Latest cells Tenders | Government cells Tenders

Central Government/Public Sector

CTN :40538203

09 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of valve regulated lead acid battery with m.s.rakes and connectors 110 v ,650 ah cap acity (1 set consisting of 56 cells) confirming to rdso spec no: rdso /pe/spec/ac/0009-2014 (rev-2). [ w arranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538188

07 Jul, 2025 NA

Hubli - Karnataka

Tender For supply of lead acid low maintenance secondary cells 2v 300 ah capacity 10 hr. rate of discharge at 27 c assembled in hard rubber or ppcp container with tubular positive and negative plates conforming to rdso spec.irs:s:88/2004. the cells shall be supplied with microporous vent plugs cum sealed floats intercell conn ectors nut bolts and washers. the cells to be supplied in dry and uncharged condition without tool kit as per specn. rdso spec.irs:s:88/2004 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538632

01 Jul, 2025 NA

Bengaluru - Karnataka

Tender For supply of lead acid cell, low maintenance, 2 volt in hard rubber(or transparent container, polypropylen e ppcp) container conforming to irs: s-88-2004 (with amdt. upto date if any). the cells should be complete with rubber boxes(or as per specification), tubular positive plates, pasted negative plates, acid level indicati ng floats inter-cell connector with bolts & nuts. the cells are required to be dry & uncharged. capacity of eac h cell will be 80/ah at 10 hrs. rate to discharge to 1.85 v per cell at 27 degree centigrade. [ warranty peri od: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40529335

12 Jun, 2025 NA

Dehradune - Uttarakhand

Tender For supply of 110v,120ah vrla smf battery set with 19 monoblock ( 6v each)/57 cells of 6 v precha rged as per spec. no. rdso/pe/spec/ ac/0009-2014, (rev-2) with inter cell connectors. packing instru ction - spi182 make: hbl or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40399682

03 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of load cells for ash brick plant at ntpc dadri

Central Government And Public Sector

CTN :40538474

30 Jun, 2025 NA

Nagpur - Maharashtra

Tender For supply of battery operated led based torch light cum flashing hand signal lamp as per rdso specification no. spn/195/20 08 rev-2.2 (with cells). [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40525965

27 Jun, 2025 6.50 Lacs

Alappuzha - Kerala

Tender For purchase of tools and miscellaneous - purchase of tools and miscellaneous, digital clamp meter meco 36 auto40/400 amp ac/dc meter, nitrile safety glovesmedium size 100 pairs, ss screw star head1/2", ss screw star head1", battery terminal protectorspray/gel, aluminium ladder heavy6 feet a type, air blower 650w, dry wall screw3/4", dry wall screw1", chain block0.5 ton, chain block1 ton, chain block2 ton, chain block5 ton, industrial pedal fanalmonard, oxygen regulator with back fire arrestor, acetiline regulatorwith back fire arrestor, battery charge analyser, power hammer, hydrolic press havy110-130 ton

CTN :40494496

02 Jun, 2025 NA

Tiruvallur - Tamil Nadu

Tender For bid to ras supply of lithium - ion cells and batteries for portable application (rechargeable batteries) as per is 16047 / iec 61960 (q3)

CTN :40423805

05 Jun, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter

CTN :40310571

06 Jun, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of portable sealed rechargeable single cells - nickel - metal hydride (rechargeable batteries) as per is 16048, 16046 (q3)

Cells Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government