Latest casting item Tenders | Government casting item Tenders

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

Central Government/Public Sector

CTN :45665384

14 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of union malleable cast iron for tube of nominal bore size 25mm is 1879/87 type vii with pressure test as per bs 1256. [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45653540

29 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of servicable cassing tyre 295*80r "as it is where it is condition",scrap buff tyre 1000 x 20 "as it is where it is condition",scrap rubber dust,scrap batteries 12 volt small size,scrap batteries 12 volt big size ( plastic ),used empty engine oil barrels,used empty barrels of grease 180/182 kg. capacity,scrap seatframe m.s. with raxine and plywood bottom,scrap m.s. ( m.s.sheet cutting / m.s.boxes / trunk etc.),scrap tyre 1000 x 20 radial,scrap buff tyre 225/235*75 "as it is where it is condition",brunt / used engine oil in barrels of 205/210 ltr's.,scrap cast iron,scrap forging item

corporations/Associations/Others

CTN :45653543

29 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap seatframe m.s. with raxine and plywood bottom,scrap m.s. ( m.s.sheet cutting / m.s.boxes / trunk etc.),scrap iron,scrap auto parts,scrap wheel disc (all size for heavy bus),scrap wheel disc mini bus,scrap fuel tank ( small ),scrap bearing assorted,scrap radiator assy.having alluminium core without top & bottom,scrap inter cooler,scrap tubeless mini tyre 225/235*75 r,scrap alu. sheet pcs./cutting trays bus body alloys etc. ( old ),scrap cast iron,scrap forging item,scrap spring steel flate ( below 1 feet ),scrap engg. cylinder head,scrap engg. cranck shaft tata,scrap fuel tank ( big ),scrap air tank ( small ),scrap allu. auto parts,scrap tubeless tyre 295/80 r

Central Government/Public Sector

CTN :45646693

13 Jul, 2026 41.00 Lacs

Bhuj - Gujarat

Tender For certain repairs to water supply distribution lines and other connected items at zone c at mil stn bhuj and gandhidham under ge(a) bhuj - taking up u/s ac/gi/di/upvc water main (incl all fitting) with spigot & socket /ms pipe or any other type of pipe or lead joint incl burning out joint & recovering lead from pipe of 200 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as specified and directed., all as per item 1 above but 150 mm dia bore complete all as specified and directed., all as per item 1 above but 100 mm dia bore complete all as specified and directed., all as per item 1 above but 80 mm dia bore complete all as specified and directed., all as per item 1 above but 50 mm dia bore complete all as specified and directed., material and labour di pipes of size 200 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed., material and labour di pipes of size 150 mm bore with spigot and socket end centrifugally cast class "k- 7" , in any length laid in trenches/on surface/ over masonary pillar and connection to old or new position complete all as specified and directed. note: di fitting /lead joint / tyton joint will be measured and paid seperately all the dismanted / demolished /taking down material shall be reused or removed from site., all as per item 7 above but 100 mm dia bore complete all as specified and directed., supply and fixing in any length upvc pipe 150 mm dia pipe manufactured as per astm-d-1785 as per is-559, schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed., all as per item 9 above but 100 mm dia bore complete all as specified and directed., all as per item 9 above but 80 mm dia bore complete all as specified and directed., all as per item 9 above but 50 mm dia bore complete all as specified and directed., m&l di bend any type radius and angle tapers any type straght bend increacing decreacing or double socket etc) tee pipe single branch y juction double branch cross(all socket and spiogat collars caps and plug for the pipe socket & spiogat of pipe size upto 200 mm dia complete all as specified and directed. ( lead /gasket for fitting shall be measured and paid separately), s & f in repair upvc ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., s & f in repair upvc ball valves with operating handle (stop valve) of size 80 mm dia complete suitable for fittings with astm - 1785, schedule 40 upvc pipes complete all as specified and directed., excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed., rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed., removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed., hard standing cutting/road cutting for laying of pipe and making surface good with pcc 1:3:6 complete all as specified and directed., taking down carefully cast iron sluice valve of size 80 mm to 200 mm bore from ci water mains, complete with all acessories complete all as specified and directed., s&f in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type stainless steel spindle with nut, long body, class p n 1.6, conforing to is 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers complete including pumping out accumulated water

CTN :45651662

02 Jul, 2026 3.81 Lacs

Payyanur - Kerala

Tender For amrut 2.0 tranche iii-development of childrens park - supply and installation of play and gym equipments - detailed specification, garden bench- supply, installation and fixing of heavy duty outdoor garden bench (3 seater, 1.50 m length) with cast iron designed side frames, fabricated using high-strength cast iron end supports with decorative and corrosion-resistant finish, and seating arrangement consisting of 1.50 m long ergonomically designed seat and backrest made of treated hardwood/hdpe/uv-resistant recycled plastic slats of suitable thickness, fixed securely to the cast iron frames using galvanized or stainless steel fasteners. the cast iron frames shall be properly finished, free from sharp edges, and coated with rust-proof primer followed by outdoor-grade epoxy/pu paint or powder coating for enhanced durability under outdoor conditions. the bench shall be designed for heavy-duty public use with stable anti-tip structure and provision for firm anchoring to the rcc foundation/pedestal using suitable foundation bolts or embedded fixing arrangement as per manufacturer s specification. the rate shall include all materials, labour, transportation, loading, unloading, erection, fixing, anchoring, testing and commissioning complete in all respects. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed as directed by the engineer-in- charge, suitable for parks, open gyms and public garden spaces (excluding cost of concrte foundation), kids slider - supply, installation, testing and commissioning of outdoor children s play equipment frp & gi pipe combo double slide with frp roof, suitable for children up to 12 years of age, comprising a dual slide structure with two slides oriented in different directions, fabricated using isi-marked gi pipes conforming to is 1239 for main support frame with minimum 100 mm od and 3.0 mm thickness, and intermediate members of suitable diameter with minimum 2.5 3.0 mm thickness. the sliding surfaces shall be made of high-quality uv-resistant moulded frp with smooth finish and rounded edges for safe play, and provided with a durable frp roof canopy for protection from sun and rain. the structure shall include anti-skid climbing steps made of frp/hdpe or textured ms/steel treads, ergonomic handrails with uv-resistant coatings, and all welded joints shall be smoothly finished and free from sharp edges or projections. the entire assembly shall be treated with rust-proof pre-treatment, epoxy primer and outdoor-grade polyester powder coating of minimum 80 microns thickness for enhanced durability. the equipment shall be designed for safe use by children up to 12 years of age and installed on rcc m20/m25 concrete foundation blocks as per manufacturer s recommendation, using stainless steel or galvanized fasteners with proper anchoring. the rate shall include all materials, labour, transportation, unloading, erection, fixing, anchoring, testing, commissioning and all incidental works required for complete installation. the item shall carry a minimum warranty of 2 years against manufacturing defects and shall be supplied and installed complete as directed by the engineer-in-charge(excluding cost of concrte foundation), swing set- supply, installation, testing and commissioning of outdoor gi a-frame double swing set (two-seater) with chain suspension system, suitable for children up to 12 years of age, fabricated using isi-marked gi pipes conforming to is 1239 for the main a-frame structure with minimum 100 mm od and 3.0 mm thickness, and other supporting members of suitable diameter with minimum 2.5 3.0 mm thickness. the a-frame shall be designed for high stability and structural safety with properly braced side members and cross members, and provided with two child-safe swing seats made of hdpe/lldpe or frp with anti-skid surface and rounded edges for safety. the seats shall be suspended using heavy-duty galvanized steel chains of adequat

CTN :45667553

08 Jul, 2026 NA

Mau - Uttar Pradesh

Tender For providing of custom bid for services - c i gun metal casting items

Central Government/Public Sector

CTN :45363602

26 Jun, 2026 42.00 Lacs

Vellore - Tamil Nadu

Tender For corrigendum : repair replacement of internal wiring point wiring and sub main wiring including connected items at zone b otm and md accn at ins rajali under ge m arakkonam - taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed., material and labour point wiring with 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- make of cable : plaza/polycab/finolex/ havells, one light/ fan/ exhaust fan/ buzzer point controlled by one switch., one 3 pin socket outlet 6 amps, independent board with cables 1.5 sqmm size., one 3 pin socket outlet 6 amps,same board with cables 1.5 sqmm size., one light point controlled by two 2- way switches, with cable 1.5 sqmm size., all as per item ser no-2 above here in before but one 3 pin socket outlet 6/16 amps, indipendent board with cables 4.0 sqmm size.make :- polycab/finolex/plaza/havells, material and labour point wiring with 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor drawn into pvc conduit and casing & caping fixed on wall/roof/ceiling including wall cutting etc of size not less than 20 mm dia including provision of 1.5 sqmm single core pvc insulated frls unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- make for pvc casing & caping: sudhakar / avon plast /plaza , make for copper cable: finolex/polycab / plaza., one light point controlled by one switch., one 3 pin socket outlet 6 amps, indipendent board with cables 1.5 sqmm size., all as per item ser no-4 above here in before but one 3 pin socket outlet 6/16 amps, indipendent board with cables 4.0 sqmm size. make :- polycab/finolex/plaza, m&l for sub main wiring for phase and neutral with pvc frls insulated unsheathed multi stranded along with earth wire frls pvc insulted copper conductor, single core cable in and including surface/concealed /pvc conduit appropriate size including cutting chases on brick walls concrete if required/ necessary surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishesas specified for the following sizes. make for copper cables: finolex/polycab / plaza/ havells. make of pvc conduit: sudhakar/finolex/avon plast., 2x 1.5 sqmm and 1x 1.5 sqmm as earth wire, 2x 4.0 sqmm and 1x 4.0 sqmm as earth wire, 2x 6.0 sqmm and 1x 6.0 sqmm as earth wire, 2x 10.0 sqmm and 1x 10.0 sqmm as earth wire, 4x 10.0 sqmm and 2x 10.0 sqmm as earth wire, 4x 16.0 sqmm and 2x 16.0 sqmm as earth wire, taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed., supply and fixing in repair of gi metal flush box suitable for mounting moduler plate of following modules:-, 1 or 2 module, 3 module, 4 module, 6 module, 8 module, 12 module, supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for followin

CTN :45432841

23 Jun, 2026 NA

Azamgarh - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - conversion new supply of c s casting items

corporations/Associations/Others

CTN :45582769

19 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For auction sale of scrap tyre 900 x 20,scrap tyre 900 x 20 radial,scrap tyre 1000 x 20 radial,servicable cassing tyre 295*80r "as it is where it is condition",scrap buff tyre 1000 x 20 "as it is where it is condition",scrap buff tyre 225/235*75 "as it is where it is condition",scrap rubber dust,scrap rubber tube all size ( full round ) with/without valve,scrap flap all size,scrap batteries 6 volts,scrap batteries 12 volt small size,scrap batteries 12 volt big size ( plastic ),used empty engine oil barrels,used empty barrels of grease 180/182 kg.,brunt / used engine oil in barrels of 205/210 ltr's.,scrap seatframe m.s. with,scrap alu. sheet pcs./cutting trays bus body alloys etc. ( new ),scrap alu. sheet pcs./cutting trays bus body alloys etc. ( old ),scrap m.s. ( m.s.sheet cutting / m.s.boxes / trunk etc.),scrap field coil and main coil,scrap brass bussing and other brass article,scrap cast iron,scrap forging item,scrap iron,scrap spring steel flate ( above 1 feet )

Casting Item Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others