Get complete information related to latest Cc Foundation Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cc Foundation Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cc Foundation Tenders.
Tender For corrigendum : 82645/e8 provn of station gym at af stn thanjavur - general summary (note : schedule a part i building/ structure is not pre priced by mes and the pre priced rate indicated as "rs. 0.00" under col.5 signifies this fact only. bidder shall insert their rate in green field under column 6), schedule a part i building/structures design and construction of rcc m-25 framed structure (single storey) with permanent specifications in rcc m-25 with brick masonry panel walls, att, pu based wpt, earthquake resistance as per latest is etc incl rccfoundation etc complete all as specified and as shown in architectural drawing / approved structural drawing.note:- the contractor shall submit structural design & drawing of the building under sch a part i (prepared based on architectural drawing forming part of tender document) duly vetted by any iit / nit or any govt engineering college within the time limit shown in schedule a notes., general summary (note : schedule a part ii to v are prepriced by mes under ser no. 04 to 07. bidders shall insert their lumpsum amount in the green coloured field under col-6 only), total of schedule a part ii internal electrification , total of schedule a part iii internal water supply", total of schedule a part iv road / hard standing", total of schedule a part v sewage disposal , sch a part- vi - miscellaneous items (note : this schedule is not pre priced by mes and the pre priced rate indicated as "rs. 0.00" under col.5 signifies this fact only. bidder shall insert their rate in green field under column 6), m&l for on site lldpe septic tank for 25 users capacity designed to carry sewage and sullage water, excavation in any type of soil, pcc 1:4:8 below foundation,vent shaft, connection etc., complete all as specified and as directed., m&l for soakage well 2.4m dia x 4.5 m effective depth with cover in any type of soil , foundation in pcc 1:3:6, walls of honey combed masonry with top ring of m25 concrete including intercepting chamber and screen chamber made of brick masonry in cememt mortar, rcc cover slab in m25 cover, interconnecting pipes of rcc/dwc complete filled with brick bats complete all as per ce af bangalore td drg no afb/td125 sheet no 1/2 and 2/2 and ce a&n zone drg no ce/td/2022/16 steet 1/1., s&f turbo force wall mounted fans complete with blades and accessories, 230 v, 450 mm sweep five star rated including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by engineer-in-charge.
Tender For supply foundation chemical, anchor bolts, carry out core drilling of foundation holes in concrete floor and anchoring the foundation bolt using chemical anchoring grout
Tender For cleaning of existing garland drains, cutting new garland drains, provision of concrete pipe culverts and pump foundation under monsoon preparation works of north urimari project, barka-sayal area.
Tender For earth work excavation pccm10 for foundation m25 concrete for abutment girder retains tmt fe 550 steel reinforcement and approach road etc.only for catogary-ii(a) communities only
Tender For supply, installation, testing and commissioning of 200 kva diesel engine alternator set at tebuilding vemana, ananapur sh providing c.c. foundation, earthing andother works
Tender For installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified
Tender For supply, installation, testing and commissioning (sitc) of 58.50 kva 3 phase silent diesel generator set comprising of suitable make engine developing suitable bhp coupled to suitable make alternator mounted on c.c. foundation
Tender For supply of supply, installation, testing, and commissioning of 125 kva diesel generator set as per the technical specification attached. duly dismantling the existing 50kva dg set for ers , supply and laying of 3.5 x 150 sqmm aluminium armoured cable with glands and termination for ers territory. , supply and laying of 3.5 x 95 sqmm aluminium armoured cable with glands and termination for ers territory. , earth pit with earth chamber, 2x2 copper plate with 1.5 inch dia with 2mtr long gi pipe b class and suitable size of trench, compound, termination, for ers territory. , supply and laying of 1.5 x 4 core ug cable for using ats function, for ers territory. , 25x3 swg copper strip for using earth conductor, for ers territory. , gsb generator switch board with 200 a mccb as incomer and 2nos 125a mccb as out going with suitable size of busbar and enclosure, for ers territory. , double compression gland for ers territory. , 16 sq.mm copper wire for ers territory. , 16 mm, 4 inch exhaust pipe extension with ms pipe for ers territory. , removal of existing amf panel and fixing of 2nos ats panel for ers territory. , supply of 100 amps ats panel for ers territory , existing dg foundation extension workfor ers territory. , electrical inspectorate scheme preparation, site inspection fee, testing, etc for ers territory. , supply of 15kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 25kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of 50 kva diesel generator 3 phase i o, including trasportation, loading and unloading for sbc , supply of materials for provision of concrete foundation for dg set as per site requirement for sbc , installation of concrete foundation for dg set as per site requirement for sbc , installation of dg set on the foundation for dg set for sbc , supply and termination of power cable on amf panel, dg sets and ac main distribution panel for dg set including trenching and laying as per site requirement for sbc , supplying and installation of earthing material for three pits for dg set for sbc
Tender For supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi - supply and installation of open gym equipment(s) under mlalads fund in different parks under municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), cross trainer /elliptical exerciserdimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using akzonobel/ berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg
Tender For laying of plain lime concrete, filling of sand in foundation trench, mending the broken pillars, roof beams and roof slabs, procurement of new sand stone blocks, resetting the removed structural members of kameshwaralaya