Latest cement concrete block Tenders | Government cement concrete block Tenders

CTN :45411641

10 Jun, 2026 NA

Mehsana - Gujarat

Tender For tender for supply of cement concrete block for himmatnagar division

CTN :45402368

11 Jun, 2026 24.01 Lacs

Sujangarh - Rajasthan

Tender For 4 civil work in gp kuri- construction of an 80mm interlocking cement concrete block road: from keshar dev meghwal's house towards gularam meghwal's house (bamaniya), installation of tiles at the prayer ground of the government girls' senior secondary school, khudi, installation of 80mm interlocking cement concrete blocks at the public cremation ground (beed johad), khudi, construction of an 80mm interlocking cement concrete block road: from in front of bhagirath bhamu's house towards jagdish bhamu's house (khudi)

CTN :45400974

11 Jun, 2026 24.01 Lacs

Churu - Rajasthan

Tender For interlocking cement concrete block 80 mm road construction work from keshar dev meghwal's house to gularam meghwal's house and vamaniya tiling work at the prayer hall of government girls higher secondary school, khudi work of laying interlocking cement concrete blocks 80 mm at the communal cremation ground, beed johad khudi interlocking cement concrete block 80 mm road construction work from in front of bhagirath bhamu's house towards jagdish bhamu's house

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

Central Government/Public Sector

CTN :45371767

18 Jun, 2026 NA

Ferozepur - Punjab

Tender For certain b/r repair to plumbing sanitary items pvc doors and other allied works in various md accn in area of age b/r ii of ge (west) ferozepur - demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed., dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed., demolition of brick work built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed., taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., m&l for taking down existing stop valve / bib cock 15 mm bore by replacing head/washer/spindle/cap etc and refixing the same complete all as specified and directed., m&l for taking down existing low level flushing cistern and refixing after replacing the syphon, ball valve with washer and flush handle complete all as directed., demoletion and breaking up drain pipes 110 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, demoletion and breaking up drain pipes 75 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed., m&l for brick work built in cement mortar (1:6) with sub class b old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed., s&f 50mmx47mm size solid pvc door frame made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified shown on drawing and specified and directed., s&f factory made 30mm thick (style) solid panel pvc door shutter consisting of frame made out of ms tubes for top & bottom rails, ms frame covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 b.2.1 of mes schedule part-ii (2004) complete all as specified shown on drawing and specified and directed., s&f ptmt tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed., s&f ptmt butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed., s&f ptmt handle 150mm long fixed with steel screws complete all as specified and directed., m&l for 25mm thick plain cement concrete (1:2:4) type b-0 using 12.5 mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed., m&l for 10 mm thick (square/ rectangular) light shade vitrified tiles coloured, premium quality, joint-free, area of eac

State Government

CTN :45361249

05 Jun, 2026 NA

Shillong - Meghalaya

Tender For construction of road from lower kalaichar to namat gram by laying of interlocking cement concrete block (l = o.so km)

CTN :45340023

10 Jun, 2026 178

Mandya - Karnataka

Tender For water supply items - bl_ 6 inch threaded end cap, bl_ relay unit-motor, bl_ 7.5hp to15hp preventor, bl_ 6 inch repair collar, bl_ 5 inch repair collar, bl_ 6 inch pvc collar, bl_ 5 inch pvc collar, bl_ 6 inch pvc pipe, bl_ 5 inch pvc pipe, bl_ 6 inch pvc elbow, bl_ 5 inch pvc elbow, bl_ 6 inch pvc pipe bend, bl_ 5 inch pvc pipe bend, bl_ 6 inch plain end, bl_ 6 inch pvc tee , bl_ 5 inch pvc tee , bl_ 6 inch mta, bl_ 5 inch mta, bl_ 6 inch fta, bl_ 5 inch fta, bl_ over tank gatevalve gm rod lathe threading charge and service, bl_ starter board wiring electrical service and fitting , bl_ hand pump lifting erection and service, bl_ motor lifing erection and service fitting , bl_ motor rewinding labour and workshop turning fitting charges , bl_ volt meter, bl_ shalk thrid, bl_ 1.2 mm rewinding copper wire, bl_ relay ltlk, bl_ 7.5hp preventor, bl_ pcv tape roll, bl_ 12 stage pump, bl_ 10 stage pump, bl_ no volt coil, bl_ mrf tape, bl_ indicator, bl_ 4sqmm 3core copper cable flat type, bl_ 63amps fuse unit, bl_ 100amps fuse unit, bl_ sada electrical panel board, bl_ dol electrical panel board, bl_ electrical contact kit, bl_ dol starter ltlk, bl_ dol starter m, bl_ 7 inch cassing pipe, bl_ contactor unit, bl_ 2.5 inch bore clamp, bl_ 2 inch bore clamp, bl_ amps meter, bl_ 2 inch gi pipe, bl_ x nipple, bl_ plunger rod 3 meter, bl_ nrv lather, bl_ m-12 boltnuts, bl_ impellers, bl_ gm lower valve, bl_ gm upper valve, bl_ 0.75 inch gi tap, bl_ 0.5 inch gi tap, bl_ 1.25 inch gi pipe, bl_ 1.25 inch gi collar long, bl_ mcb 4 pole, bl_ cylinder, bl_ borewell pedestal stand, bl_ borewell water tank, bl_ borewell head, bl_ borewell handle, bl_ bucket washer, bl_ stg bush, bl_ do bush, bl_ rotor bush, bl_ bolt nut 5by8 inch, bl_ bolt nut 3by8 inch, bl_ 7.5 hp motor pump with 12 stage, bl_ 6 hp motor pump with 10 stage, bl_ thrust bearing & bottom, bl_ solvent cement 250, bl_ solvent cement 50, bl_ solvent cement 100, bl_ stick & paper, bl_ 3 inch pvc mta & fta & end cap, bl_ 2.5 inch pvc mta & fta & end cap, bl_ 2 inch pvc mta & fta & end cap, bl_ 1.5 inch pvc mta & fta & end cap, bl_ 1.25 inch pvc mta & fta & end cap, bl_ 1 inch pvc mta & fta & end cap, bl_ 0.75 inch pvc mta & fta & end cap, bl_ 0.5 inch pvc mta & fta & end cap, bl_ 1.5 inch hdpe pipe, bl_ 1.25 inch hdpe pipe, bl_ hdpe end connector, bl_ gargen pipe 1 inch , bl_ gargen pipe 0.75 inch , bl_ 1 inch cpvc union and tank nipple, bl_ 0.75 inch cpvc union and tank nipple, bl_ cpvc gum 29ml, bl_ 1 inch cpvc ball valve, bl_ 0.75 inch cpvc ball valve, bl_ 3hp v4 sm motor pump 30stage, bl_ 2hp v4 sm motor pump 20stage, bl_ 4 inch pvc pipe collar, bl_ 3 inch pvc pipe collar, bl_ 2.5 inch pvc pipe collar, bl_ 2 inch pvc pipe collar, bl_ 1.5 inch pvc pipe collar, bl_ 1.25 inch pvc pipe collar, bl_ 1 inch pvc pipe collar, bl_ 3 inch pvc joint collar, bl_ 2.5 inch pvc joint collar, bl_ 2 inch pvc joint collar, bl_ 4 inch pvc ball valve, bl_ 3 inch pvc ball valve, bl_ 2.5 inch pvc ball valve, bl_ 2 inch pvc ball valve, bl_ 1.5 inch pvc ball valve, bl_ 1.25 inch pvc ball valve, bl_ 1 inch pvc ball valve, bl_ 0.75 inch pvc ball valve, bl_ 0.5 inch pvc ball valve, bl_ 1 inch cpvc pipe, bl_ 0.75 inch cpvc pipe, bl_ 1 inch cpvc tee, fta, mta, bl 0.75 inch cpvc tee, fta, mta, bl_ 1 inch cpvc elbow & collar, bl_ 0.75 inch cpvc elbow & collar, bl_ 0.75 inch pvc pipe collar, bl_ 0.5 inch pvc pipe collar, bl_ 4 inch pvc pipe, bl_ 3 inch pvc pipe, bl_ 2.5 inch pvc pipe, bl_ 2 inch pvc pipe, bl_ 1.5 inch pvc pipe, bl_ 1.25 inch pvc pipe, bl_ 1 inch pvc pipe, bl_ 0.75 inch pvc pipe, bl_ 0.5 inch pvc pipe, bl_ 4 inch pvc elbow, bl_ 3 inch pvc elbow, bl_ 2.5 inch pvc elbow, bl_ 2 inch pvc elbow, bl_ 1.5 inch pvc elbow, bl_ 1.25 inch pvc elbow, bl_ 1 inch pvc elbow, bl_ 0.75 inch pvc elbow, bl_ 0.5 inch pvc elbow, bl_ 2 inch gi pipe nipple 1mtr, bl_ 0.75 inch gi pipe nipple 1 feet, bl_ 0.5 inch gi pipe nipple 1 feet, bl_ 2.5 inch

CTN :45352214

08 Jun, 2026 178

Mandya - Karnataka

Tender For supply of water supply items to h malligere grama panchayath - hmm_ motor rewinding labour and workshop turning fitting charges , hmm_ motor lifing erection and service fitting , hmm_ hand pump lifting erection and service, hmm_ starter board wiring electrical service and fitting , hmm_ over tank gatevalve gm rod lathe threading charge and service, hmm_ 5 inch fta, hmm_ 6 inch fta, hmm_ 5 inch mta, hmm_ 6 inch mta, hmm_ 5 inch pvc tee , hmm_ 6 inch pvc tee , hmm_ 6 inch plain end, hmm_ 5 inch pvc pipe bend, hmm_ 6 inch pvc pipe bend, hmm_ 5 inch pvc elbow, hmm_ 6 inch pvc elbow, hmm_ 5 inch pvc pipe, hmm_ 6 inch pvc pipe, hmm_ 5 inch pvc collar, hmm_ 6 inch pvc collar, hmm_ 5 inch repair collar, hmm_ 6 inch repair collar, hmm_ 7.5hp to15hp preventor, hmm_ relay unit-motor, hmm_ 6 inch threaded end cap, hmm_ 2 inch gi pipe, hmm_ amps meter, hmm_ 2 inch bore clamp, hmm_ 2.5 inch bore clamp, hmm_ contactor unit, hmm_ 7 inch cassing pipe, hmm_ dol starter m, hmm_ dol starter ltlk, hmm_ electrical contact kit, hmm_ dol electrical panel board, hmm_ sada electrical panel board, hmm_ 100amps fuse unit, hmm_ 63amps fuse unit, hmm_ 4sqmm 3core copper cable flat type, hmm_ indicator, hmm_ mrf tape, hmm_ no volt coil, hmm_ 10 stage pump, hmm_ 12 stage pump, hmm_ pcv tape roll, hmm_ 7.5hp preventor, hmm_ relay ltlk, hmm_ 1.2 mm rewinding copper wire, hmm_ shalk thrid, hmm_ volt meter, hmm_ 6 hp motor pump with 10 stage, hmm_ 7.5 hp motor pump with 12 stage, hmm_ bolt nut 3by8 inch, hmm_ bolt nut 5by8 inch, hmm_ rotor bush, hmm_ do bush, hmm_ stg bush, hmm_ bucket washer, hmm_ borewell handle, hmm_ borewell head, hmm_ borewell water tank, hmm_ borewell pedestal stand, hmm_ cylinder, hmm_ mcb 4 pole, hmm_ 1.25 inch gi collar long, hmm_ 1.25 inch gi pipe, hmm_ 0.5 inch gi tap, hmm_ 0.75 inch gi tap, hmm_ gm upper valve, hmm_ gm lower valve, hmm_ impellers, hmm_ m-12 boltnuts, hmm_ nrv lather, hmm_ plunger rod 3 meter, hmm_ x nipple, hmm_ 2hp v4 sm motor pump 20stage, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 0.75 inch cpvc ball valve, hmm_ 1 inch cpvc ball valve, hmm_ cpvc gum 29ml, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ 1 inch cpvc union and tank nipple, hmm_ gargen pipe 0.75 inch , hmm_ gargen pipe 1 inch , hmm_ hdpe end connector, hmm_ 1.25 inch hdpe pipe, hmm_ 1.5 inch hdpe pipe, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 3 inch pvc mta & fta & end cap, hmm_ stick & paper, hmm_ solvent cement 100, hmm_ solvent cement 50, hmm_ solvent cement 250, hmm_ thrust bearing & bottom, hmm_ 0.75 inch cpvc elbow & collar, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc pipe, hmm_ 0.5 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 4 inch pvc ball valve, hmm_ 2 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 3 inch pvc joint collar, hmm_ 1 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 4 inch pvc pipe collar, hmm_ 2 inch gi non return valve, hmm_ 2.5 inch gi non return valve, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.5 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 4 inch pvc elbow, hmm_ 0.5 inch pvc pipe, hm

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Cement Concrete Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others