Latest cast iron cover Tenders | Government cast iron cover Tenders

Central Government/Public Sector

CTN :43039170

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast copper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with latest amendment.note- material to be procured from rdso approved sources only rdso item id-3100606)

Central Government/Public Sector

CTN :43039171

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor.note-material to be procure through rdso approved sources only. rdso item id 3100606.

Central Government/Public Sector

CTN :43039172

17 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of jointless grooved hard drawn copper contact wire 107 sq mm made out of continuous cast copper wire rods in non returnable wooden drum length should not be less than 1500mtrs and balanced qty. in one drum. as per rdso spec. no. ti/spc/ohe/cw/0971or latest. make rdso approved vendor. ( material to be procured from rdso approved sources only.)rdso item id 3100606

corporations/Associations/Others

CTN :42988946

06 Dec, 2025 9.87 Lacs

Multi City - Telangana

Tender For providing of chainlink fencing and providing of pre cast covers in various locations of ward no 111(p), serilingampally, circle-20, slp zone, ghmc.(reserved for scs only)(item-06)

CTN :42681393

05 Dec, 2025 5.00 Lacs

Hisar - Haryana

Tender For corrigendum : supply of various tools at govt. iti nalwa - wood work technician, bevel square 150 mm (i) blade material- stainless steel, hardness- 418 hv to 460 hv(ii) stock material cast iron, fully painted(iii) wing nut and bolt material: m.s.(iv) measuring range 0 to180 (v) approx.weight-150gram(vi) operation-for testing any angle, claw hammer 500 gram (i) head made by heat treated steel, hardened upto 46 to 58 hrc with curved claw.(ii) handle 300mmx30mm dia.made by hardwood(rosewood)(iii) operation-for striking and nailing, hand brush for cleaning 450mm (i) bristle material: mexican fibre, sisal fibre, bristle length 70mm, tampico fibre, fixingin hardwood/ plastic(ii) operation-for workbench cleaning, mallet medium size (i) handle size- over all length- 385 mm, toe side- 40mm(w), 25 mm(t), heel side- 30 mm(w), 22 mm(t)(ii) made by hardwood (rosewood)(iii) operation- for striking, carpenter mortise gauge (i) adjustable spur strip 300 x 8 x 8mm 2mm, made by brass(ii) fixed spur strip size 20x8x8mm 1mm(iii) adjustment thumbscrew length15mm 2mm, dia. 15mm 2mm and shank 9mm 2mm, made by brass(iv) brass pull side and thumbscrew to enhance in gauge (v) operation-for marking along and across the grain for double line (mortise) , marking knife (i) overall length tip to handle end 200mm 2mm(ii) blade length 65mm 5, width-25mm 2, thickness- 4mm 1mm(iii) tang length-20mm, thickness 4x4mm square(iv) blade material high carbon steel, marking point sharp and 60 degree angle for accurate marking(v) handle length120mm 5,diameter15mm 2 and gripping point 10mm 2mm(vi) handle made of hardwood (rosewood)(vii) ferrule length15mm, dia.10mm,material m.s.gauge 18swg.(viii) blade hardness-60hrc(ix) operation-for marking, mortise chisel (set of 3 ) (i) overall length 250mm 5mm(ii) mortise blade width 6mm, 10mm, 15mm, thickness 15mm, cutting edge angle30 - 35 ,neck to cutting edge length150mm 4mm, tang length 40mm 2mm, uppersize- 4x4mm, lower 2 x 2mm 1mm(iii) blade length 100mm 3mm each.(iv) handle length120mm 5mm, handledia. 25-30mm 2mm, material hardwood (rosewood)(v) ferrule size length25mm,dia. 20mm,18 swg. material:m.s.(vi) steel hoop dia.-20 ,thickness-5mm 1mm, material:m.s.(vii) blade material, high carbon steel(viii) blade hardness 55 57 hrc(ix) operation-for chiselling, electric heater (i)1000/1500wattelement,standdimensions(lxwxh)-250x250x85mm(ii) madeofironheatingplatesize-200mm,heatingplatematerial-chinnimitti,nichromewirewithsturdytopoperation-for absorbing moisture ofwood, twist drill bits (set of 4 ) 6,8,10,12mm (i) cuttingangle-30 (ii) hardness:760 hrc to 900 hrc(iii) material: high speed steel(iv) operation-for drilling, cabinet scraper (i) dimensions: length-100mm ( 1) width-100mm ( 1) thickness-1mm min.(ii) material: spring steel(iii) wooden handle size-110x30x20mm,material:hardwood(rosewood),fitted with rivet(iv) operation-for scrapping, gauge chisel, scribing (set of 5 ) 6mm,10mm,12mm,16mm,20mm (i) blade material: high carbon steel(ii) cutting angle: 25 5 (iii) blade hardness- 55 to 61 hrc(iv) operation-for scribing , plumber, item name :-"v" block pair 7cm with clamp (i)size: length 7cm, width 45mm, height 45mm.(ii) material: hardened steel or cast iron(iii) v-groove angle: generally 90 degree , item name :-"v" block pair 15cm with clamp (i) sizelength: 15cm. width 75mm, height 75mm(i) material: hardened steel or cast iron(iii) v-groove angle:- generally 90 degree, item name :-bench vice 150mm (i) jaw width - 150mm ,jaw opening capacity: 150-175 mm(ii) jaw depth-70-85mm(iii) material:- cast iron body.(iv) weight: 15 - 20 kg(v) spindle :- mild steel(vi) handle : carbon steel or alloy steel(vii) thread type: acme thread (square thread)(viii diameter: around 20-25mm(ix) length: 250mm to 300 mm, item name :- metal-l 15cm (i)type : metal l square(ii) size : each arm of the l 15cm (150mm) width-20 mm(iii) material : stainless steel or carbon steel(iv) shape : 90 angle between two arms(v) accuracy : 0.01mm (vi)finish : anti rust coati

Central Government/Public Sector

CTN :42926344

24 Dec, 2025 NA

Yamunanagar - Haryana

Tender For supply of cast steel side frame along with liners (duly welded). drawing no:- (1) wd - 89067 / s - 3, alt. 19. (2) sk - 69594, alt. 38, item no. 7 ( for liners ). specn. no:- wd-17-casnub-22hs-bogie-92, rev.-4. warranty:- the firm shall stand warranty for a period of 72 months from the date of manufacture or 60 months from the date of fitment/commissioning, whichever is earlier. (for details please see spec. no. wd-17-casnub-22hs-bogie-92, rev.-4)

CTN :42905928

05 Jan, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of cast steel bolster with liner for casnub 22 hs bogies to drg. no. wd-92058-s-3, alt-8 item 1,2 &3. material & specification as per drawing conforming to rdso's spec wd-17-casnub-22hs-bogie -92 (rev.4) of sept-24.

Central Government/Public Sector

CTN :42850993

11 Dec, 2025 9.99 Lacs

Mumbai - Maharashtra

Tender For repairs replacement to cast iron covers and gratings at inhs asvini

CTN :42685733

03 Dec, 2025 NA

Multi City - Multi State

Tender For supply of cctv systems for various location c c---ip network cctv bullet camera 2mp , ip network dome camera 2mp , nvr 16 channel with 4k support 2hdd , 8port giga poe swith , cat 6 cable sftp 23awg solid 305 m , hdd 10tb , cat 6 patch code , pvc conduit 25 mm , 25 mm hdpe coil 100m , junction box , rj45 connector metal , 3 core 2. 5 mm electrical cable , 6 core single mode armoured opticle fibre cable , sfp module for fibre , commercial tv 43 inch 27x7 , liu rack loaded , 6u outdoor rack waterproof with pdu and fan , 12u rack floor standing with pdu and other accessories , 9u rack indoor with pdu and other accessories , lc to lc patch cord , 63amp mcb with switch and socket for ups , 16 amp to pole mcb , stainless clamp , electric item accessories as per requirement , online ups 1 kva with battery inside , chemical earthing , lighting arrestor with copper wire , galvanized steel pole with anchor base and cement base , digging of hard and soft soil upto 3 feet deep , fiber splicing , laying of cat 6 fibre and electric cable , cast iron ofc cable route marker ) /bid number: gem/2025/b/6739478 * /dated: 10-11-2025 & & / bid document1 / 28

Central Government/Public Sector

CTN :42688661

17 Dec, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of cast steel bolster. drawing no :- wd - 92058 - s / 3, alt. 8, item no. 1 to 3. specn. no:- wd-17-casnub-22hs-bogie-92, rev.-4. warranty :- the firm shall stand warrantee for a period of 72 months from the date of manufacture or 60 months from the date of fitment/commissioning, whichever is earlier. (for details please see spec. no. wd-17-casnub-22hs-bogie-92, rev.-4).

Cast Iron Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector