Latest casting item scrap Tenders | Government casting item scrap Tenders

State Government

CTN :40505230

16 Jun, 2025 10.76 Lacs

Haveri - Karnataka

Tender For corrigendum : providing qc necessary equipments for qulity control labs in qc charges of work construction of kittur rani chennamma residential school at akkur village sno 98 guttala hobli in haveri taluka,haveri district - item code: sl no 1 (data rate), item description: electronic weighing, balance with battery backup of capacity 30, kg accuracy - 5 gm ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 3 (data rate), item description: electronic weighing, balance with battery backup of capacity 1kg, and accuracy-1mg ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 5 (data rate), item description: stainless steel depth, guage-150mm long ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 6 (data rate), item description: slump cone complete with, base plate and graduated tamping rod. ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 9 (data rate), item description: core cutter, dolly and, rammer of 9.5 kg one set ---- in addition to, the conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 10 (data rate), item description: rapid moisture meter, apparatus with calcium carbide powder box, 1no packed in wooden box with calibration, report ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 11 (data rate), item description: bitumen extractor hand, operated with handle ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 12 (data rate), item description: filter paper ( bundle of, 100 pieces) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 13 (data rate), item description: benzene ---- in addition, to the conditions displayed in the kppp, portal, separate general conditions sheet, uploaded and should be considered, item code: sl no 14 (data rate), item description: bosch digital camber, board range120 cm (bosch dnm120i digital, inclinometers) ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 15 (data rate), item description: digital temperature meter, / thermometer with sensor (o c to 300 c), with accuracy of +/-0.1 degree centigrade ----, in addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 17 (data rate), item description: cast iron concrete cube, mould 15x15x15cm as per isi standard (set, of 3 cubes) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 18 (data rate), item description: cast iron concrete beam, mould for flexural test 150x150x700 mm as, per isi standard ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 19 (data rate), item description: iron tray 10x12" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 20 (data rate), item description: iron tray 12x18" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 21 (data rate), item descript

Central Government And Public Sector

CTN :40700383

04 Jul, 2025 NA

Raipur - Chhattisgarh

Tender For supply of cast steel bolster complete to rdso drg no.wd-04017-s-03-alt.2, item no.1 to 3 and other technical requirements confirming to rdso specification wd-34 casnub 22h s (mod-1)-2004 read with all amdts, lastest amend no.5 of nov, 2020. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40700796

23 Jun, 2025 NA

Raipur - Chhattisgarh

Tender For supply of cast steel bolster complete to rdso drg no.wd-04017-s-03-alt.2, item no.1 to 3 and other technical requirements confirming to rdso specification wd-34 casnub 22h s (mod-1)-2004 read with all amdts, lastest amend no.5 of nov, 2020. [ warranty period: 30 months after the date of delivery ]

CTN :40699005

28 Aug, 2025 NA

Jamshedpur - Jharkhand

Tender For supply of cast steel bolster with liner for casnub 22 hs bogie to rdsos drg.no.wd-92058-s-3, alt. no.7,item no.1,2, & 3 & other technical requirement conforming to specification wd-17-casnub-22-hs bogie -1992,rev.3, read with all amnd. latest amnd.5 of sept.- 2016 [ warranty period: 30 months af ter the date of delivery ]

Central Government / Public Sector

CTN :40682309

14 Jul, 2025 NA

Bhubaneswar - Odisha

Tender For manufacture and supply of 1 in 16 cms crossing bg (1673mm) for 60kg(uic)/60e1 on psc sleepers conforming to rdso drg. no. t-5693, alt.3 complete with fittings as listed in the drawin g excluding grooved rubber sole plates, check rails, insulating liners, fish plates, fish bolts with nu ts, elastic rail clips etc. specification: as per irs specification for cast manganese steel (cms) crossi ngs and weldable cast manganese steel (wcms) crossings, serial no. irs: t-29 (revised 2024). this is a safety item. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40659551

23 Jun, 2025 NA

Kota - Rajasthan

Tender For supply of joint less hard drawn grooved copper contact wire 107 sq.mm made out of continuous cast c opper wire rods in non returnable wooden drum, as per rdso specification no. ti/spc/ohe/cw/0971 with l atest amendment. (item reserved for rdso approved source with item id: 3100606) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40460766

02 Jul, 2025 NA

Kota - Rajasthan

Tender For supply of casnub - 22hs cast steel bogies with friction damping arrangement for b.g. box nhl wagon as per rdso's drg. no. wd-05086-s-01, alt-28 and wd-04078-s/1, alt no - 4, item sl. no . 1 to 18 (except item sl. no. 4,5,6,7,8,9,11,12,13,14 & 15). as per rdso's spec. no. wd-17- casnub- 22 hs bogie- 92 (rev.-4) of sept. 2024. [ warranty period: 72 months after the date of delivery ]

Central Government/Public Sector

CTN :40658655

24 Jul, 2025 NA

Kota - Rajasthan

Tender For supply of cast steel side frame with liner (duly welded) for blc wagon drawing no. (1) contr-9404- s/3, alt-7 (for cast steel side frame) (2) contr-9404-s/4, alt-13 item no. 6 (for side frame friction liner) (3 ) sk-69597, alt-43, item no. 9 (for brake wear plate) and spec. no. contrlccf-20 (c), rev-2 with amend . no. 2 of sept.2016. [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :40640734

18 Jun, 2025 NA

Karnal - Haryana

Tender For casting items & trash plate > - casting items & trash plate, cast steel trash plate mill no. 1 drg. no. ss0124-05252501-011-0004 material:- is: 1030 gr- 280/520w, cast steel trash plate mill no. 02 drg. no. ss0124-05252501-011-0005 material:- is: 1030 gr-280/520w, cast steel trash plate mill no. 03 drg. no. ss0124-05252501-011-0006 material:- is:1030 gr. 280/520w, cast steel trash plate mill no. 04 drg. no.ss0124-05252501-011-0007 material:- is:1030 gr. 280/520w, top half to top roller bearing liner drg. no. ss 0124-05251501-011-0027 qty-01 no., feed/discharge roller bearing liner material leaded bronze (bs en 1982, 2008 gr cc495 k, table 28) qty- 2 drg no. ss0124-5251501-011-0034, bush for fibrizer hammer item code mlett 109 material phosphorus bronze bsen 1982:2008, size od 80mm, id 70mm, 56 mm width qty- 128 nos as per drg. no. ss0124-05152001-011-0005 (approx. weight- 172 kg), fibrizer hammer material grade e250a, is2062-2011 made from 56 mm plate with g.m bush fitted & duly hard faced finish wt. 225 kgs as per drg no. ss0124-05152001-011-005, cast steel scrapper mill no. 1&2 top material:- is:1030 gr, 280/520w, drg. no. ss0124-05250532-011-0054, cast steel scrapper mill no. 3&4 top material:- is:1030 gr 280/520 w, drg. no.:-ss0124-05250532-011-0055, cast steel scrapper mill no. 1, bottom material:- is:1030 gr 280/520w, drg. no.:-ss0124-05250532-011-0060, cast steel scrapper mill no. 2, bottom material:- is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0061, cast steel scraper mill no.3, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0062, cast steel scraper mill no.4, bottom material:-is:1030 gr280/520w, drg.no.:-ss0124-05250532-011-0064

CTN :40611207

26 Jun, 2025 NA

Pune - Maharashtra

Tender For supply of re 19 dglp d d - surgical scrub iodine based povidine iodine as per specification , surface disinfectant wipes for digital screens non alcoholic as per specification , inj sugmmadex 2ml vial , super absorbent ot table sheet xl 100 x 225 cms as per specification , lithotomy drape disposable bis cert level 4 , casp item agent sterilant for casp 80 , tyvek roll for 20 cm x 70 mtr with plasms as per specification , tyvek roll for 30 cm x 70 mtr with plasms as per specification , sterile gloves size 6.0 latex power free gamma sterilized as per specification , sterile gloves size 6.5 latex power free gamma sterilized as per specification , autoclave wrapping paper of sms with 100 percent polypropylen as per specification , disposable absorbant pad with poly backing as per specification , cotton cast padding orthoroll 10 cm x 3 metres as per specification , cotton cast padding orthoroll 15 cm x 3 metres as per specification , sterile gloves size 7.5 latex powder free gamma sterilzed as per specification , sterile gloves size 7.0 latex power free gamma sterilized as per specification , soft cotton roll cast padding sterile as per specification , disposable laparascopic babcock hand instrument 36 cm length as per specification , tracheotomy tube polyvinyl chloride with inflatable cuff as per specification , canister 500 ml with tubing with super absorbent sap of 8 mg as per specification , cardiac multimarker panel for quantitative estimation of troponin as per specification + /bid number : gem/2025/b/6277661 , /dated: 05-06-2025 ( ( / bid document 1 / 23

Casting Item Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors