Latest cast iron item Tenders | Government cast iron item Tenders

Central Government/Public Sector

CTN :45723587

07 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned, scrap various types of cast iron items like hearth border piece, wall border piece, gate valves, side casting, plumber block, bridge tubes, pipes, valves, moulding boxes, pot sleepers, bearing boxes, bearing plates, other ci items etc., with or without damaged and broken condition as available in the lot. note : the lot shall be delivered as is where is basis. other items except cast iron items in the lot is not permitted to take while delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. purchaser should arrange all lifting equipment like forklift, poclain, jcb etc., to lift the cast iron items while delivery. delivery unit : in mt

Central Government/Public Sector

CTN :45063579

29 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : supply of item 2 flat plate heater suitable for insertion & heating of cast i ron mould. heater dimension= 5 , item 3 round/cylindrical heater suita ble for insertion & heating of cast iron mould. heater dimen s , item 4 round/cylindrical heater suita ble for insertion & heating of cast iron mould. heater dimen s , item 1 flat plate heater suitable for insertion & heating of cast i ron mould. heater dimension= 5 3

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

corporations/Associations/Others

CTN :45494838

23 Jun, 2026 NA

Bangalore - Karnataka

Tender For auction sale of ss steel items,plastic items,carton boxes,aluminium items,galvanized steel items,cast iron items,condemned beds,display boards scrap,ms and gi scrap

Central Government/Public Sector

CTN :45401027

10 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of others - condemned released unserviceable cast iron items consisting of cylinder liner, cylinder head, turbo casing, piston, moulded brake blocks etc weighing approximately 30 mt. (1) sold on as is where is basis, available under the custody sse/dsl/kjm as declared vide ds-08 no 230627 dt. 18.05.2026. (2) location: bin no.11 at scrap yard dsl shed kjm. (3) delivery to be made on weighment basis only. (4) road approach available. (5) weighing facility is available at 8 km from the site. (6) purchasers should survey the material for road approach, location and quantity before bidding to the lot. after bidding no correspondence will be entertained. (7) segregation is not permitted.

Central Government/Public Sector

CTN :45374545

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, rails used in structures, gipipes, castiron pipes, fabricated structural (ismb, ismc, isa i beams), earthin g plates, engineering items such as bridge side guards, cut mast with / without bricks, cut angles and chanels, angles with rail fittings and attachments used in engineering structures, frame of steel, ms channels, i beams, tees, framework of steel, cut rails, structural steel, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, gi pipes, ci pipes, cast iron items, water channel sheets, support structures and fabricated rails with or without brick/concrete, minor nonferrous wire attachments, rails used for structural support, fob materials, cut parts of girders,fob electrical channels, ladders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. note: (1) cutting permission is granted to heavy nature items to lorry loadable sizes only. (2) loading by crane is also permitted. (3) if any non-ferrous materials found should be handed over to custodian. location: b row bin 16

Central Government/Public Sector

CTN :44632869

30 May, 2026 NA

Hyderabad - Telangana

Tender For bid to ras bid to ras supply of cast iron mould 480 dia mould

Central Government/Public Sector

CTN :45145874

19 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous cast iron consisting of pully brake block, brake disk, cylender head & linner,cst-9 sleeper with or w/o tie bar, sluice valve, gate valve, tee, sistern, benches, weigheing m/c parts, plateform, pipe, socket, elbo, pump-part, sig. pedastal, brake pad, fly wheel, damage-machine, c.i. band, tappet, billet, cut of angle -cock, flange, dirt collector, ballencing weight,tub, blower, switch board, machine brake disc & other cast iron items released from loco, carriage, sig, trd, tmc, p.way, electric,etc of short & sizes with ferrous steel and - n.f. attachment if any. note :- 1.loading by purchaser. 2. delivery not allowed against part payment. 3. hammering allowed at the time delivery. 4. cutting not allowed. location: lying in bin no.-a-10