Latest cc bench Tenders | Government cc bench Tenders

State Government

CTN :45519882

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat chimbali. - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole 1-3-3, supplying and e

Central Government/Public Sector

CTN :45389583

22 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For conversion of bus type platform shelter along with cc benches on pf-1 at utl, rhi, twl & ohv stations, ge station at pf-2 & provision of 01 toilet block for ladies and gents with urinal & 03 nos. water booth at odhava station.

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

CTN :45340023

10 Jun, 2026 178

Mandya - Karnataka

Tender For water supply items - bl_ 6 inch threaded end cap, bl_ relay unit-motor, bl_ 7.5hp to15hp preventor, bl_ 6 inch repair collar, bl_ 5 inch repair collar, bl_ 6 inch pvc collar, bl_ 5 inch pvc collar, bl_ 6 inch pvc pipe, bl_ 5 inch pvc pipe, bl_ 6 inch pvc elbow, bl_ 5 inch pvc elbow, bl_ 6 inch pvc pipe bend, bl_ 5 inch pvc pipe bend, bl_ 6 inch plain end, bl_ 6 inch pvc tee , bl_ 5 inch pvc tee , bl_ 6 inch mta, bl_ 5 inch mta, bl_ 6 inch fta, bl_ 5 inch fta, bl_ over tank gatevalve gm rod lathe threading charge and service, bl_ starter board wiring electrical service and fitting , bl_ hand pump lifting erection and service, bl_ motor lifing erection and service fitting , bl_ motor rewinding labour and workshop turning fitting charges , bl_ volt meter, bl_ shalk thrid, bl_ 1.2 mm rewinding copper wire, bl_ relay ltlk, bl_ 7.5hp preventor, bl_ pcv tape roll, bl_ 12 stage pump, bl_ 10 stage pump, bl_ no volt coil, bl_ mrf tape, bl_ indicator, bl_ 4sqmm 3core copper cable flat type, bl_ 63amps fuse unit, bl_ 100amps fuse unit, bl_ sada electrical panel board, bl_ dol electrical panel board, bl_ electrical contact kit, bl_ dol starter ltlk, bl_ dol starter m, bl_ 7 inch cassing pipe, bl_ contactor unit, bl_ 2.5 inch bore clamp, bl_ 2 inch bore clamp, bl_ amps meter, bl_ 2 inch gi pipe, bl_ x nipple, bl_ plunger rod 3 meter, bl_ nrv lather, bl_ m-12 boltnuts, bl_ impellers, bl_ gm lower valve, bl_ gm upper valve, bl_ 0.75 inch gi tap, bl_ 0.5 inch gi tap, bl_ 1.25 inch gi pipe, bl_ 1.25 inch gi collar long, bl_ mcb 4 pole, bl_ cylinder, bl_ borewell pedestal stand, bl_ borewell water tank, bl_ borewell head, bl_ borewell handle, bl_ bucket washer, bl_ stg bush, bl_ do bush, bl_ rotor bush, bl_ bolt nut 5by8 inch, bl_ bolt nut 3by8 inch, bl_ 7.5 hp motor pump with 12 stage, bl_ 6 hp motor pump with 10 stage, bl_ thrust bearing & bottom, bl_ solvent cement 250, bl_ solvent cement 50, bl_ solvent cement 100, bl_ stick & paper, bl_ 3 inch pvc mta & fta & end cap, bl_ 2.5 inch pvc mta & fta & end cap, bl_ 2 inch pvc mta & fta & end cap, bl_ 1.5 inch pvc mta & fta & end cap, bl_ 1.25 inch pvc mta & fta & end cap, bl_ 1 inch pvc mta & fta & end cap, bl_ 0.75 inch pvc mta & fta & end cap, bl_ 0.5 inch pvc mta & fta & end cap, bl_ 1.5 inch hdpe pipe, bl_ 1.25 inch hdpe pipe, bl_ hdpe end connector, bl_ gargen pipe 1 inch , bl_ gargen pipe 0.75 inch , bl_ 1 inch cpvc union and tank nipple, bl_ 0.75 inch cpvc union and tank nipple, bl_ cpvc gum 29ml, bl_ 1 inch cpvc ball valve, bl_ 0.75 inch cpvc ball valve, bl_ 3hp v4 sm motor pump 30stage, bl_ 2hp v4 sm motor pump 20stage, bl_ 4 inch pvc pipe collar, bl_ 3 inch pvc pipe collar, bl_ 2.5 inch pvc pipe collar, bl_ 2 inch pvc pipe collar, bl_ 1.5 inch pvc pipe collar, bl_ 1.25 inch pvc pipe collar, bl_ 1 inch pvc pipe collar, bl_ 3 inch pvc joint collar, bl_ 2.5 inch pvc joint collar, bl_ 2 inch pvc joint collar, bl_ 4 inch pvc ball valve, bl_ 3 inch pvc ball valve, bl_ 2.5 inch pvc ball valve, bl_ 2 inch pvc ball valve, bl_ 1.5 inch pvc ball valve, bl_ 1.25 inch pvc ball valve, bl_ 1 inch pvc ball valve, bl_ 0.75 inch pvc ball valve, bl_ 0.5 inch pvc ball valve, bl_ 1 inch cpvc pipe, bl_ 0.75 inch cpvc pipe, bl_ 1 inch cpvc tee, fta, mta, bl 0.75 inch cpvc tee, fta, mta, bl_ 1 inch cpvc elbow & collar, bl_ 0.75 inch cpvc elbow & collar, bl_ 0.75 inch pvc pipe collar, bl_ 0.5 inch pvc pipe collar, bl_ 4 inch pvc pipe, bl_ 3 inch pvc pipe, bl_ 2.5 inch pvc pipe, bl_ 2 inch pvc pipe, bl_ 1.5 inch pvc pipe, bl_ 1.25 inch pvc pipe, bl_ 1 inch pvc pipe, bl_ 0.75 inch pvc pipe, bl_ 0.5 inch pvc pipe, bl_ 4 inch pvc elbow, bl_ 3 inch pvc elbow, bl_ 2.5 inch pvc elbow, bl_ 2 inch pvc elbow, bl_ 1.5 inch pvc elbow, bl_ 1.25 inch pvc elbow, bl_ 1 inch pvc elbow, bl_ 0.75 inch pvc elbow, bl_ 0.5 inch pvc elbow, bl_ 2 inch gi pipe nipple 1mtr, bl_ 0.75 inch gi pipe nipple 1 feet, bl_ 0.5 inch gi pipe nipple 1 feet, bl_ 2.5 inch

CTN :45352214

08 Jun, 2026 178

Mandya - Karnataka

Tender For supply of water supply items to h malligere grama panchayath - hmm_ motor rewinding labour and workshop turning fitting charges , hmm_ motor lifing erection and service fitting , hmm_ hand pump lifting erection and service, hmm_ starter board wiring electrical service and fitting , hmm_ over tank gatevalve gm rod lathe threading charge and service, hmm_ 5 inch fta, hmm_ 6 inch fta, hmm_ 5 inch mta, hmm_ 6 inch mta, hmm_ 5 inch pvc tee , hmm_ 6 inch pvc tee , hmm_ 6 inch plain end, hmm_ 5 inch pvc pipe bend, hmm_ 6 inch pvc pipe bend, hmm_ 5 inch pvc elbow, hmm_ 6 inch pvc elbow, hmm_ 5 inch pvc pipe, hmm_ 6 inch pvc pipe, hmm_ 5 inch pvc collar, hmm_ 6 inch pvc collar, hmm_ 5 inch repair collar, hmm_ 6 inch repair collar, hmm_ 7.5hp to15hp preventor, hmm_ relay unit-motor, hmm_ 6 inch threaded end cap, hmm_ 2 inch gi pipe, hmm_ amps meter, hmm_ 2 inch bore clamp, hmm_ 2.5 inch bore clamp, hmm_ contactor unit, hmm_ 7 inch cassing pipe, hmm_ dol starter m, hmm_ dol starter ltlk, hmm_ electrical contact kit, hmm_ dol electrical panel board, hmm_ sada electrical panel board, hmm_ 100amps fuse unit, hmm_ 63amps fuse unit, hmm_ 4sqmm 3core copper cable flat type, hmm_ indicator, hmm_ mrf tape, hmm_ no volt coil, hmm_ 10 stage pump, hmm_ 12 stage pump, hmm_ pcv tape roll, hmm_ 7.5hp preventor, hmm_ relay ltlk, hmm_ 1.2 mm rewinding copper wire, hmm_ shalk thrid, hmm_ volt meter, hmm_ 6 hp motor pump with 10 stage, hmm_ 7.5 hp motor pump with 12 stage, hmm_ bolt nut 3by8 inch, hmm_ bolt nut 5by8 inch, hmm_ rotor bush, hmm_ do bush, hmm_ stg bush, hmm_ bucket washer, hmm_ borewell handle, hmm_ borewell head, hmm_ borewell water tank, hmm_ borewell pedestal stand, hmm_ cylinder, hmm_ mcb 4 pole, hmm_ 1.25 inch gi collar long, hmm_ 1.25 inch gi pipe, hmm_ 0.5 inch gi tap, hmm_ 0.75 inch gi tap, hmm_ gm upper valve, hmm_ gm lower valve, hmm_ impellers, hmm_ m-12 boltnuts, hmm_ nrv lather, hmm_ plunger rod 3 meter, hmm_ x nipple, hmm_ 2hp v4 sm motor pump 20stage, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 0.75 inch cpvc ball valve, hmm_ 1 inch cpvc ball valve, hmm_ cpvc gum 29ml, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ 1 inch cpvc union and tank nipple, hmm_ gargen pipe 0.75 inch , hmm_ gargen pipe 1 inch , hmm_ hdpe end connector, hmm_ 1.25 inch hdpe pipe, hmm_ 1.5 inch hdpe pipe, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 3 inch pvc mta & fta & end cap, hmm_ stick & paper, hmm_ solvent cement 100, hmm_ solvent cement 50, hmm_ solvent cement 250, hmm_ thrust bearing & bottom, hmm_ 0.75 inch cpvc elbow & collar, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc pipe, hmm_ 0.5 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 4 inch pvc ball valve, hmm_ 2 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 3 inch pvc joint collar, hmm_ 1 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 4 inch pvc pipe collar, hmm_ 2 inch gi non return valve, hmm_ 2.5 inch gi non return valve, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.5 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 4 inch pvc elbow, hmm_ 0.5 inch pvc pipe, hm

Central Government/Public Sector

CTN :45137374

08 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For platform shelter along with cc benches at various station in the jurisdiction of den/east in connection with conversion of bus type pf shelter

corporations/Associations/Others

CTN :44823009

16 Apr, 2026 3.09 Lacs

Multi City - Telangana

Tender For corrigendum : providing cc benchings for catchpits and box drain at various locations in moosarambagh,division-25, circle-6, crz, ghmc (moosarambagh circle-29) (as fy 2025-26) rs 3.80 lakhs

Cc Bench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others