Latest cast iron fittings Tenders | Government cast iron fittings Tenders

CTN :40620424

26 Jun, 2025 8.76 Lacs

Murshidabad - West Bengal

Tender For procurement of different types of alloy cast iron fittings couplings for overhauling of u3, ahpmm, stg-i sgtpp,wbpdcl.

State Government

CTN :40534123

09 Jun, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For corrigendum : supply of c.i./c.s. casted item - c.i. casted items on new basis, c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) ma

CTN :40556250

14 Jun, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of lv6 mt14 niv 06 2023 tyre tire 26 9 r14 t l dwt moapa , lv6 mt14 2610 001520 tyre pneu 1200x20 18 pr sch , lv7 itr beml 2530 002531 axle vehicular non driving mk ii , lv7 itr beml 2530 002532 wheel hub hub wheel steel casting , lv7 itr beml 2510 000664 ramp loading vehicle loose type , lv7 itr beml 3990 000123 50 85 3 loose ramp assy lot 1 2 , lv7 itr beml 50 225 1 bottom spring seat lot 2 to 4 , lv7 itr beml 29500042 cam shaft lh , lv7 itr beml 5340 014294 50 126 articulation stop primary , lv7 itr beml 2530 002535 29019022 brake dual disc rh , lv7 itr beml 3120 000673 bushing sleeve aluminium bronze , lv7 krz 236 1017010 a fine oil filter , lv7 ld a 9214300 assy of eng complete , lv7 stln 2520720518586 assy of rear axle , lv7 stln 2520 012659 transmission mechanical vehicular , lv7 stln x 7482600 turbocharger 122kw alfa 353deg , lv7 stlnvf b 1211802 radiator cac assy with shroud , lv7 stlnvf b 9290009 s a of fip for 180 hp bs iii eng , lv7 stlnvf 2520 72 0466596 transmission mechanical vehicular , lv7 t 815 ia 01 0068 block cast iron wt 27 kg , lv7 t 815 4730 72 0315037 connector tubing straight 130076631064 , lv7 sca 197811 battery main switch , lv7 sca 1104460 remote control box bid number/ & ( * ) : gem/2025/b/6284380 dated/ + : 31-05-2025 bid document/ 3 3 1 / 29

Central Government/Public Sector

CTN :40581827

13 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of scrapper bracket (hy-251.06) - un m/cd carbon steel casting as per drg. 16117000402/02 with matl as , rough m/cd bowl extn. ring seg. (hy-254. m) - as per drg. hy-254.00m rev-01 with matl. as per specn. a

Central Government/Public Sector

CTN :39711502

06 Jun, 2025 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of steel castings - bearing body thrust c s, mat code-ba9211104610, drg- 16270950851-var 04, spec-aa19511 , flanged dust guard-half secn, mat code-ba9211118034, drg- 36118000558, spec-aa19511 , convr body liner-93, mat code-ba9211133009, drg-26220450065, spec-aa19511 , convr body liner-94, mat code-ba9211133017, drg- 26220450065, spec-aa19511 , convr body liner-95, mat code-ba9211133025, drg-26220450065, spec-aa19511 , axial labyrinth, mat code-ba9211233003, drg- 26270850449, spec-aa19512 , fm bowl center cover, mat code-ba9711342057, drg-26110402250, spec- aa19511 , fm bull ring clamping ring, mat code- ba9716612036, drg-26111003292, spec-aa19511 , brg hsg cover bottom-rm casting, mat code- ba9211106575, drg-26110402893, spec-aa19511 , rm casting for trunnion shaft housing, mat code- ba9211123305, drg-36131004010, spec-aa19511

Central Government/Public Sector

CTN :40289765

04 Jun, 2025 NA

Durg - Chhattisgarh

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; steel melting shop(sms) - steel ladle back up casting, installation and maintenance of backup (safety) lining with castable in steel ladles, transfer ladl..

corporations/Associations/Others

CTN :40579489

16 Jun, 2025 NA

Hyderabad - Telangana

Tender For auction sale of casting scrap,steel scrap,aluminium scrap,used oil 210 ltrs in metal barrel,used oil 210 ltrs in plastic barrel

Central Government/Public Sector

CTN :40575344

09 Jun, 2025 NA

Itarsi - Madhya Pradesh

Tender For supply of mild steel double sheave crane bottom block hook with swivel round eye head hook & bracket arrangements mounted on thrust bearing with mild steel forged sheave gr ay iron casting. axle pin of steel bar, sheave dia 210mm, groove distance 10mm dia, complete set capacity 03 ton with test certificate, as per is 3815:1969 [ warranty period: 30 m onths after the date of delivery ]

CTN :40571766

16 Jun, 2025 37.03 Lacs

Birbhum - West Bengal

Tender For installation of 1 no clustered (5) ldtw (solar)with 150 mm dia g.i. casting pipe, 80 mm dia g.i. blank pipe and 75 mm stainless steel strainer of 30 ha cca (depth of tube well 100 m) at mayureswar mouza, jl no. - 138, plot nos.- 556, 616, 1527, 527