Latest cement concrete paving Tenders | Government cement concrete paving Tenders

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

corporations/Associations/Others

CTN :40490157

30 May, 2025 4.13 Lacs

Multi City - Telangana

Tender For laying of sw drain with 300mm dia np2 class pipe line and ss flooring inside jamia masjid, darulshifa in pathergatti div -32, cir-9, crz, ghmc (reserved for all st individuals/ proprietorship firms/partner ship firms) (recall) (a.s fy 2025)

Corporations / Associations / Others

CTN :40477006

07 Jul, 2025 89.82 Lacs

Hebbagodi - Karnataka

Tender For supplying and laying of epoxy flooring applying of pu paint and fixing of of ss hannd rail work in rbl and pit wheel lathe at hebbagodi depot

CTN :40505685

04 Jun, 2025 56.27 Lacs

Multi City - Telangana

Tender For husnabad municipality balance work for construction of new municipal office building near mpdo office granite flooring, ss railing, gypboard false ceiling etc

CTN :40426073

23 Jun, 2025 30.00 Lacs

Birsinghpur - Madhya Pradesh

Tender For supply of lok nirman samagri for f.y. 2025-26 - stone 6x6x6 inch with labour & material, stone 6x6x6, brick local, brick chimney, plaster work 12mm with labour & material, plaster work 15mm with labour & material, soak pit in plastic tank 250 liter with labour & material complete, sand(khajuraho), sand(son), brickwork local with labour & material, brickwork chimney with labour & material, brickwork flyash with labour & material, crusher dust providing & laying, coarse aggrigate, binding wire, iron angle, centering providing & fixing, cement ppc, cement opc, lime hydrated, lime powder, distemper work 2 coat with labour & material, lime whitewash work 2 coat with labour & material, putty work with labour & material, primer work with labour & material, muroom providing & laying, gsb providing & laying, crm providing & laying, dlc providing & laying, hard soil providing & laying, loose soil providing & laying, black cotton soil, backhoe loader rent, concrete mixture, hume pipe 300mm providing &laying, hume pipe 400mm providing &laying, hume pipe 500mm providing &laying, hume pipe 600mm providing &laying, hume pipe 900mm providing &laying, cement brick, cement brick providing, cement pipe 3 inch, cement pipe 4 inch, plastic pipe 3 inch, plastic pipe 4 inch, tmt steel bar, white cement, ss work in 304 grade steel providing & fixing, profile sheet 12x3 sqft, ac sheet 12x4 sqft, fiber sheet 12x4 sqft, painting labour work only, gi sheet 12x4 sqft, aluminitum section work 18 gauge providing & fixing, aluminitum section work 16 gauge providing & fixing, fencing wire, welding work, tyre/tube puncher repairing, pcc m15 concrete work providing & laying, pcc m20 concrete work providing & laying, pcc m10 concrete work providing & laying, flag stone 2 inch thick, flag stone 3 inch thick, sand stone 40mm with labour material, kota stone 25 mm with labour & material, glass molded 12mm, iron girder all size, wall art painting with labour & material, wall at painting only labour work, pre cast cement boundry wall 6 feet height, star flex printing with frame, normal flex printing with frame, star flex printing without frame, normal flex printing without frame, led digital screen in rent 12 x 8 feet size with operator, plastic flexibal sheet, sepration membrane 125 micron thickness, acp sheet work with labour & material, ss mesh, granite work (south) providing & laying, granite work (rajasthan) providing & laying, granite molding work, double charged tiles providing & laying, ceremic tiles providng & laying, wall tiles providing & laying, led wall panel p7, retro 3m board 3mm, sun pack board, glow shine board 100 mm thickness with backlit complete, redium printing complete, iron pole, it flooring providing & laying, diamond carpet grass providing & laying, planted grass providing & laying, jcb road roller rent, plastic planter 14 inch dia, cement planter 14 inch dia, planter bottom tray 12inch dia, signage board selfie point (i love kotar) complete with base 12 x 4 sqft, twin bin 80 l, double pole with name plate open type dustbin, cr iron material with stand ,cover and fitting complete, twin bin 70 l, double pole with name plate open type dustbin,16x16x24 inch stainless steel material,19.200 kg (mss745) (steel) with stand ,cover and fitting complete, twin bin 100 l, double polw with name plate open type dustbin,plastic material with stand ,cover and fitting complete company make neelkamal,astro,cello

CTN :40078036

24 May, 2025 NA

Chamoli - Uttarakhand

Tender For bid to ras supply of up gradataion of vip room - door handle , door stoper , sliding bolt , tower bolt , door eye , bathroom mixer , toilet paper holder , health fouct , box type european seat , cp jali , towel rail , towel ring , mirror shelves , wash basin with pedestal , celling fan , led ceiling circular light , wall bracket light fancy , bed light , chandelier set , modular switch , modular socket , modular fan regulator socket type , modular socket , mirror led light , geyser , exhaust fan , modular indicator light , modular bell switch , air conditioner split type with stabilizer , pvc waste pipe , bathroom shower , mirror , teak wooden flooring vitrified tile , 2_5 sq mm wire , 1_5 sq mm wire , s s curtain rod , bracket and holder for ss curtain , soap holder , door lock double side bid number/ & ( * ) : gem/2025/b/6152817 dated/ + : 21-04-2025 bid document/ 3 3 1 / 35

CTN :40431847

05 Jun, 2025 26.45 Lacs

Multi City - Andhra Pradesh

Tender For providing electrical supply and fixing windows to new municipal office building in piduguralla municipality under special grant any government/general funds - 1 flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. 2 flooring with non - skid red or white full body ceramic floor tiles of size 600 x 600 mm and thickness between 8 - 10 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete. 3 providing skirting to internal walls to 15cm height/risers of steps with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x600mm and thickness between 8-9mm 1st quality set over base coat of cm (1:5) 12mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work, 4 dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300mm and thickness 6mm 1st quality set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete. 5 providing impervious coat to exposed rcc roof slab surface with c.m.(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including charges all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junction of wall and slab etc, complete for finished item of work as per s.s. 6 supplying and fixing of unplasticised poly vinyl chloride (upvc) sliding windows three track -two glass shutters sliding and one mesh shutter duly manufactured using upvc reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with tpv gaskets/ epdm weathering seal resistant accessories like locking system 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work. 7 supply,delivery and labour charges for fixing of 48" (1200mm) cei

Central Government/Public Sector

CTN :40434732

14 Jun, 2025 40.00 Lacs

Kishangarh - Rajasthan

Tender For supply of lab furniture of central instrumentation facility, central university of rajasthan - wall mount cabinets with metal door, sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing., under bench storage units (qty as per drawing)sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth movebase cabinet of 600 mm with 1 drawer & 2 shutter with lockbase cabinet 750mm with 1 drawer & 2 shutter with lockbase cabinet 900w 1 drawer & 1 shutter with lockbase cabinet 450mm 1 drawer & 1 shutter with lock, modular sink unit ( corner unit )specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet., filler panels (qty as per drawing)specification of material of construction is same as under cabinets., frame assembly for wall cabinet bench (qty as per drawing)material:steel tubing, of hollow sections conforming to standards is code:square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. .legs:adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm., 17mm (+/-1) thick black granite (qty as per drawing), garment locker1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock., shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe., hardware fittingsa) hinges :- hettich/haffele/godrej.b) handle :- ss304 matt finish d handle / aluminium flush handle.c) screw :- all s.s. 304 visible screws.d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides 45kgs

State Government

CTN :40440907

28 May, 2025 NA

Nashik - Maharashtra

Tender For construction cement concrete paving internal village road at taharabad tal.baglan dist.nashik

Central Government / Public Sector

CTN :40441016

05 Jun, 2025 1.11 Crore

Haldia - West Bengal

Tender For custom bid for services - 9040c25b52 annual repair contract for process scheme jobs in instrumentation department on open tender basis- equipment hiring charges - 1 hydra 10t (hired) 4640, 2 hydra 15t (iocl owned) 4944, 3 hydra 25t (hired) 5551, 4 crane 50t (hired) 10785, 5 crane 75t (hired) 10785, 6 forklift ( iocl owned) 1738, 7 180t crane (hired) 18296, 8 articulated boom (hired) 2208, 9 tractor and trailer (hired) 2076, supply of materials for secured advance- civil items: a. items against which secured advance can be granted :, 1. bricks, 2. stone and brick aggregates, 3. stones, 4. finished products of brass, iron or steel such as doors and window frames,, wiremesh, gate, gi sheets., 5. pre-cast rcc products such as pipes & fittings, jail, water storage tanks., 6. doors and windows fittings., 7. pipes and sanitary fittings of gi, ci, sci and hci., 8. metallic doors / windows., 9. ms gratings., 10. reinforcement bars., 11. hydraulic door closers., 12. structural steel., 13. flushing cisterns., 14. ci valves, sluice gates etc., 15. fencing materials chain-link / barbed-wire etc., 16. anchor bolts., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. kitchen sink china vitreous, flush back for wash basin vitreous china water closet, and pedestal type water closet vitreous china, urinals., 2. glazed tiles, terrazo tiles and similar articles., 3. marble slabs., 4. asbestos cement products., 5. finished timber products such as doors, windows, flush doors, particle boards, (subject to the mandatory tests being satisfactory)., 6. bitumen in sealed drums., 7. bitumen felt., 8. polythene pipes & fittings, sanitary fittings and pipes of sw, porcelain and, chinaware materials., 9. laminated / safety one way vision and bullet proof glasses., 10. chemicals required for anti-termite treatment (in sealed drums)., 11. paints, varnishes, distempers, pigment, spirit., 12. cement tiles., 13. acid proof tiles., 14. bitumen products required for mastic flooring etc., 15. water proofing compound such as cico etc., 16. materials for epoxy finishing etc., electrical items, a. items against which secured advance can be granted :, 1. steel conduit, 2. gi pipes, 3. ci boxes, 4. ic boards., 5. switchgears (air circuit breakers and air break switches), 6. a c s r conductors, 7. a.c. plant & machinery., 8. pumps, 9. generating sets (without oil), 10. gi strips., 11. street light poles (steel), 12. cable trays., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. transformers, 2. switch gears ( oil filled), 3. lt & ht cables, 4. fans, 5. store & dry batteries, 6. insulation tapes., 7. epoxy cable compounds., 8. electric light fittings., 9. wood battens, casing & capping and wooden boards., 10. flexible wires., 11. pvc materials, 12. rubber materials, 13. glass wools, thermocol and other insulating materials., 14. porcelain ht and lt insulators., 15. electric heat tracing tapes., mechanical items, a. items against which secured advance can be granted :, 1. structural steel., 2. plates., 3. pumps / motors, vessels etc., diesel engine, side entry mixers, suction heaters &, any other mechanical equipment., 4. refractory bricks., 5. ss foil., 6. pipes / pipe fittings., 7. gratings., 8. valves, hydrants, monitors., 9. aluminium sheet., b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. bitumen, 2. wrapping & coating material, 3. primer / paint, 4. foam / foam seal material, 5. guniting material, 6. insulation & refractory materials other than bricks., instrumentation items, a. items against which secured advance can be granted :, 1. structural steel, 2. ms sheet / gi sheet, 3. pre-fabricated trays, 4. pipes / tubes / fittings, b. items against which secured advance can be granted, obtaining insurance over them from the contractor:, 1. ss / copper tube

Cement Concrete Paving Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Corporations / Associations / Others

Central Government/Public Sector

State Government

Central Government / Public Sector