Latest cement block scrap Tenders | Government cement block scrap Tenders

State Government

CTN :45042068

11 May, 2026 4.60 Lacs

Churu - Rajasthan

Tender For dental department in instrument and consumable item - x/o extraction forceps set, surgical bur (micrometer), spoon excavetor, preiosteal elevator, pedo extraction forcep hae, moon probe, long surgical bur for airtor, filling instrument set, extraction forceps set, elevator set, dental disposable suction tips, artery forcep straight (small), 7 twezzer, 6 mouth mirror handle, 5 cement carrier, 19 small scissor, 18 needle holder curved (small), 17 needle holder straight (small), 16 artery forcep curved (small), 11 cement condensor, 10 probe explorer

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

CTN :44966098

06 May, 2026 280

Channarayapatna - Karnataka

Tender For procurement of water supply pvc,upvc,cpvc materials and pump motor materials for the year of 2026-27 - volatage meter, prevender, pump motor 20hp 50 stage, pump and motore 10hp 50 stage, motor for open well 1 hp, motor and pump 7.5hp 15stage, motor 5hp 10stage pump, end connection for hdpe- iso certified, hdpe pipe 1.25 inch 20 gauge- iso certified, hdpe pipe 1.5 inch 20 gauge - iso certified, gi thread end cap 0.5 inches- iso certified, gi pipe 0.75 inches with thread- iso certified, gi coller 2 inches- iso certified, gi coller 0.75 inches- iso certified, gi elbow 0.75 inches- iso certified, gi elbow 0.5 inches- iso certified, gi tee 0.75 inches- iso certified, gi tee 0.5 inches- iso certified, gi union 3 inches- iso certified, gi union 2 inches- iso certified, gi union 2.5 inches- iso certified, motor 5.5 hp 50stage pump, motor auto starter, amphere meter, pump and motor auto starter, gi union 2 inches- iso certified, gi tap 0.75 inches- iso certified, gi tap 0.5 inches- iso certified, gi gate wall 2.5 inches- iso certified, gi gate wall 2 inches- iso certified, brass gate wall 2.5 inches- iso certified, brass gate wall 2 inches- iso certified, solvent cement gum- iso certified, gi 2 nrv- iso certified, gi elbow 0.5 inch- iso certified, gi collar 0.5 inch- iso certified, gi nipple feet 2 feet 0.5 inch- iso certified, gi nipple feet 1 feet 0.5 inch- iso certified, gi elbow 0.75inch- iso certified, gi collar 0.75 inch- iso certified, gi nipple 0.75 2feet - iso certified, gi nipple 0.75 1feet - iso certified, gi nipple feet 2 inch- iso certified, gi bend 2 inch- iso certified, axcel blades- iso certified, sealent 100ml - iso certified, gi collar 2 inch - iso certified, gi clamp set bore cap, complete panel board items, gi pipe 2 inches class b , alluminium wires 20sq.mm - iso certified, alluminium wires 16sq.mm - iso certified, alluminium wires 12sq.mm - iso certified, alluminium wires 10sq.mm - iso certified, alluminium wires 6sq.mm - iso certified, panel board - iso certified, starter 20hp - meco, starter 17.5hp - meco, starter 15hp - meco, starter 7.5hp - meco, starter 5hp - meco, submersible cabel 10sq 3 core , submersible cabel 6sq 3 core , submersible cabel 4sq 3 core , motor and pump 25hp 40 stage pump, motor and pump10hp 20 stage, motor and pump 17.5 hp 36stage, motor and pump 20hp 40 stage, motor and pump 15hp 30 stage , motor and pump7.5hp 56 stage, motor and pump 5hp 50 stage , motor and pump 12.5hp 25 stage, item name - hdpe pipes (pe100-pn6.0) 63mm dia conforming to is 4984-2016, item name - ef reducer coupler 90mm x75mm, item name - ef reducer coupler 75mm x63mm, item name - elctro fusion elbow 125mm, item name - elctro fusion elbow 110mm, item name - elctro fusion elbow 90mm, item name - elctro fusion elbow 75mm, item name - elctro fusion elbow 63mm, item name - elctro fusion coupler 125mm, item name - elctro fusion coupler 110mm, item name - elctro fusion coupler 90mm, item name - elctro fusion coupler 75mm, item name - elctro fusion coupler 63mm, item name - ef reducer coupler 125mmx110mm, item name - ef reducer coupler 110mmx90mm, item name - ef reducer coupler 90mmx75mm, item name - ef reducer coupler 63mmx50mm, item name - road cutting machine, item name - ppr fusing machine, item name - electro fusion machine, item name - hdpe mta 20mm, item name - hdpe mta 90mm, item name - hdpe mta 75mm, item name - hdpe mta 63mm, item name - ms flang 2.5inch, item name - 50mm dia air valve, item name - elctro fusion tee 125mm, item name - elctro fusion tee 110mm, item name - elctro fusion tee 90mm, item name - elctro fusion tee 75mm, item name - elctro fusion tee 63mm, item name - hdpe flange 20mm, item name - hdpe flange 90mm, item name - hdpe flange 75mm, item name - hdpe flange 63mm, item name - hdpe pipes (pe80-pn6.0) 20mm dia conforming to is 4984-2017, item name - hdpe pipes (pe80-pn6.0) 90mm dia conforming to is 4984-2016, item name - hdpe pipes (pe100-pn6.0) 75mm dia conforming to is 4984-2016, item name-cpvc gum

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

CTN :45015163

15 May, 2026 11.86 Lacs

Ongole - Andhra Pradesh

Tender For auction sale of plot - dr. b.r. ambedkar konaseema district, mamidikuduru sub-registry, mamidikuduru mandalam, nagaram gram panchayat area, nagaram village, r.s.no. 26-5 an extent of 451.82 square site in whichitem no:1 an extent of 176.4 square yards site with r.c.c building bearing door no. 1-21 bounded by:east: site of jalem ambedkar and others – 38’.00”south : site of jalem prakash – 42.’00”west : site of jalem prakash – 37’.6”\north :site of jalem nagaveni and item no. 2 42’.00”item no. 2: an extent of 39.33 square yards passage bounded by:east: site of jalem ambedkar and others – 59’000”south : site of item no.1 – 6’00”west: site of jalem nagaveni – 59’.00”north : panchayat cement road – 6’.00”with all easementary rights there inmaking a total of item no.1 and ii an extent of 215.73 square of site.

Central Government/Public Sector

CTN :44992680

15 May, 2026 36.71 Lacs

Imphal - Manipur

Tender For supply of refer soq item no. 1a. supply of lt power cable of 1.1 kv grade of following size...a. 3.5 x 120 sqmm. , refer soq item no. 1b. supply of lt power cable of 1.1 kv grade of following size...b. 3.5 x 70 sqmm. , refer soq item no. 1c. supply of lt power cable of 1.1 kv grade of following size...c. 4 x 25 sqmm. , refer soq item no. 2a. supply of high-density polyethylene hdpe pipe...a. 40 mm dia , refer soq item no. 2b. supply of high-density polyethylene hdpe pipe...b. 63 mm dia , refer soq item no. 3a. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...a. up to 35 sqmm , refer soq item no. 3b. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...b. above 35sqmm and up to 95 sqmm , refer soq item no. 3c. laying of one number pvc insulated and pvc sheathed, xlpe power cable of 1.1 kv grade...c. above 95 sqmm and up to 185 sqmm , refer soq item no. 4. demolishing cement concrete or bituminous road or paver block roads by manually or mechanical means...as per direction of engineer-in-charge. , refer soq item no. 5. providing and laying in position cement concrete 1-2-4, 1 cement, 2 coarse sand, 4 graded stone aggregate 20 mm nominal size...etc. as required. , refer soq item no. 6a. supply and making end termination with compression brass gland and aluminium lugs...a. 4c x 25 sqmm. , refer soq item no. 6b. supply and making end termination with compression brass gland and aluminium lugs...b. 3.5c x 70 sqmm. , refer soq item no. 6c. supply and making end termination with compression brass gland and aluminium lugs...c. 3.5c x 120 sqmm. , refer soq item no. 7a. providing, laying and fixing following dia g.i. pipe medium class in ground complete...a. 40 mm , refer soq item no. 8. design, manufacture, supply, installation, testing and commissioning of outdoor type double door lt panel....160a 4 pole fp, 35 ka mccb with thermal magnetic release - 3 nos. , refer soq item no. 9. supply, installation, testing and commissioning of weather proof suitable size sub feeder panel..outgoing, 63a 4 pole, 25 ka mccb with thermal magnetic release - 6 nos. , refer soq item no. 10. supply of led street light 45 w 6500 lumens, min. cri greater than or equal to 70...pc cover as per the technical specification. , refer soq item no. 11. supply of 6 mtr high gi octagonal continuously tapered galvanised street light pole...keselec, model-valmont or equivalent. , refer soq item no. 12. erection of metallic pole of item no. 11 in cement concrete...including excavation and refilling etc. as required. , refer soq item no. 13. itc of prewired, outdoor led fittings of all types complete with accessories...complete as required. , refer soq item no. 14. sitc of pre-fabricated outdoor type 3-phase street lighting panel...and brick foundation for erecting the ms frame etc. as required. , refer soq item no. 15a. supplying and laying of following size dwc or hdpe pipe...complete as required. a. 40 mm dia , refer soq item no. 15b. supplying and laying of following size dwc or hdpe pipe...complete as required. b. 63 mm dia , refer soq item no. 16. earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories...with charcoal or coke and salt as required. , refer soq item no. 17. providing, laying and fixing 80 mm dia g.i. pipe, medium class...re-positioning same with pcc. , refer soq item no. 18. providing and fixing 6 swg dia g.i. wire on surface or in recess...as required. //bid details 2 / 23

corporations/Associations/Others

CTN :44975546

29 Apr, 2026 1.51 Lacs

Multi City - Telangana

Tender For supply andinstallation of round cement pots at rajeev gruhakalpa, papireddy coln at serilingampally circle-49, slpz cmc during the year 2025-26 (item.3)

corporations/Associations/Others

CTN :44964121

28 Apr, 2026 53.2 Thousand

Multi City - Telangana

Tender For supply and fixing of cement benches at mallikarjuna nagar park in serilingampally circle-49, slpz, cmc during the year 2025-26 (item.2)

Central Government/Public Sector

CTN :44912954

23 Apr, 2026 NA

Yamunanagar - Haryana

Tender For supply of glass ionomer cement light cure[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]