Latest cast iron block Tenders | Government cast iron block Tenders

Central Government/Public Sector

CTN :43039170

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

Central Government/Public Sector

CTN :43039171

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Central Government/Public Sector

CTN :43039172

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

CTN :43020069

17 Dec, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of thread no 40 , bleach 30gm vlcc , hair remover cream 50gm , wax 500gm , massage cream 200gm , scrub 100gm , cotton 200gm , rose water 100ml , alovera gel 200gm , chandan pack 25gm , manicure kit , pedicure kit , sanitizer , nail paint 5ml el18 , facial kit diomond , toner 100ml , oil 200ml , shampoo dove 200ml , powder 300gm , small towel , big towel , conditioner dove 200ml , hair spa 200gm , hair serum 115ml , nail paint remover 30ml , soap dove , soap pears , ms flats 50 x 10 per kg , ms flats 65 x 10 per kg , ms flats 75 x 10 per kg , engine oil per ltr , old dhoti , cast iron block 60 x 60 x 60 , cast iron block 70 x 70 x 120 , cast iron blco 120 x 40 , ms flats 100 x 6 per kg , ms round rod 50mm dia , ms round rod 40mm dia , ms flats 50 x 6 per kg , greas 1kg , grear oil per ltr , brake oil per ltr , distil water per ltr , thread white per box 100pcs , thrad colour per box 100 pcs , brown paper , hook and eyes per pkt 10 pcs , pasting paper , bukram per mtr , cotton cloth per mtr , vizi vizi cloth per mtr , polyster cloth per mtr , silk cloth per mtr , scissor , ink pad , allout machine , cup plate per set , tumbler glass per pcs , tea tray , pencil per pkt 10pcs , lime powder per kg , garden scissors , black paint per ltr ) /bid number: gem/2025/b/6956691 * /dated: 02-12-2025 & & / bid document1 / 47

corporations/Associations/Others

CTN :42988946

06 Dec, 2025 9.87 Lacs

Multi City - Telangana

Tender For providing of chainlink fencing and providing of pre cast covers in various locations of ward no 111(p), serilingampally, circle-20, slp zone, ghmc.(reserved for scs only)(item-06)

CTN :42681393

05 Dec, 2025 5.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coati

Central Government/Public Sector

CTN :42926344

24 Dec, 2025 NA

Yamunanagar - Haryana

Tender For supply of cast steel side frame along with liners (duly welded). drawing no:- (1) wd - 89067 / s - 3, alt. 19. (2) sk - 69594, alt. 38, item no. 7 ( for liners ). specn. no:- wd-17-casnub-22hs-bogie-92, rev.-4. warranty:- the firm shall stand warranty for a period of 72 months from the date of manufacture or 60 months from the date of fitment/commissioning, whichever is earlier. (for details please see spec. no. wd-17-casnub-22hs-bogie-92, rev.-4)

CTN :42905928

05 Jan, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of cast steel bolster with liner for casnub 22 hs bogies to drg. no. wd-92058-s-3, alt-8 item 1,2 &3. material & specification as per drawing conforming to rdso's spec wd-17-casnub-22hs-bogie -92 (rev.4) of sept-24.

Central Government/Public Sector

CTN :42688661

17 Dec, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of cast steel bolster. drawing no :- wd - 92058 - s / 3, alt. 8, item no. 1 to 3. specn. no:- wd-17-casnub-22hs-bogie-92, rev.-4. warranty :- the firm shall stand warrantee for a period of 72 months from the date of manufacture or 60 months from the date of fitment/commissioning, whichever is earlier. (for details please see spec. no. wd-17-casnub-22hs-bogie-92, rev.-4).

Central Government/Public Sector

CTN :42499857

10 Dec, 2025 NA

Multi City - Multi State

Tender For supply of cast steel bolster with liner for casnub 22 hs bogie to rdso drg. no. wd-92058-s-3, alt. no. 8, item no.1, 2, & 3. other technical requirements conforming to rdso specification no. wd-17-casnub-22-hs bogie -1992, rev.4 of september 2024. [ warranty period: 72 months after the date of delivery ]

Cast Iron Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector