the lot and loading point personally before bidding the lot in e -auction. no claim will be entertained after sale of the lot

Central Government And Public Sector

CTN :45714235

16 Jul, 2026 NA

Multi City - Multi State

Tender For supply of compressor unit of hhp diesel locomotive [ warranty period: 30 months after the date of delivery ] ]

CTN :45710493

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, bobrnm1, bobrm1, bcnm1,boxnhl bvzc, bobrnel & boxnr wagons no as following: [1] scr 10099663802 boxnm1 [2] er 72029662187 bobrnm1 [3] er 72029960313 bobrm1 [4] cr 30019060122 bcnm1 [5] nwr 22111111109 boxnhl [6] scr 85099560413 bvzc [7] ser 85079560471 bvzc [8] ser 10079666892 boxnm1 [9] er 72029760012 bobrnel [10] ser 10079665581 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (112.90 mt) is the lot quantity (112.90 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, bcnm1,boxnhl & boxnr : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1, bobrm1 & bobrnel : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (iii) for bvzc wagon : wheel set with rb andaxle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.

CTN :45710494

06 Jul, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnm1, boxnr, boxnlw, bcnm1 & bobrnmi wagons no as following: [1] scr 10099523700 boxnm1 [2] scr 25099661369 boxnr [3] secr 14140762292 boxnlw [4] scr 30099186132 bcnm1 [5] ser 10079666083 boxnm1 [6] er 72029563392 bobrnm1 [7] scr 10099660689 boxnr. condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at thetime of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (79.190 mt) is the lot quantity (79.190 mt) as mentioned in the catalogue.[2].the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittingsas follows:- (i) for boxnm1, boxnr, boxnlw & bcnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate withsafety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024.(iii) sl. no 04 fitted with casnub bogie 22w(m) which is to be sold with wagon.

CTN :45714286

18 Jul, 2026 NA

Multi City - Multi State

Tender For supply of electronic control module suitable for sil vaporid air dryer as per sil drg. no. 09872401 andwabco part no. 63351, for diesel locomotive [ warranty period: 30 months after the date of delivery ] ]

CTN :45714290

18 Jul, 2026 NA

Multi City - Multi State

Tender For supply of pressure switch for sil make air dryer, wabco pt. no. : 653352 or sil drg. no. : 09871901, for diesel locomotive. [ warranty period: 30 months after the date of delivery ] ]