Latest cattle catcher Tenders | Government cattle catcher Tenders

State Government

CTN :45411312

24 Jun, 2026 1.85 Lacs

Multi City - Chhattisgarh

Tender For civil works for providing and fixing cattle catcher at entrance gate of division office cspdcl dongargaon.

CTN :45372913

22 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of 'qn1k', q-series neutral line relay, 1000 ohm, working over 24v dc and having 6f/6b metal to carbon contacts, complete with plug board, connectors and retaining clips conforming to brs:930 & rdso letter no sts/e/relays/uea/pi dated 30.05.97 annexure i or latest and irs:s-34/68 amd.6 or latest & s-23/88 amd.1 or latest. the interlocking code for this unit shall be "bdekx". [ warranty period: 30months after the date of delivery ] ]

CTN :45372919

22 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of qna1k, q series neutral line relay, 1000 ohms, ac immune, plug-in type, working over 24v dc and having 6f/6b metal to carbon contacts, with plug board, connectors and retaining clip conforming to brs:931a, irs:s/60/78 amd.1 or latest, irs:s-34/68 amd.6 or latest & s-23/88 amd.1 or latest & rdso spec. no. sts/e/relays/uea/pi dated 30.05.97annexure ii or latest. the interlocking code for this unitshall be "cdeky" [ warranty period: 30 months after the date of delivery ] ]

CTN :45422910

07 Jul, 2026 NA

Multi City - Multi State

Tender For relay, plug in type, style "ac led" all aspects, ac lamp proving relay unit with in-built current transformer type, slow release neutral line relay, 4f. 4b contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110v ac , led signal lamp rated at 15w confirmingto rdso spec. sts/e/relays/ ac lit led signal/ 09-2002, amd-1 brs: 941a, irs: s 34 & irs: s 23 (as applicable). the interlocking code for this unit shall be abdhk". [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 500 units per month , commencement time allowed -2 month ]

CTN :45379400

20 Jun, 2026 NA

Midnapore - West Bengal

Tender For procurement of consumables for oh of u6, 2026 under ahp-mm and tm dept, ktps. - pu tube connector 1/2 1/2" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/2inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector 1/4" to 10 mm npt(m) 1/4" to 10 mm npt(m) pu tube connector ( push male pu tube connector thread size: 1/4 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube connector size 10 mm diax3/8in bsp(m) ( push male pu tube connector thread size: 3/8 inch pipe size: 10mm, moc: metal body (chromed) with pbt cap fluid: air operation: push-in make-aeroflex/spac pneumatic ), pu tube,od-10mm, id-6.5mm pu tube od-10mm,id-6.5mm,wall thickness1.75 mm,temp range-40f to+160f,hardness shorea98,brust pressure(psi)-450, vacuum rating-to 28"hg,working pr.(psi)-150 @70f ( make:-aeroflex/spac pneumatic ), anabond 666 size 310 gm # ( thixotropic silicone sealant in hdpe cartridge (310g) make:-anabond ltd ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe ( schedule 40 no negative tolerance in thickness is allowed ), bend,ms,200x200x90 deg ash water line ( seamless, schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend,ms,150x150x90 deg ash water line ( seamless,schedule 40 thk-9.52mm no negative tolerance in thickness is allowed ), bend pipe,90 deg, 50nbx50nb,ms seamless for wet ash system moc:-ms thk-4mm as per sch 40 steel pipe, bend,ms,80x80x90 deg ash water line ( seamless, sch-40 thk-7.0mm no negative tolerance in thickness is allowed ), bend,ms,100x100x90 deg ash water line ( seamless,sch-40 thk-7.5mm no negative tolerance in thickness is allowed ), u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts & 02 nos of washers for each u-clamp ), turn buckle,gi ( with ms mounting bracket type-eye to eye eye hole should be for m20 bolt total length-1350mm thk-20mm square section-50x250mm ), gasket,200nb coupling,neoprene rubber for ash conveying line ( temp withstand capacity-140 deg celcius ), flat gasket,8 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,9 inch,od,11 inch,th.,1/4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,6 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,7 in,od,8-3/4 inch,th.,1/ 4 inch ( temp withstand capacity-140 deg celcius ), flat gasket,10 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,11 in,od,13 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), flat gasket,9 inch,nitrile rubber # for dry ash line sleeve coupling, for dry ash line sleeve coupling, for dry ash line sleeve coupling, id,10 in,od,12 in,th.,1/4 in ( temp withstand capacity-140 deg celcius ), gasket,graphite coated asbestos,10 inch # # for sleeve coupling in vacuum line ( temp withstand capacity-140 deg celcius ), gasket,9 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket,6 inch,graphite coated asbestos # # for sleeve coupling in vacuum line,stg.-2 ( temp withstand capacity-140 deg celcius ), gasket for esp hopper gate mouth hand hole od-170mm,id-120mm,thk-5mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper chute face od-400mm,id-315mm,thk-3mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper hand hole for actuator sa25e125 od-118mm,id-90mm,thk-9mm for fly ash system,unit-4,5,6 ( moc-neoprene rubber temp withstand capacity-140 deg celcius ), gasket for esp hopper v

Corporations And Associations And Others

CTN :45328794

08 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

Central Government And Public Sector

CTN :45393084

18 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of industrial metal cutting gas (lpg), in 19kg capacity. non-domestic non-exempted (ndne) cylinders, spec: as per is 4576:2021 (fourth revision).working flame temperature in oxygen shallreach equal to or more than 2950 %b0c. make nanocut (iocl), bmcg (bpcl), razor (hpcl) or similar.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45102459

08 Jun, 2026 18.60 Lacs

Orai - Uttar Pradesh

Tender For corrigendum : supply of cattle catcher vehicle (v4) (q2)

Central Government/Public Sector

CTN :45392375

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of self tapping slotted pan head tapping screw, size: st 4.8 x l 13, zink plated for sheet metal working, confirming to is: 7173-1974 (latest 1988). [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45404242

17 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of relay plug in type style qecx ac led all aspect ac lamp proving relay unit with inbuilt current transformer type slow release neutral line relay 4f-4b contacts front and back contacts metal to carbon shall be suitable for working in series with the 110v ac led signal, lamp rated at 15w, confirming to rdso spec.sts/e/relays/ac lit led signal/09-2002 amdt.1, brs:941a, irs-s-34 and irs-s-23 as applicable. the interlocking code for this unit shall be abdhk. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Cattle Catcher Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

Central Government And Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector