Latest cc platform Tenders | Government cc platform Tenders

State Government

CTN :43172741

23 Dec, 2025 5.54 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work providing and laying of cement concrete approach road platform around the mukkal burial shed at kottucherry (north) vp in kottucherry commune (3rd call) - hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charge for vibrator (needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, hire charges of diesel road roller 8 to 10 tonne, collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., hire charges flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of deharadun white lime, supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :43227875

31 Dec, 2025 8.48 Lacs

Vadodara - Gujarat

Tender For drilling of 125 mm dia. x 60 mts. deep bore by mdr rig and installation of i.m.ii hand pump and construction of c.c. platform as per unicef design & drawing with soak pit at diff. villages of taluka. vadodara, padara, karja, dabhoi, shinor, savli, desar & waghodiaof dist. vadodara under different programme

State Government

CTN :43228052

31 Dec, 2025 8.20 Lacs

Vadodara - Gujarat

Tender For drilling of 165 mm dia. x 90 mts. (casing pipe above 12 meters and up to 40 meters) deep bore by dth rig and installation of i.m.ii hand pump and construction of c.c. platform as per unicef design & drawing with soak pit at diff. villages of taluka. savli, desar & waghodiaof dist. vadodara under different programme

CTN :43239209

24 Dec, 2025 36.64 Lacs

Multi City - Telangana

Tender For construction of compound wall, cc platform, filling of gravel and laying of cc road for food street under mgf in nalgonda municipality

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

Central Government/Public Sector

CTN :43229400

09 Jan, 2026 NA

Jagadhri - Haryana

Tender For work of "security disc opening and dismounting of uic-130 ctrb in rb shop for qty. 24000 nos. for two years", "material movement per working day in rb shop and ctrb section by lister/platform truck for 600 days" & "bearing loading in truck/vehicle qty. 50000 nos. for two years" as per scope of work at c&w workshop, n. rly., jagadhri workshop.

State Government

CTN :42789428

22 Dec, 2025 36.05 Lacs

Anuppur - Madhya Pradesh

Tender For corrigendum : work contract for air water noise pollution monitoring at atps, chachai and coal loading and unloading platform at sangma siding sohagpur area dhanpuri.

Central Government/Public Sector

CTN :43061617

19 Dec, 2025 21.92 Lacs

Chandrapur - Maharashtra

Tender For corrigendum : repairing, painting and rcc platform work at loading office at ghugus siding of ghugus sub area of wani area.

CTN :43194549

30 Dec, 2025 NA

Karwar - Karnataka

Tender For dismantling of existing escalator of platform no.1 of madgaon railway station, packing, loading, transporting, shifting and unloading at 11kv sub station at madgaon.

CTN :43134127

24 Dec, 2025 61.55 Lacs

West Godavari - Andhra Pradesh

Tender For replacement of exiting asbestos roofing with gi profile sheet roofing over the godwon, loading platform and lowering of the loading platform level, repair and renewal works including replacement of north light glass panes, painting of auction platform, rejected godown, toilets,growers lounge,rest rooms, compound wall and miscellaneous civil works at tobacco board, devarapalli, west godavari district, andhra pradesh.

Cc Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector