Latest cement concrete stone Tenders | Government cement concrete stone Tenders

CTN :45057523

12 May, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold and ambuja and ultratech and acc and jk and dalmia under job no 2355 as per list att , coarse sand free from vegetation , coarse aggregate 40mm graded , aggregate 20mm , stone boulder 9 to 12 , water proofing compounding confirming to is 2645 2003

CTN :45063793

12 May, 2026 NA

Shimla - Himachal Pradesh

Tender For supply of supply and stacking of stone aggregate 40 dash 26 point 40 mm , supply and stacking of stone aggregate 20 mm , supply and stacking of stone aggregate 13 point 20 mm , supply and stacking of stone aggregate 10 mm , supply and stacking of stone aggregate 6 point 70 mm , supply and stacking of coarse river sand

CTN :45057902

22 May, 2026 8.00 Lacs

Udhamsign Nagar - Uttarakhand

Tender For supply of a4 size paper , white board marker , pencil sharpener 04 pcs , pencil packet of 10 black , highlighter pen , stapler pin 9.3 mm width , stapler pin 7.1 mm width , sketch pen , flip chart sheet , xerox tonner hp 137a , register 100 pages , cello tape medium , cello tape coloured- 04 colours , file cover for 21.5 cm x34.5 cm , all pin , information folder , stick note page marker , mfr participant book , cssr participant , plastic folder , xerox tonner refilling , latex rubber gloves , face shield barrier device for cpr , face mask , disposable paper cup , batteries aa size , oxygen cylinders refilling , refilling of fire extinguisher , dust mask , ear plugs , spray paint fluorescent , 2.5 inch peni nails , 4 inch peni nails , cement , 10 to 20 mm steel bar mix , 8 mm steel bar sariya , binding wire , crushed stone aggregate 20 mm , crushed stone aggregate 10 mm , coarse sand , bricks , plywood 13 mm thick 4x4 feet , metal sheet 6 mm 4x4 feet , aqueous fill foaming foam 0.5 ltr , concrete slab 4x4 feet , cgi sheet 12x4 feet , fuller earth , poly bag , poly sheet roll , bleaching powder

CTN :44846125

04 May, 2026 1.23 Crore

Kargil - Jammu And Kashmir

Tender For bid to ras supply of construction materials d d - stone metal 22 pt 40 mm , stone chips 11 pt 20 mm , stone chips 6 pt 7 mm , coarse sand , stone dust

CTN :44856806

04 May, 2026 1.75 Crore

Kargil - Jammu And Kashmir

Tender For bid to ras supply of stone boulder , stone metal 40 mm , coarse sand

CTN :44875786

05 May, 2026 NA

Dehradun - Uttarakhand

Tender For bid to ras supply of stone metal 40 mm , stone chips 20 mm , stone chips 13pt2 mm , stone chips 10 mm , stone chips 6pt7 mm , coarse sand

CTN :44875789

05 May, 2026 NA

Dehradun - Uttarakhand

Tender For bid to ras supply of stone aggregate and fine aggregate : : - stone metal 63 mm downwards as per atc , stone metal 45 mm downwards as per atc , stone metal 40 mm downwards as per atc , stone metal 26pt5 mm downwards as per atc , stone chips 20 mm downwards as per atc , stone chips 13pt2 mm downwards as per atc , stone chips 10 mm downwards as per atc , stone chips 6pt7 mm downwards as per atc , coarse sand as per atc

CTN :44938228

04 May, 2026 NA

Jalpaiguri - West Bengal

Tender For bid to ras supply of gun pit with ohp e e - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 x 4 feet 18mm bwr grade , prefabricated mild steel door of size 3000mm x 2400mm outer frame made out of isa 50x50x6mm , pre-fabricated mild steel door of size 1500mm x 1830mm outer frame made out of isa 50x50x6mm , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film , deck sheet curved shape 1.20mm , quick setting compound , water proofing compound in 1 kg , fire resistance paint for internal surface. , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces as specified. , red oxide primer. , bitumen 80 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher , supply solar lantern model no ms122 , lightening conductor , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm. , hdpe hose pipe 25mm dia , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc or opc 53 grade in poly bag of 50 kg each , sand coarse , stone aggregate coarse 20 mm , stone aggregate coarse 40 mm , hesco basket of size 1.232m x 0.616m x 1.06m , transparent pipe 5mm dia bore for water leveling best quality , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms , plaster trowel with wooden handle isi marked. , fish line best quality. , plumb bob iron best quality. , galvanised iron pan mortar , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge , painting brush 100 mm best quality. , synthetic tarpaulin 550 gsm , multipurpose non slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props or scaffolding , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

corporations/Associations/Others

CTN :45034145

20 May, 2026 43.16 Lacs

Jhansi - Uttar Pradesh

Tender For providing of construction of drain for 2x210 mw ash water recirculation system at ptpp, parichha. - engaging jcb on hire bases including hire fuel driver helper etc. complete. , clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. , demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of material within 50 metres lead as per direction of engineer-in-charge in lime mortar , earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. , providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) , "centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform" , steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars , random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : cement mortar 1:6 (1 cement : 6 coarse sand) , brick work with fly ash (non modular) bricks of class designation 7.5 in foundation and plinth incement mortar 1:6 (1 cement : 6 coarse sand) , 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) , supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. , "hire charges of pump set of capacity 4000 litres/hour for dewatering which include cost of services of operating staff, cost of lubricating oil, diesel / petrol/ kerosene oil , other consumables for running the plant and machinery. the hire charges of plant machinery on per day basis are for single shift of eight working hours." , providing and laying non pressure np-4 class (heavy duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 900 mm dia rcc pipes.

Cement Concrete Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others