Latest cattle catcher scrap Tenders | Government cattle catcher scrap Tenders

Central Government/Public Sector

CTN :45415119

11 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of rolling stock - scrap condemned wagon 08 wh bg-1.cr 10019602379 boxnm1 less items-door rester- 4,door-2,hand brake wheel-1,d.carriar-1, foot step-1. 2.ser 10079619232 boxnm1 less items-door rester-2,door-4,e/l device rod with bracket-1. 3.sc 10099662553 boxnm1 less items-dv-1,door rester-4,door-2,d.carriar-2,ladder-1,control reservoir-1. 4. sc 25099615980 boxnrm2 less items-dv-1,door rester-4,door-2,hand brake connecting link-1,control reservoir-1. 5. ser 10079619225 boxnm1 less items-dv-1,door rester-4,door-4,hand brake wheel-2,e/l device rod with bracket-1, d.carriar-2,hand brake connecting link-1,control reservoir-1. 6. ser 10079664829 boxnm1 less items-dv-1,door rester-4,door-2,hand brake wheel-1,d.carriar-2,hand brake connecting link with lever-1,control reservoir-1.

Central Government / Public Sector

CTN :45384040

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 017 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnhs m1, , bcn m1, bobrn m1 , boxn m1 ,wagons available on rails. 1) nfr boxnhs m1 12059609882,2) cr bcn m1 30019160198 , 3) cr bcn m1 30019160730,4) er bobrn m1 72029562814, 5) ser boxn m1 10079660845. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower.22.cut of angle cock. 23. bcn swing, 24. bcn flap, 25. bronze bushes ds8 no : 0999603017 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 56.793 mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384041

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 018 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1, bcn m1, wagons available on rails. 1) cr boxn m1 10019601099 ,2) ser bcn m1 30079160169, 3) cr boxn m1 10019660942,4) scr boxnr 25099631638 , 5) cr boxn m1 10019661383 . location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8 . casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11. distributer valve 12. cp pb with control reservoir 13. sab, 14) boxn doors 15. yoke pin support (1st plate), 16. safety plate with anchor plate (2n d plate), 17. yoke support plate(3rdplate), 18. yoke pin 19. draft gear follower . 20 knuckle pin. 21. knuckle thrower. 22. bcn swing, 23. bcn flap, ds8 no : 0999603018 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 49.729 (m.s 45.397, ss-4.332) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

Central Government / Public Sector

CTN :45384042

09 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 3132606 020 pl no 98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis), scrap of cond. & u/s. 8 wheeler , boxnr , boxn m1, boxnha m1 , wagons available on rails. 1) scr boxnha m1 10099637117 , 2) ser boxnr 25079560408 , 3) er bobrn m1 72029463111,4 ) wr boxnr 25089660303 , 5) cr boxn m1 10019660997. location road no. 1 at dump yard. rc items: . 1 .coupler bodies (nt), 2 .yokes 3 .knuckles, 4.draft gears, 5.striker castings (nt), 6.centre pivots, 7. casnub bogies with all fittings, 8. casnub bogies without all fittings, 9.break cylinder 355, 10. auxiliary reservoir 100, 11.sab 12) boxn doors 13. yoke pin support (1st plate), 14. safety plate with anchor plate (2n d plate), 15. yoke support plate(3rdplate), 16. yoke pin 17. draft gear follower . 18 knuckle pin. 19. knuckle thrower. 20.cut of angle cock.21. bronze bushes ds8 no : 0999603020 dt: 30 .05 .25. note to purchaser : before delivery of wagon cut off parts, the declared rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 46.507 (m.s 37.989, ss-8.518) mt sold on number basis only delivery in cutoff parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos

CTN :45384028

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - scrap iron and steel which will be released after cutting of cond. 8 wheeler bg bcnm type wagon. wagon no. 30029160409/bcnm-1/er tw 27.20mt 30029162540/bcnm-1/er tw 26.30mt 30079171639/bcnm-1/ser tw 27.20mt 30029125941/bcnm-1/er tw 25.20mt 30019160464/bcnm-1/cr tw 25.27mt 30029126597/bcnm-1/er tw 25.50mt 30099160040/bcnm-1/scr tw 24.80mt 30029126573/bcnm-1/er tw 27.20mt 30029160089/bcnm-1/er tw 24.80mt 30069110853/bcnm-1/sr tw 26.60mt 30079170571/bcnm-1/ser tw 26.30mt 30029127792/bcnm-1/er tw 25.50mt 30079170946/bcnm-1/ser tw 25.60mt 30029160232/bcnm-1/er tw 24.56mt 30069160681/bcnm-1/sr tw 27.08mt 30079161012/bcnm-1/ser tw 26.90mt 30079170694/bcnm-1/ser tw 25.60mt 30039160390/bcnm-1/nr tw 26.72mt 30019161621/bcnm-1/cr tw 26.50mt 30079160985/bcnm-1/ser tw 26.00mt 30019160105/bcnm-1/cr tw 27.20mt 30079168691/bcnm-1/ser tw 26.70mt complete/incomplete, sort and sizes, with or without doors, without excluded items. (cutting allowed and delivery will be given in pocket yard mws izn)

Central Government/Public Sector

CTN :45045923

03 Jun, 2026 11.22 Lacs

Bhilai - Chhattisgarh

Tender For bid to ras corrigendum : providing of custom bid for services - capital repair jobs of htb lo53 scrap shears and scrap conveyors of plate mill maintenance of hot transfer bed of plate mill bed proper & discharging side during cr

CTN :45374531

09 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

Central Government/Public Sector

CTN :45374482

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of rolling stock - steel scrap cut of condemned wagons 8 wheeler (b.g.) with out wheel set and trolly delivery on nagra siding condition wagon no.(1)sc 25099737545 boxnr (2 )se 10079763904 boxnr(3)sc 10099616068 boxnr r(4) cr 25019860216 boxnr (5) sc 25099760840 boxnr (6) sc 10099560095 boxnr . note:- delivery on actual weighment basis. maximum permissible deliverable quantity is lot qty. 06 nos(48.080mts) cutting allowed for easy loading returnable items will not be delivered and will be returned by the purchaser as per the lists attached at the sr. no. 18,19 and 20 in the special condition for sale attached with the auction catalogue in returnable items list centre pivot retainer will be add and sab control rod head as sab with control rod.not returnable items 1. foot step l 2. loaded tie rod 3.sets of pipe. lot qty. on approx basis weight 06 nos(48.080 mts) advice note no.- 25-03316 dt-20.03.26,25-003287 dt-02.03.26. and 25-03385 dt-20.03.26note- wagon lots to be sold on number basis and delivery in mts basis, purchaser should read the nagra siding condition of special condition of e- auction governing the sale and satisfy themselves before bidding.note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot

Central Government/Public Sector

CTN :45343075

05 Jun, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 93919 vpu 2. cr 93834 vpu 3. special repair 93832 vpu 4. cr 93915 vpu r/items: 1. wheel set with axel, axel box cover of all coaches=16 sets & complete 08 trolley with fittings. 2. dv of all coaches = 04 nos and bmbc of all coaches = 16 nos. 3. draw bar hook with screw coupling complete assembly = 08 nos. 4. buffer plunger = 16 nos, and buffer casing=16 nos of all coaches. 5. lot will be sold on number basis. remark: - 1. coaches are lying at roh sick line no.03 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard. location: roh sick line no.03 at cla cutting yard. stock holder:-sse/roh/c&w ltt.

Central Government/Public Sector

CTN :45343076

05 Jun, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 041122 wgaccw 2. cr 041263 wgaccn 3. cr 041317 wgaccn r/items: 1. wheel set with axel, axel box cover of all coaches = 12sets & complete 06 trolley with fittings. 2.dv of all coaches = 03 nos and bmbc of all coaches = 12 nos. 3. draw bar hook with screw coupling complete assembly = 06 nos. 4. buffer plunger = 12 nos, and buffer casing = 12 nos of all coaches. 5. alternator = 06 nos, motor pump = 05 nos and rru=03 nos. 6. lot will be sold on number basis. remark: - 1. coaches are lying at line no. ktc 04 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard.. location: line no. ktc 04 at cla cutting yard. stock holder:-sse/roh/c&w ltt.

Cattle Catcher Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors