Latest cathodic protection machine Tenders | Government cathodic protection machine Tenders

CTN :45252496

05 Jun, 2026 NA

Koraput - Odisha

Tender For bid to ras supply of isa 50x5x20 ft , flat 40x5 , earth work excavation , epoxy based zinc rich protective coating and primers in steel single coating , synthetic enamel painting , wire mesh , concrete foundation , installation and commissioning charges

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45391537

24 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of side sill of lhb coaches as per drg no le11181 alt c or latest upto the date of tender opening. item to be supplied with red oxide zinc chromate primer coating. as per drg.no. le11181 alt c specn: materail specification irs m:41-97 as per drg no le11181. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45121324

09 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of ht hex bolt of size m 16x35 mm, full thead length x 2.0 mm pitch, propertyclass 8.8, asper is:1364/pt-1/2023 with zinc coating. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45393559

11 Jun, 2026 NA

Yamunanagar - Haryana

Tender For supply of prevailing torque type hexagon nut size m16x1.5 mm with non metallic insert (polyamid) to is:7002- 2018 (reviewed in 2023) with property class-10 with zinc coating as per mdts 057 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45371980

19 Jun, 2026 NA

Medchal-T - Telangana

Tender For supply of counter sunk screw hex socket m10x25, coarse thread (pitch 1.5 mm) p.c. 10.9 to is: 6761/1994, with mechanical properties as per is: 1367 . note: countersunk screw bolts should confirm to zinc coating as per is:1367 (part 6):2002. [ warranty period: 30 months after the date of delivery ] ]

CTN :45364670

08 Jun, 2026 8.02 Lacs

Nawabganj - Uttar Pradesh

Tender For supply and installation of open gym equipment atinfront of girls college medical college campus kanpur - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone

CTN :45364576

08 Jun, 2026 8.02 Lacs

Kanpur - Uttar Pradesh

Tender For supply and installation of open gym equipment at face 2 park dayanand vihar kanpur - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone

CTN :45364577

08 Jun, 2026 8.02 Lacs

Kanpur - Uttar Pradesh

Tender For supply and installation of open gym equipment at sai park in front of sai mandir kanpur - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone

CTN :45364585

08 Jun, 2026 8.02 Lacs

Kanpur - Uttar Pradesh

Tender For supply and installation of open gym equipment at sainik vihar park doubletanki park world bank barra kanpur - chest press cum seat puller, chest press (double )product area 1675 mmx782 mmx2160 mm.safe play area-3100mmx1850mm.center pipe-114 mmod gi b vlass pipe.seat frame 42 mm od gi b class pipe.leg frame 42 mm od gi b class pipe., leg press double:cable diameter 1910x500x1550 mm.length 98 "xwidth 54 3/4"xheight 56".extra wide footplate., push up bar, arm shoulder excer cise two peqple :out put(shoulder wheel ): full climbing work out for whole body.dimension above ground: 1220 x 760 x 500 mm main frame: 1140d heavy duty pipe.arm handle/leg frame 25/320d ms pipe. cap: nylon injection moulded.nut bolts: zinc coated bolts. we do pure polyester power coated (50-60microns) for attractive looks which is meant for utdoor usage, space walker: space walker is the best alternative to elliptical training equipment., seated puller:main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, sit up bench :main pipe dia-127 mm thickness 3 mm.base plate dia-200 mm,thickness-10 mm.powder coating. size 1600x1065x580 mm, taich 2 in 1, triple twister, bicycle-bicycle :is the most common exercise equipment since from last many yearsincluding full lower part of bodyfrom feet calf knees,waist and half abdominal., air walker, foundation and erection ,installation of all gym equipment, s/fixing of granite stone

Cathodic Protection Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector