Latest casting work Tenders | Government casting work Tenders

Central Government And Public Sector

CTN :41015079

08 Jul, 2025 84.55 Lacs

Multi City - Bihar

Tender For construction of drain, soil filling, brick soling and pcc casting work from jagdari pond to yasi river and from sirchan prasad house to yasi river in village dhanhar of ward no. 7 of nagar panchayat ekangarasarai.

Central Government/Public Sector

CTN :40773560

16 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For corrigendum : repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with co

Central Government/Public Sector

CTN :40971427

29 Jul, 2025 40.00 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair to roof sheet rolling shutter valley gutter n ms door at nad v under age br ii of ge nd visakhapatnam

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

Central Government/Public Sector

CTN :40746664

15 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening

CTN :40962784

22 Jul, 2025 NA

Pakur - Jharkhand

Tender For supply of battery terminal made with brass , gland packing 8 mm thick rubber , emery paper of sorts , oil putty for glazing , ms hasp and stapple 75mm long , haps staple 100mm , timer switch for street light , rubber mat 2000x1000x12mm , ac metal clad box with plug top and mcb 20 amp , switch socket combination 6amp , switch socket combination 15amp , socket 6 amp 5 pin , piano switch 5a , bed switch 5a , db spn 8 way , db spn 4 way , angle batten holder , lamp holder , batten holder , pendent holder pvc , bell buzzer ding dong , regulator electronic type for ceiling fan , bell push switch , tape adhesive 25mm , ampire tape 25mm x 25 mtrs , insulation tape 15mm width , pvc flexible conduit pipe 20mm , casing capping size 25x32mm , plug top 3 pin 15a , plug top 3 pin 5a , fuse wire 20a , fuse wire 10a , fuse wire 5a , ceilling rose , lead sheet 3 mm , thermostat for geyser , heating element 1500 watt , heating element 2000 watt , indicator red green for geyser , coolent for dg set , engine oil 15w40 for dg set , engine oil 20w40 for dg set , dol starter 5 hp , cotton waste , distilled water , leather gasket 5mm , gi tee equal 40mm , ferric alum for water treatment purpose , calcium based chlorine chemical for water treatment , orthotodoline solution for chlorine testing , gi nipple 20 mm x 75mm , gi nipple 20 mm x 150mm , cp grating 150mm dia , cp grating 100mm dia , cp stop cock 15 mm , gi elbow 15 mm , gi elbow 20mm , gi union 15mm , gi union 20mm , gi tee 20 mm , gi tee 15mm , gi long screw 15mm x 150mm , gi long screw 20 mm x 150mm , gi socket 15mm , gi socket 20mm , gi reducer socket 15mm x 20mm , gi reducer elbow 15mm x 20mm , gi pluge 20 mm , gi pluge 15 mm , tarfelt in 20 mtr roll , plywood 8x4x4mm thick , plywood 8x4x6mm thick , partical board 8 x 4 x 19 mm , alumn sheet 0 point 5mm thick , stainless steel wire mesh 0 point 36 mm nominal dia of wire 15 mtr roll , ms handle 100mm , ms handle 150mm , ms tower bolts 200mm , tower bolt ms 150mm , aluminium tower bolt 150mm , alumn handle 125mm , curtain rod cp , steel knobs with bracket , m s but hinges medium weight 100 mm , m s but hinges medium weight 50 mm , m s but hinges medium weight 75 mm , wooden beading for fixing glass 10x10mm , hacksaw blade 25mm x 300mm , ms sliding door bolt 300mm , nails wire 65 mm , screw wood steel 25 mm , screw wood steel 15 mm , screw wood 40 mm , ms screw 50mm , condenser 1 point 5 mfd for wall fan , fuse wire 30 amp , teflon tape 10mm width , metal repair paste , aluminium tape water proof 50mm width , chlorine test kit , capacitor for ac 35 mfd , capacitor for ac 45 mfd , capacitor for ac 55 mfd , bearing grease for high power rating pump motor viz 100hp 60hp and 40hp

State Government

CTN :40853241

14 Jul, 2025 NA

Begusarai - Bihar

Tender For construction work of passenger shed, construction work of boundary wall, construction of security wall and pcc, pcc casting work, pcc work of the road, construction work of stage, construction work of drama stage, mud brick soling and pcc casting work, construction work of soil and paver blocks, construction work of safety wall at various locations

State Government

CTN :40853250

14 Jul, 2025 NA

Begusarai - Bihar

Tender For construction work of chhath ghat stairs, beautification work, renovation of devsavan baya river ghat and construction of chhath ghat, construction work of community toilet, construction work of library building, construction work of pcc, mud brick flooring and pcc casting work, pcc construction work, boundary wall work, construction work of double unit public library building at various locations

Central Government/Public Sector

CTN :40812410

14 Jul, 2025 65.72 Lacs

Delhi - Delhi

Tender For supply of supply of 4x8.5 ton ducable ceiling mount air conditioning plants equipment , supply and installation of 28.60 mm copper pipes of 15 mtr length each with suitable insulating material from indoor unit of 8.5 ton ac plant to outdoor unit. , supply and installation of 15.88mm copper pipes of 15 mtr length each with suitable insulating material from indoor unit of 8.5 ton ac plant to outdoor unit. , supply of 10 sq. mm 4 core copper cables and wiring of equipment upto switch board. , supply of 1.5 sq.mm 8 core copper control cables and wiring of equipment upto switch board. , supply of 4 sqmm 4 core copper cables and wiring of equipment upto switch board. , supply of pvc conduit pipe and other required misc. hardware as per requirement , misc essential work for hanging the machine and proper level with 10mm full threaded g.i. rod includes minor repair work with material of wall and ceiling surface. , providing and fixing of ms stand of proper size suitable for the outdoor unit. the stand should be made up of 50mmx50mmx5mm mild steel. , supply of misc. items required for completion of installation such as nut bolts, rubber gasket, 35mm dia drain pipe with insulation approx 30mtr etc. , providing factory fabricated ducting material in 20 gauge gi sheet, for plenum chamber. , providing factory fabricated ducting material in 22 gauge gi sheet for supply duct , providing factory fabricated ducting material in 24gauge gi sheet for some portion of supply duct and return duct including jointing the different pieces of duct with suitable hardware and rubber , providing and fabricating the 9mm nitrile insulation work inside the supply duct and plenum chamber. acoustic insulation for plenum chamber and machine mouth open cell with 9mm nitrile insulation , providing and fabricating the 9mm nitrile insulation work inside the supply duct and plenum chamber. acoustic insulation for ducting closed cell 9mm nitrile insulation , providing and fixing of 475mm x 475mm canvas of reputed make in between the plenum and machines. , providing and fixing dampers of size 475mm x 475mm , providing, fabrication and fixing of powder coated aluminium grill for supply air , providing, fabrication and fixing of powder coated aluminium grill for return air , installation, testing and commissioning of 4x8.5 ton ductable air conditioning plants. //bid details 2 / 25

Central Government/Public Sector

CTN :40809372

16 Jul, 2025 NA

Prayagraj - Uttar Pradesh

Tender For supply of 13 pin uic coupler plug assembly with adapter (repair kit) suitable for hog operation of lhb power car as per rdso modification sheet no: rdso/pe/ms/ac/0051-2011 rev.2 or latest [ warranty period: 30 months after the date of delivery ]

Casting Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors