Latest cast iron spares Tenders | Government cast iron spares Tenders

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Central Government/Public Sector

CTN :40107459

19 May, 2025 NA

Bikaner - Rajasthan

Tender For supply of cast steel bolster complete to rdso drg no wd-04017-s-03 alt 2, item no 1 duly welded with item 2 and 3 confirming to rdso specification wd-34 casnub 22 hs ( mod 1) - 2004, amndt.5. ]

State Government

CTN :40095136

26 Apr, 2025 9.50 Lacs

Rajsamand - Rajasthan

Tender For surgical and other items--, , , , absorable gelatine spounge ( pkts), , absorbent cotton 1 kg/roll, , absorbent cotton 500 gm/roll, , abdominal drain kit 32 & 28, , adapter 3 way per no., , adheseve plaster 10 cm x 5 mtr, , adheseve plaster 2.5 cm x 5 mtr, , adheseve plaster 5 cm x 5 mtr, , adheseve plaster 7.5 cm x 5 mtr, , arm's ceeling pouch (all size), , arterio venous blood tubing (make: nipro ), , aterio venous fistula needles 16g (make: nipro ), , ankle blinder, , bk traction kit, , b. p. blade (all size), , baby kit (with 7 item), , b.k. skin traction, , blood administration set, , clavicle brace (all size), , cervical colour belt (all size), , cathether mount, , closed suction system, , chest lead, , cord clamp, , crepe bandage 3", , crepe bandage 4", , crepe bandage 6", , central venous catheter, , crescent knife iw 1153(opthalmic), , i will put a catheter, , key belt, , cervial coller, , chest dranage bag., , chest tube cathether, , dark black gaggles, , delivery kit (with 5 item ), , dyper for new born, , dispo needle 16 no., , dispo needle 20 no., , dispo needle 26 0.5, , dispo syringe 20 cc, , dispo syringe 50 ml, , disposable insulin syringe graduation upto 100 units with fixed 28 g needle, , disposable needle 24 no., , disposable needles 18g, , disposable needles 23g, , disposable needles no.21, , disposable needles no.22, , disposable sterile gloves size 6.5 ", , disposable sterile gloves size 7 inches, , disposable sterile gloves size 7.5 ", , disposable syringes with needle - cgs 10cc, , disposable syringes with needle - cgs 2cc, , disposable syringes with needle - cgs 5cc, , dispossable 3 layer mask, , elastic adhesive bandage 4", , endo tracheal tube no. 2.0 -5.5 cuffed, , endo tracheal tube no. 6.0 9.0 cuffed, , endo tracheal tube no. 2 to 9 plane, , enema (saline + glycerine) (proctoclysis enema sodium phosphet enema), , finger splient, , fiba cast 6", , 4" cast fiber, , foley's urinary catheter size 16/14/12/10, , foley's urinary catheter size 18, , 3 way cathether 22/24 no., , gauge than, , g-dress 30 cm, , g-dress 25 cm, , g-dress 20 cm, , g-dress 15 cm, , g-dress 10 cm, , g-dress 5 cm, , hme filter, , high flow mask, , inter coster dranage tube (flex cath.) all size, , id tag for new born, , id tag for adult, , i.v.infusion set, , infant feeding tube all size, , intravenous set (adult) with airway and needle, , iv cannula (two way) size 20to22, , iv cannula (two way) size 24, , iv cannula 18 no., , keratone kinfe iw 116 12.8 mm, , knee brecce all size, , knee cap all size, , knee brecce hingd, , knee support, , knife blade no 11, , knee cap all size, , micro i.v. set, , micropore 1", , micropore 1/2", , micropore 2", , micropore 3", , microscope bulb, , mucus extractor, , mucus sucker, , n-95 mask, , nabuliser mask, , niv mask, , ls belt, , oxygen mask adult, , oxygen mask pediatric, , pedia dripset, , plaster of paris bandages bp 15cm x 2.7mts / roll, , plaster of paris bandages bp10cm x 2.7mts / roll, , pmo line, , povidion 7.5% scrub 100 ml, , pouch aray silling, , romo drain under water seal, , romovac set (close wound sucction set) all size, , rope belt, , pure cell rc single filter for thelisimia patient, , rebelt all size, , ryle's tube (p.v.c.) size: children: 10 & 12, , ryle's tube (p.v.c.), size: adult: 16/18/14, , s.v. set all size, , sanitary napkin, , skin grafting blade, , soft cast 4", , soft cast 6", , spinal needle (b.d.) 23 to 26, , spinal needle (b.d.) 27, , suction tube, , surgical blade size 15 in ( pkt of 100 ), , surgical blade size 22, , syring 50ml, , tennis elbow support, , 4" tourniquet, , 6" tourniquet, , taylor brace, , trachostomy tube all size (without cuffed), , trachostomy tube all size cuffed, , t-tube, , tylor brace, , thumb spica, , urethral catheter (k-90), , urinary drainage bag, , yonker suction cannula, , ventilater circuit, , 3 way foly cathether all type, , under water seal dranage bag., , wrist binder, , plastic urinal for male wrist binder, , suture

Central Government/Public Sector

CTN :40094649

02 Jun, 2025 NA

Mysore - Karnataka

Tender For supply of brake block hanger bracket on head stock (single piece cast steel design) drawing no: - icf/sk-0-3-210 alt. (g) & (2), item-1. [ warranty period: 30 months after the date of delivery ]

CTN :40065856

09 May, 2025 NA

Hooghly - West Bengal

Tender For supply of r polypropylene random copolymer pipes 32 mm outer dia isi marked pn 16 sdr 7.4 uv stabilised and anti microbial fusion , all as per item no 20.00 here in before but of size 25 mm bore. , supply and fixing sluice valve flanged type 80 mm bore isi marked as per is 14846 2000 with valid cmlno. batch no. and manufacturer serial no. class pn 1.6 with brass spindle , all as per item no 22.00 here in before but of size 100 mm bore of pipe . , all as per item no 22.00 here in before but of size 150 mm bore of pipe . , all as per item no 22.00 here in before but of size 200 mm bore of pipe . , material and labour for ductile iron fittings for spigot socket ductile iron pipes such as bends any type radius and angle taper any type , supply and fixing cast iron air released valve with two air outlet is 14845 2000 dk fig 4 and fixing up in water main of 150 mm , construction of brick masonry valve pit of size 0.9m x 0.9m x 0.9m depth internal dimension , construction of brick masonry valve pit of size 1.20m x 1.20m x 0.9m depth internal dimension , m l for cement concrete 1 4 8 type d 2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition complete all as specified , m l for cement concrete 1 2 4 type b 0 using 12.5mm graded crushed stone aggregate as in coping of brick masonary including , m l for brick work with flyash bricks old size straight or curved on plan to any radius exc 6m , m l for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar 1 4 complete all as specified and directed. , supply and fixing of gm globe gate valve suitable for 50 mm bore pipe with iron wheel head screwed both ends for iron ppr pipes isi marked , all as per item no 33.00 here in before but suitable for 40 mm bore pipe. , all as per item no 33.00 here in before but suitable for 25 mm bore pipe. , all as per item no 33.00 here in before but suitable for 20 mm bore pipe. , s f for straight plain brass ferrules or connecting screws screwed bolt ends of 20 mm bore pipe complete all as directed , all as per item no 37.00 here in before but of sizer 25 mm bore , returning filling in including spreading leveling watering well ramming in layers n. exc 25 cm thick complete all as directed. , removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. , wrecking crow bar or claw bar as per is 706 (q3)

Corporations/Associations/Others

CTN :39998483

22 Apr, 2025 17.35 Lacs

Beed - Maharashtra

Tender For corrigendum : e tender 09 - excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. item no. 2.18, providing and laying in situ / ready mix cement concrete of m-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with scada with fine agreegates of required specifications (natural sand / vsi sand finely washed etc ) item no.11.02, providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, processor etc. complete. with natural sand/v.s.i. quality artificial sand . item no. 25.11, providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. required complete. item no. 26.33, conveying excavated material upto a lead of 2 km away from site including, conveying,stacking,spreading as directed by engineer in charge.as per ssr21-22 statement c1, supplying hard murum/ kankar at the road site, including conveying and stacking complete. item no. 2.29a, spreading hard / soft murum for side width etc. complete. item no. 2.30 page no. 15, compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.item no. 2.31 page no. 15, spreading 80/40 mm metal for road work including sectionong etc complete as directed by engineer in charge . item no. 50.58, compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with power roller having weight 8 to 10 mt. including necessary, labour, materials and artificial watering complete. item no. 50.59, providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand sr no 816item no 24.01, providing and laying in situ / ready mix m20 cc of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based plc with scada enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (natural sand / vsi sand finely washed etc ) item no 471 sr no 14.39, royalty charges for sand, royalty charges for metal, royalty charges for murum, sieve analysis, compressive strength of c.c.cube (set of 3 cubes)

Co-operative

CTN :40022918

21 Apr, 2025 3.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of cost iron items for season 2025-26 - a. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc with new casting, b. supply of cast iron scrapper, magma rotor, magma peddle and coupling etc on conversion basis., c. machining charges (if required), supply of boiler material on conversion basis composition is210 grade 25cr, 1.2 suitable to with stands 1000 degree c. temp., a. ci furnace grate bar, b. ci furnace grate bar jally, c. ci furnace grate bar holder, d. ci furnace nozzle, e.ci mouth piece, f. ci bag furnace chute, g. ci hanger, supply of ci v grove pully with new casting, supply of ci v grove pully on conversion basis., supply of ci bearing housing for magma mixer with new casting, supply of ci bearing housing for magma mixer on conversion basis, supply of ci duck foot bend upto size 12" on conversion basis, ms scrapper for under feed roller material is2060 (sail) pitch 70mm as per drg no. 10/6/04m grooving details as per drg no. 8/9/19, cast steel worm for crystallizer as per drg no. 90/08/17, cast steel gear 48 teeth for magma mixer as per drg no. 2k1/10/90, cast steel pinion 19 teeth as per drg no. 15/7/86b, cast steel pinion 19 teeth as per drg no. 15/7/86c, cast steel helical pinion 12 teeth as per drg material en-8, en-8 spidle with gear for super heater drain valve teeth 10 as per drg, ms fins for steam seprator for boiler furnace, cast steel sporket for mud mixture as per drg no. 05/06/09, ms sprocket as per drg no. 16/8/06d item no. a (95 teeth), ms sporcket as per drg no. 16/8/06d item no. b, cast irom worm wheel for 60 ton crystillizer od 1362mm x bore 150.6 mm x no. of teeth 72 as per drg. no. 17/8/13c, ci pulleysize od 380 mmwidth 70 mm03 nos. v groove as per drg. n o. 06/7/0r(drawing enclosed), ci pulleysize od 602 mmwidth 112 mm04 nos. v groove as per drg. n o. 07/8/07(drawing enclosed), cast steel worm for 60 ton crystallizer od 220mm as per drg no. 17/8/13c (b), hanger with nut for super heater coil of new boiler cap. 40 ton/hr pr. 45 kg./cm2 material ss-316l, cast steel driving sprocket 17 no. teeth 76.2mm pitch as per drg. no. 17/05/3m item no. 02, cast iron pulley for c-1 c/f machine od 260 dia , 08 no. v groove, b section belt as per drg. no. 19/08/14 c/f , dynamically balanced, c. i clamp for boiler no. 01 & 02 as per drg. no. r/89/07/36/90, c. i clamp for beam of boiler no. 01 & 02 (complete set with bolt & nut), (a) as per drg. no. 89/07/35a ( 01 of 02), (b) as per drg. no. 89/07/35a ( 02 of 02), c.i supporting hanger for furnace beam of boiler no. 01 as per drg., c.i furnace hanger of back side beam for boiler no. 01& 02 as per drg., c.i plate for boiler no. 03 as per drg. no. 18/92/7/rev., c.i supporting clit for furnace as per drg. l-30 nos., r-30 nos., c.i supporting plate of furnace beam for boiler no. 04 as per drg., c.i grade bar (stocker) for boiler no. 03 as per drg. no. 91/01/01 suitable for 600 degree c. temp., c.i supporting plate for window near supper heater coil of boiler no. 03 size length - 760mm x width 500 mm x thick 25 mm, c.i tunion bar for new boiler as per drg. no. 2k1/09/83, c.i attachment of tunion of boiler no. 4& 5 as per drg. , cost steel worm no. of teeth 04, pitch 64, bore 80mm, od 220 dia, width 250mm as per drg. no. 90/08/17, supply of cast steel tape wedge block for mill as per mill drawing suitable for 5000 tcd plant, burning loss @ % on conversion basis item only

CTN :40022677

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of gun metal bearing and c.i. casting item on conversion basis year 2025-26 - gun metal bearing of different size as per mill drawing on conversion basis. with machining charges, machining of above casting g.m. bearing, c.i. solid/hollow rod, coupling, pulley & drums etc. machining of different size on conversion basis. with rough, c.i. solid/hollow rod, coupling, pulley & drums etc. machining of different size on conversion basis. final machining, c.i. casting for boiler accessories with required 0.5% nickel & chromium 1% with machining with sand ballast on conversion basis, supply of new c.i. covers for electric motor with machining, gun metal bearings of different sizes as per drawings new , gun metal casting of different sizes, solids/hollow, new, duly machined, conversion basis, burning loss, gun metal, cast iron

CTN :40021395

23 Apr, 2025 5.00 Crore

Thane - Maharashtra

Tender For appointment of contractors who participated in the tender for installation of open gym and play equipment in the garden in mira bhainder municipal corporation area under basic amenities on the panel (rate contract). (basic amenities fund) - part (a) play equipment, item no. 1providing & fixing deluxe slide 1.5 mtr( rate approved by garden dpt ), item no. 2providing & fixing deluxe slide 2.1 mtr( rate approved by garden dpt ), item no. 3providing & fixing double arc swing( rate approved by garden dpt ), item no. 4providing & fixing a to b scrambler( rate approved by garden dpt ), item no. 5providing & fixing multi seater see-saw( rate approved by garden dpt ), item no. 6providing & fixing satellite scrambler( rate approved by garden dpt ), item no. 7providing & fixing criss cross scrambler( rate approved by garden dpt ), item no. 8providing & fixing s bridge ladder scrambler( rate approved by garden dpt ), item no. 9providing & fixing maps 6( rate approved by garden dpt ), item no. 10providing & fixing podium bench( rate approved by garden dpt ), item no. 11providing & fixing )loop rung( rate approved by garden dpt, item no. 12providing & fixing hexa climber( rate approved by garden dpt ), part (b) outdoor fitness equipment, item no. 13providing & fixing aero rider ( rate approved by garden dpt ), item no. 14providing & fixing leg lift post( rate approved by garden dpt ), item no. 15providing & fixing abs board single( rate approved by garden dpt ), item no. 16providing & fixing chest & shoulder combination( rate approved by garden dpt ), item no. 17providing & fixing pull up station( rate approved by garden dpt ), item no. 18providing & fixing uneven bar( rate approved by garden dpt ), item no. 19providing & fixing forearm twirl( rate approved by garden dpt ), item no. 20providing & fixing sky walker double( rate approved by garden dpt ), item no. 21providing & fixing sky 3 in 1 ( aerial stroller + leg press + shoulder twirl)( rate approved by garden dpt ), item no. 22providing & fixing back extention( rate approved by garden dpt ), item no. 23providing & fixing standing seating twister( rate approved by garden dpt ), item no. 24providing & fixing single bar( rate approved by garden dpt ), item no. 25providing & fixing leg stretch( rate approved by garden dpt ), artificial grass without pcc 4 tone pe (crown shape) + pp curl 35 mm + 1 mm 3/816 stitches / 10 cm + 3% 7600 detexdensity: 16800 per sqmbacking: pp cloth + mesh + sbr latex, providing and laying cast in situ/ready mix cement concrete in m20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.), with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) (pwd ssr 24.10)

Central Government And Public Sector

CTN :40041493

02 May, 2025 NA

Bangalore - Karnataka

Tender For butterfly valve 300mm size, gear operated, pn16 rating, body of cast iron, seat black nitrile rubber in-situ moulded on the body, disc sg iron-nylon coated, shaft stainless steel, fitted with gear unit valve along with operating wheel, maximum pressure-16 kg to is: 13095 specifications of make l & t or substantially equivalent. note: item should be supplied along with manufacturer test certificate. warranty: 18 months from the supply. [ warranty period: 18 months after the date of delivery ]

Cast Iron Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Central Government/Public Sector

State Government

Central Government/Public Sector

Corporations/Associations/Others

Co-operative

Central Government And Public Sector