Latest caustic soda tank Tenders | Government caustic soda tank Tenders

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

Central Government/Public Sector

CTN :45652173

20 Jul, 2026 60.00 Lacs

Raigad - Maharashtra

Tender For repair replacement and maintenance of external water supply pipe line and allied works cleaning and sanitization of under ground semi ug sumps including commected works at rl 300 rl 150 volna tower and nad pump house under age e m ii nw karanja

CTN :45628750

27 Jun, 2026 50.58 Lacs

Raigad - Maharashtra

Tender For repair and renovation of moose cottage, cleaning of ug water tank, construction of central watch tower at magnetic observatory, iig, alibaug, raigad.

State Government

CTN :45606470

29 Jun, 2026 25.28 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of hardware material for annual repair and maintenance for f/y 2026-27 supply of oxidised mild steel hasp and staples (safety type) 115 mm of approved quality., supply of oxidised mild steel screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 30 mm, d. 35 mm, e. 50 mm, f. 60 mm, g. 75 mm, supply of ss screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 32 mm, supply of black screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, supply of chipboard screws (pkt. of 200 nos.) (patta, omni make or equivalent), a. 3.5 x 20 mm , b. 3.5 x 25 mm, c. 3.5 x 32 mm, d. 3.5 x 38 mm, e. 3.5 x 50 mm, f. 3.5 x 60 mm, g. 3.5 x 75 mm, supply of oxidised mild steel sliding door bolt of approved quality. , a. 250 x16 mm, b. 300 x16 mm , supply of oxidised mild steel handles of approved quality., a. 100 mm, b. 125 mm, supply of anodised aluminium tower bolt (barrel type) of approved quality., a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, d. 250x10 mm, e. 300x10 mm, supply of aluminum sliding door bolt of approved quality., a. 250 x16 mm, b. 300 x16 mm, supply of oxidised mild steel tower bolt (barrel type), a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, supply of anodised aluminum handles of approved quality., a. 75 mm, b. 100 mm, c. 125 mm , d. 150 mm, supply of plywood water proof (make green, duro, century, archidply, modiply & evergreen), a. 06 mm, b. 09 mm, c. 12 mm , d. 18 mm/19 mm, supply of marandi/red champ cut to size including grooving & finishing all respect (well seasoned), supply of second class teak wood cut to size including grooving & finishing all respect (well seasoned), supply of teak plywood (make internet maxima & sanik, green, national or equivalent), a. 04 mm, b. 06 mm, c. 12 mm , supply of marandi wood beading finishing all respect (well seasoned), a. 1/2" x 3/4" , b. 1.1/2" x 1/2", supply of sunmica sheet (8' x 4') as per sample or approved quality. (make green, duro, century, archidply, modiply & evergreen), a. 0.8 mm, b. 01 mm, supply of masking tape , supplying of panelled shutter for doors including isi marked black enamelled m.s. butt hinges with necessary screw, including panelling of 12 mm thick water proof ply. kiln seasoned and chemically treated hollock wood. 30 mm thick shutter. , supply of block board construction flush door with teak wood ply on both faces 30 mm thick of approved quality., supply of wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35mm thick shutters kilin seasoned and chemically treated hollock wood , supply of pvc door shutter as per is , specification of sintax, rajshiri or make or equivalent, supply of wood primer (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of water based exterior primer (nerolac, asian, burger, dulux or equivalent ), supply of red oxide primer (nerolac, asian, burger, dulux or equivalent), supply of synthetic enamel paint (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of terracotta paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of acrylic smooth exterior paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of plastic emulsion paint (nerolac, dulux, asian, burger, dulux or equivalent make), supply of touch wood polish (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of turpentine oil of approved quality., supply of spirit of approved quality., supply of colure tube (100mm), supply of paint roller (size 10”), supply of thinner, supply of silicone, supply of siller, supply of putting patti of approved quality., supply of malmal/mulmul cloth of approved quality., supply of lime (as per approved sample), supply of indigo (neel) (as per app

State Government

CTN :45595794

08 Jul, 2026 9.94 Lacs

Doda - Jammu And Kashmir

Tender For repair and renovation of hospital at base camp including procurement of lab instruments chanderkote. - demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of engineer-in charge:1:3:6 or richer mix (i/c equivalent design mix), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), providing upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand), providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. in colour such as white, ivory, grey, fume red brown, providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm, providing and fixing ply wood 5 ply with commercial ply on both faces 6 mm thick, dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick, providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. second class kail wood., providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :budloo / fir wood., providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. first class kail wood 30mm, providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm, providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm, providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 liter low level white p.v.c. flushing cistern,

CTN :45585693

30 Jun, 2026 NA

Patiala - Punjab

Tender For supply of painting & hardware material, wood, glass panes, sand and cement for repair of quarter no.q-29 at pup - oil bound distemper, wall care putty neel , sand paper 100,120 no., universal water stainer tube yellow oxide , s/e white paint ist quality 10 litree capacity , s/e white paint ist quality 4 litre capacity , s/e oxford blue paint , fevicol ddl ,,t.t. oil , paint brush , wire netting 22x12 gauge , glass panes ,glass putty ,commercial plywood , m.s. nails , m.s. black nails , aluminium tower bolt , aluminium handle , m.s. screw , iron door spring ,kail wood etc..

CTN :45585738

30 Jun, 2026 NA

Patiala - Punjab

Tender For supply of painting & hardware material, wood, glass panes, sand and cement for repair of quarter no.q-34 at pup - oil bound distemper , wall care putty, neel sand paper 100,120 no., universal water stainer tube yellow oxide , s/e white paint ist quality , s/e oxford blue paint (ist quality), fevicol ddl , t.t. oil, paint brush , kail wood , red marindi wood , wire netting 22x12 gauge ,glass panes ,glass putty, m.s. hinges , aluminium tower bolt, aluminium handle , aluminium double door stopper, conduit pipe , palmet patti , iron door spring ,,m.s. black nails , m.s. nails etc..

Central Government/Public Sector

CTN :45596533

08 Jul, 2026 45.00 Lacs

Ernakulam - Kerala

Tender For comprehensive maint of 3 x 39 tr chiller unit cooling tower condenser chilled water pipeline ahus at inhs sanjivani and comprehensive maint of 60 tr chiller unit installed at fats at naval base kochi repair replacement of dampers and certain miscellaneous r

CTN :45419643

18 Jun, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of servicing of all weather split ac 1 ton , servicing of all weather split ac 1.5 ton , servicing of window ac 1.5 ton , servicing of split ac 2 ton , servicing of all weather split ac 2 ton , servicing of 2 ton tower ac , filling of r32 gas , filling of r22 gas , repair of compressor of split ac , indoor unit motor repair , repair of gas pipe , water leakage repair , pcb repair of split ac , fan capacitor change 8 mh , capacitor change 60 mh , flushing of indoor unit 1.5 ton split ac , flushing of indoor unit 2 ton split ac , overhauling of 1.5 ton split ac

State Government

CTN :45425570

18 Jun, 2026 3.48 Lacs

Thiruvalla - Kerala

Tender For corrigendum : general-repair works in toilets and other micellaneous works at revenue tower, thiruvalla-repair works on water & sanittery lines and fittings and other micellaneous works at revenue tower, thiruvalla-general civil work

Caustic Soda Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government