Latest cbrn suits Tenders | Government cbrn suits Tenders

CTN :41010704

19 Jul, 2025 NA

Bathinda - Punjab

Tender For supply of clip wome drive 14 27mm , shim , spacer , nipple grease , boh 31b , nut lock 3 8 inch unf , seal pivot pin , door tided glass lower , side cutter left hand and right hand , tooth bucket , bolt plough 3 4 unf 70mm , cap side shift stabilizer , side door lower glass , door cylinder , door stopping strap , break light bulb , head light bulb , cylinder mounting bolt with spring , pin lock bolt , back and front bucket pin , bucket teeth , nut and bolt , battery cut off switch , bulb 12 amp and 24 amp , house clamp small med large , bolt and nut size 19 to 27 , togal switch two position , gear leaver knobe , hours meter , gas spring with back , hex bolt m8x3d , brake fluid storage container with pipe , view mirror , element primary secondary filter , foot plate bolt , gd plate bolt , self starter stating and mounting bd80 , track roller assy df , bushing master , pin master , operator seat set , side arm lock pin , spring washer , fuze 10amp 15amp 25amp , carbonator , throttle shaft , ignition coil , decal throttle , pivot pin

Central Government/Public Sector

CTN :41011037

30 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of supply of 97 type loose tools d d - clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , clamp_medium duty , clamp _medium duty , clamp _medium duty , clamp _medium duty , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , tungsten carbide rotary burrs , screw bits for torq-set head screws , screw bits for torq-set head screws , try square _engineer s square , try square _engineer s square , hexagon allen key set , hexagon allen key set , hss hand tap set , hss hand tap set , hss hand tap set , hss hand tap set , adjustable tap wrench 2-8mm l-180mm , round file with handle , round file with handle , triangular file with handle , triangular file with handle , half round file with handle , flat file with handle , centre punch , aviation snips / shear , aviation snips / shear , aviation snips / shear , straight nose internal circlip plier , straight nose internal circlip plier , straight nose internal circlip plier , straight nose internal circlip plier , straight nose external circlip plier , straight nose external circlip plier , straight nose external circlip plier , straight nose external circlip plier , straight nose external circlip plier , chisel with guard , flat chisel , flat chisel , flat chisel , mortise chisel , putty blade with handle , putty blade with handle , clico plier cleco plier , cleco pin , cleco pin , cleco pin , eqvt camloc plier _for use with 2600 , 2700 and 4002 stud series camloc fasteners , cherrymax hand squeezer , interchangeable head _tip_ mallet _ hammer , eqvt straight rivet driver _for an430 rivet , eqvt straight rivet driver _for an430 rivet , eqvt straight rivet driver _for an430 rivet , eqvt straight rivet driver _for an430 rivet , eqvt straight flush type rivet driver _for an430 rivet , eqvt offset rivet driver _for an430 rivet , eqvt offset rivet driver _for an430 rivet , eqvt offset rivet driver_for an430 rivet , eqvt offset rivet driver_for an430 rivet , eqvt straight flush mushroom type rivet driver _for an430 rivet , inst_ remvl tool green_white _metal , inst_ remvl tool green_white_metal , inst_ remvl tool green_white_metal , inst_ remvl tool green_white , inst_ remvl tool green_white , inst_ remvl tool green_white , inst_ remvl tool green_white , inst_ remvl tool green_white , eqvt strap duplicator _bushing type , eqvt strap duplicator _bushing type , eqvt strap duplicator _bushing type , hot air gun , electric drill gun , battery operated drill gun , rechargeable cordless led lamp for inspection_ workshop , 84 90 degree pneumatic drill gun , universal 360 degree angle drill gun , pistol type hammer rivet gun _3x , hexagonal socket_1 sq dr_ 65mm

CTN :40716173

16 Jul, 2025 NA

Dhemaji - Assam

Tender For corrigendum : supply of fpv battery strap , battery explosion proof bag , 12.9 grade black nickel plated button head screw m2 m2.5 m3 5mm,7mm,8mm,12mm , 7075 aluminium 20mm 25mm standoff spacers , soldering wire , double side tape , rp-sma connectors male female , capacitor , zip ties , heat shrink tubing , thread locker , micro fiber cloth , micro fiber cloth for lens , isopropyl alcohol , 18650 cell , super glue , soldering flux , electrical insulation tape , xt 60 connector

CTN :41001910

21 Jul, 2025 NA

Sultanpur - Uttar Pradesh

Tender For supply of cotton web strap o. g. 25 mm (1 ) wide to spec is: 6488-1987 , clip, end (strap) tip brass 25 mm of web equipment, patt, 37 brass fitting, tips, with eyelet holes shee , eyelet aluminium sail type with plain washer to size no. 21 to specn is: 4084-1978 , buckle, brass, quick release, 25mm wide commercial quality to specn is: 4274- 1981 , washer plain brass 6.4mm to specn is: 2016 & is: 319 , rivet copper snap head 6mmx16mm long to specn is: 290 7-64 , steel srtip thickness 3mm in width of 25mm in running length to specification is: 5986-2011 grade 205

CTN :40974712

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of spring washer (p-22) , locking washer (plate no-7) , fibre washer , fibre washer , nut for adjusting rod (p-14) , sealinf ring for 14 & 19 , slotted nut (p-26) , rivet flat hd (p-07) , rivets , rivet flat head (p-14) , grease nipple (plate no-7) , lock nut (plate no-7) , cotter pin , pin for leve , link lever (ctlg fig-03) , clamp , copper washer , set screw (fig-i) , gasket exhaust manifold , key for coupling (plate no-4) , grease nipple (p-09) , locking wire (fig-i) , stud , union (p-04) , union , nut (p-15) , rock stud (plate no-7) , stud (fig-i) , stud (fig-i) , pin for die (plate no-7) , clutch spring , oil lubricator (plate no-4) , clutch opening die (plate no-7) , step bolt (p-16) , joint , water inlet manifold to cylinder head , joint end , drain plug (plate no-14) , joint , venturi to induction mainfold(ms-202) , drain plug , bonnet clips (plate no-2) , thrust washer (plate no-3) , stud cyl block , thrust washer (p-14) , cap , inlet and exhaust valve(ms-192) , joint exhaust manifold outlet flange(ms-196) , gland , fuel tap , die , heater switch (p-20) , hose connection , fixing pin (plate no-4) , spring for adjusting rod(p-14) , pad oil filter element(ms-175) , oil seal housing (plate no-4) , dust excluder (plate no-3) , fork operating spindle (plate no-7) , stud , gland for cock , fuel filter (p-21) , adjusting rod (p-14) , joint for hanger , pin for die & split pin , dog , spring inlet and exhaust valve outer(ms-190) , clamping stud with nut(fig-i) , locking nut (fig-i) , filter cap (plate no-14) , oil pressure gauge(p-20) , joint , outer clamping plate (plate no-10) , pin for pivot bracket(p-17) , driving belt , plate driving(facing in 3 segment) , belt water pump , pin for coupling (plate no-4) , oil pressure meter (plate no-14) , rubber coupling (plate no-4) , fulcrum pin (p-15) , bush for clutch plate (fig-i) , distance end piece (fig-i) , coupling block (plate no-4) , shim set (fig-i) , bearing (fig-i) , top bush (plate no-3) , ball brg , worm case cover (plate no-4) , sealed ball bearing , selector lever(p-15) , split universal coupling (plate no-4) , universal coupling (plate no-4) , flexible hose , bearing (plate no-4) , bush for clutch operator (fig-i) , collar assy (ctlg fig-03) , backrest(plate no-18) , bottom cushion (plate no-18) , side clutch operating (plate no-10) , clutch operating fork (plate no-7) , clutch lining set (fig-i) , reverse clutch plate (plate no-10) , forward clutch plate (plate no-10) , 2nd inter shaft (fig-h) , forward clutch plate assy , brake ferodo (p-14) , housing cover r.h for 3rd inner shaft , spindle for steering (plate no-4) , ferode lining , clutch lining , bevel wheel , bearing (fig-i) , bearing cover rh for 3rd inner shaft , coupling shaft , bearing (fig-i) , main bearing housing (fig-i) , driving disct , pinion 1st and 3rd speed (fig-h) , pinion 3rd & 4th speed(30 teeth(fig-h) , pivot (plate no-3) , brake strap assy , rear foot plate

CTN :40974719

15 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of grease nipple(fig-i) , nut for adjusting bolt(fig -j) , locking wire(fig-i) , cheese head bolt with nut(strong diseel rr fig-i) , pin for clutch link(fig-i) , sealinf ring for 14 & 19 , pin for clutch link(fig-i) , cheese head bolt(fig-i) , set screw(fig-i) , bolt for key washer(fig-d) , driving pin(strong diesel rr fig-i) , key (rr strong fig-f) , oil seal , fulcrum pin for ball lever(fig-i) , key for steering(p-11) , pin for clutch casing(fig-i) , key (rr strong fig-f) , spnr tubular box 14x17mm , eye ball(fig-i) , oil seal(plate-h) , clutch link(fig-i) , key for coupling(p-11) , clamping plate(fig-i) , pin for coupling(p-11) , start push button(p-32) , locking bolt(p-11) , lock nut with locking(strong p-26) , lock nut with locking(strong p-26) , oil seal(strong diesel road roller f-i) , end plate lh(strong p-23) , washer & slotted nut(strong p-26) , stud(strong p-25) , filter element , fuel stop cock(p-32) , ignition switch(p-32) , release lever , key washer(fig-d) , lock nut with locking(strong p-26) , clutch ball lever(fig-i) , break trunion nut(strong p-28) , distance piece(fig-h) , distance water(fig-h) , pin for axle cap(p-13) , falcrum pin with nut pin (p-28) , light switch(p-32) , outer clamping plate(fig-i) , bearing , shim set(strong p-26) , thrust washer(p-13) , inner clamping plate(fig-i) , shim set(strong p-23) , oil pressure gauge (p-32) , bush(strong p-26) , link for foot brake lever(p-28) , head light 12 v (ms sl no-87) , pipe fuel oil leak off assy , roller bearing(fig-i) , clutch facing ring(strong diesel rr fig-i) , water temp gauge(p-32) , bearing(fig-h) , bearing , foot brake pedal(p-28) , forward clutch plate center(fig-i) , brake lining set(fig -j) , nozzle fuel injection , element air filter , hours meter (p-32) , shim set(strong p-21) , guide plate(fig -j) , bushing , forward clutch plate (fig-i) , side clutch operator(fig-i) , bearing , starting pulley (p-36) , rubber hose (ms sl no-100) , trust bearing(fig-i) , roller bearing , bearing(strong p-26) , bearing(strong p-26) , cover for bearing housing(strong p-26) , bush(p-23) , bush(p-23) , coupling block(p-11) , universal coupling(p-11) , bearing housing back(strong p-26) , bearing , clutch pressure ring(fig-i) , bearing(p-25) , break strap with lug(fig-j) , split universal coupling (p-11) , bearing , adjusting set lh(strong p-23) , clutch casing sleeve(fig-i) , 1st inter shaft pinion(28t)(fig-h) , fd pinionrh(14t)(plate h) , steering wheel(p-11) , radiator assy , bearing(fig-h) , bearing housing for ist inner shaft(strong p-21) , steering pinion(fig-d) , bevel gear -rh(fig-h) , 1st inter shaft & pinion(14t)(fig-h) , housing cover for ist inter shaft(strong p-21) , warm wheel(fig-d) , f.d pinion lh(14t)(plate-h) , clutch driver(fig-i) , clutch shaft(strong p-26) , spiral bevel wheel(strong p-21) , matched point set(comprising-rhh2 , rio58 & rio62) , bevel gear(strong p-23) , steering worm(p-11) , spiral bevel pinion fwd(strong p-26) , spiral bevel pinion reverse(strong p-26) , starter motor locas type 25m 114 , integrated gear (30 oblique 477) comprising with 03 items , cylinder head assy(minor) (including 11 items)

CTN :40821460

17 Jul, 2025 NA

Multi City - Rajasthan

Tender For corrigendum : requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating m

State Government

CTN :40955689

21 Jul, 2025 5.82 Lacs

Multi City - Karnataka

Tender For procurement of various ro membranes house fittings required for maintenance of rodm system - thrust cone (ro system), pwt seal (ro system), adapter seal (ro system), adapter kit (ro system), spiral ring (ro system), head seal (ro system), head assembly (ro system), ro membrane housing, strap screw.for ro pre, strap assy for ro pree vess, saddle for ro pres vess

Central Government And Public Sector

CTN :40945907

14 Jul, 2025 NA

Bengaluru - Karnataka

Tender For industrial safety helmet white colour having glazed surface finish and made as per is-2 925-1984. the helmet shall be made of abs grade plastic material suitable for use in heat zone applic ation. the helmet shall have nape strap type adjustable ratchet with nylon tape chin strap. sweat ab sorption pad should be provided at the front of head band inside. an opening slot of 20mm x 3mm on both sides of the helmet is to be provided for fixing ear muffs. ventilation holes to be provided in the shell to permit circulation of air inside the helmet. the helmet should be isi/dgms approved and henc e the helmet shall have isi/dgms mark. indian railway monogram shall be screen printed on the front side of the helmet. the successful bidder shall submit the sample after placement of purchase order a nd obtain approval of the sample before bulk supply as per cvc guidelines. offer should accompany c opies of isi/dgms valid approval letter for technical scrutiny. size: medium. inspection will be carried out at rwf as per approved sample. ]

CTN :40940176

24 Jul, 2025 29.1 Thousand

Ajmer - Rajasthan

Tender For supply of clamp meter , nose pliers , socket set 15 pcs , allen key set , head light with strap

Cbrn Suits Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector