Latest cement concrete pipe laying Tenders | Government cement concrete pipe laying Tenders

State Government

CTN :40022354

21 Apr, 2025 34.48 Lacs

Palakkad - Kerala

Tender For amrut-2.0 - cherpulasseri-gap filling and extra work for laying 90mm pvc pipe, excavation work for laying 450mm di pipe (prohibited blasting) and gi, ms , road restoration work (lsgd) at cherpulasseri municipality

State Government

CTN :39996366

06 May, 2025 3.45 Crore

Kanchrapara - West Bengal

Tender For supply, storage, installation, commissioning and trial run of electro-mechanical equipment at raw water and clear water pumping station under kanchrapara municipality. - for rwps, supply, delivery , storage, installation, testing & commissioning of vertical turbine type centrifugal pump with cashion pipe ,column assembly, discharge head, sole plate, motor stool and all other accessories all complete of 750m /hr discharge at a head of 29 mtr at duty point as per technical specification . maximum allowable speed of pump shall be 1000 rpm., supply, delivery , storage, installation, testing & commissioning of vertical, scim ,tfec, 110 kw (minimum), 415 v 10% , 50hz 05%, speed 1000 rpm (syn) , to vertical pump duty motor to match with pump at sl no- (1) complete with coupling hub and all other accessories as per specification., supply, delivery , storage and installation at site of ms pipes, specials, joints, flanges as per specification and technical offer. (for both individual pump delivery pipe and extended part of common manifold if required) ., supply, delivery and installation and commissioning of valves complete at site with fixture as per specification and technical offer & as follows :-, di butterfly valve for delivery side of pump fitted with electrical actuator suitable for local and control desk operation and display system for the individual pump delivery pipe line. (350 mm minimum))(pn 16 type), di non-return valve for individual pump delivery pipe line. (350 mm. minimum))(pn 16 type), supply, delivery at site and storage of m.s. dismantling joint assembly for the individual pump delivery pipe line as per specification (350 mm minimum)., supply, delivery ,storage and installation at site of pressure gauges complete with fittings and fixture as per specification, pressure gauge for delivery side (0 10 kg / cm2), supply, delivery ,storage and installation at site of pressure transmitter complete with fitting and fixture as per specification as follows:-, pressure transmitter for delivery side ( 0 10 kg / cm2 ), supply, delivery at site and installation of m.s. structural materials for cable tray / rack, panel installation supports, pipes & valves supports, fabricated stairs & all other fabrication work., lt panel, modification / retrofitting/expansion/addition of the existing pmcc with supply , delivery & installation of a new additional motor starter feeder at rwph in order to accomodate the extra pump-motor feeder of requisite rating not less than 110 kw .the modification/addition should match/synchonise the existing panel and should ensure smooth operation of the complete panel as a single entity and should be fit to install at the existing pump house., retrofitting of existing control desk at site with supply,wiring, installation of additional items like temparature scanner , multifunction meter , microprocessor based position indicator, digital pressure indicator,tnc switch, push button switch, indication lamps etc .as required to complete for the new pump motor set., supply ,delivery, laying, installation of power cable of adequate size from motor feeder to motor .(min. 2 run x 3core , 185 sq mm xlpe armoured al. for each feeder), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to motor space heater . (min. 3 core 2.5sq mm. armoured cu for each motor), supply ,delivery, laying, installation of power cable of adequate size and length from pmcc to valve actuator etc. elsewhere required. (min . 4 core 2.5 sq mm. armoured cu), making end termination of all the power cables as stated in sl no 11,12,13 with all necessary equipments like termination kits(dry type), lugs , glands etc , installed for the modification job., supply ,delivery, laying, installation of control cables of different size as required for the purpose and length for completing the different control connections between control desk, motor feeders , lpbs, pmcc etc.to the satisfaction o

State Government

CTN :39855018

25 Apr, 2025 27.48 Lacs

Burdwan - West Bengal

Tender For corrigendum : supply and installation of electrical fixtures and gadgets in bolpur ib at bolpur under burdwan zone in west bengal. - supply & delivery of 3 phase 415v fixed speed cassette type air-conditioner machine having cooling capacity not less than 14100w, eer 2.7 to 3.2, noise level not more than 56db. this cassette type air conditioning machine should be fitted with scroll compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (make-o-general /mitsubishi electric/mitshubishi heavy industries as per approved by eic/authority)., supply & delivery of 240v split air-conditioner machine having cooling capacity not less than 6875 w, isser 3.8 to 4.39, bee rating not less than 3 star, noise level not more than 46db. this split air conditioning machine should be fitted with rotary compressors, lcd remote & all other accessories suitable for refrigerant-r32/r410a. (o-general /mitsubishi electric /mitshubishi heavy industries as per approved by eic/authority)., installation, testing & commissioning of the above-said split ac outdoor unit on existing iron structure and indoor unit on wall & mending good the damages as per direction of e.i.c., installation, testing & commissioning of the above-said split ac outdoor unit by fixing iron angle unit on wall & mending good the damages as per direction of e.i.c., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 3/8"(for discharge) 1.15mm thickness copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & installation of extra add-on items- hvac grade 1/2"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above ac machine as per direction of eic., supply & laying of 4core 2.5sq.mm 1.1 kv insulation grade sheathed cu cable with gas line as per direction of eic for making interconnection/communication between indoor to outdoor unit of split type ac m/c.(make- havells/finolex/polycab as approved by e.i.c), supply and laying 5/8(20mm) heavy type pvc pipe for water drainage., supplying, fabrication & fixing of iron stand of m.s. angle size (40 mm x 40mmx6mm) for installation of outdoor unit of 4.0 tr split ac incl. drilling 2 nos holes in each angle and horizontal angle angle 40 mm x40mm x 6 mm in each stand. each stand will be properly fixing by supporting angle (25x25x5mm) and flushnut on peripheral wall as per machine configuration & load with adequate service access as per direction of eic, supplying and fixing 415 v four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection (a) 160 amp fp mccb (make legrand/crabtree/siemens/l&t/ abb as approved by e.i.c) [d-8/10], supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection (make legrand/crabtree/siemens/l&t/abb as approved by e.i.c) [d-6/7] (a) 6-32 amp tp mcb, distribution wiring in 1.1 kv single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in 20mm size pvc rigid conduit fr (precision make) incl. necy. fittings as required[e-14] i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ecc [e-14/ 1(a)(iii)], s & f 3phase 9-15a , 415 v dol starter (make-l & t ,cat no. ss94351 or equivalent model of abb/siemens as per dierction of e.i.c) to be fixed on wall with all fixing accessories complete as

Central Government And Public Sector

CTN :40025231

06 May, 2025 5.09 Lacs

Jodhpur - Rajasthan

Tender For supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying of 0.63mm thick gss sheet , supplying of 0.80mm thick gss sheet , supplying of 1.00mm thick gss sheet , sitc of gi volume control damper , supplying and fixing of powder coated extruded aluminium return air grills with louvers , supplying and fixing of 4x16 sqmm power cable , supplying and fixing of control cable of 3x2,5sqmm , sitc of 40mm upvc pipe , sitc of 20mm upvc pipe , sitc ms cable tray 100mm width x 50mm x 1.6mm thickness , sitc ms cable tray 150mm width x 50mm x 1.6mm thickness , sitc of gi strip for loop earthing , dismantling and removing the existing laid old power or control cables , dismantling the existing old package units , recovering the existing laid refrigerant piping of old defective , dismantling the existing old ducts of package units , transportation of the existing fitted old dissmantled package a.c. units , itc of 7 tr sensible high precision ac package unit , supplying and charging of the referigerant gas r-407 , supply and fixing liquid line filter drier , supply and fixing of size 1-1 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 7 by 8 inch and 18 gauge copper referigerant pipe , supply and fixing of size 5 by 8 inch and 18 gauge copper referigerant pipe , laying of 1-1 by 8 inch recovered copper referigent pipe , laying of 7 by 8 inch recovered copper referigent pipe , laying of 5 by 8 inch recovered copper referigent pipe , providing ms structure for outdoor or indoor units , itc of 100mm width x 50mm x 1.6mm , itc of 150mm width x 50mm x 1.6mm , itc of old recovered 4x10 sqmm cable , itc of old recovered 4x1.5 sqmm cable , laying of existing 25 mm x 5 mm thick g.i. strip bid number/ & ( * ) : gem/2025/b/6140065 dated/ + : 15-04-2025 bid document/ 3 3 1 / 29

Central Government/Public Sector

CTN :40025422

12 May, 2025 NA

Bangalore - Karnataka

Tender For supply of supply of networking item - 1 inch hdpe pipe , supply of 12 core multimode outdoor armoured fiber , supply of 24 core multimode outdoor armoured fiber , supply of fully loaded liu pigtails , supply of jpu fully loaded , 24 port cat 6 utp jackpanel , supply of cat 6 single information outlets with backbox and shuttered face plate commscope , supply of cat 6 dual information outlets with backbox and shuttered face plate commscope , supply of cat 6 shield metal field keystone jack commscope amp molex systimax panduit , supply of cat 6 shield metal field rj45 plug commscope amp molex systimax panduit , supply of cat 6 utp patch cord 1 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 2 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 3 meter red green commscope amp molex systimax panduit , supply of modular concealed gi metal box , supply of 1 inch pvc flexible pipe with accessories , supply of 1.5 inch pvc flexible pipe with accessories , supply of 2 inch pvc flexible pipe with accessories , supply of cat 6 utp cale box 305 meter commscope amp molex systimax panduit , supply of 1 inch conduit pipe , supply of 1.5 inch conduit pipe , supply of 1 inch casing and cappinng , supply of 1.5 inch casing and cappinng , supply of 2 inch casing and cappinng , supply of 2 inch gi pipe , supply of 1 inch ms pipe , supply of 6 2 inch raceway casing white , supply of 4 2 inch pvc casing white , supply of 2 2 inch pvc casing white , supply of 9 u wall rack with pdu and accessories , supply of 15 u wall rack with pdu and accessories , supply of 27 u floor mounting rack 800x800 with pdu and accessories , ofc laying with hdpe pipe with digging soft soil and refilling 3 feet x 1 feet approx , ofc laying with hdpe pipe with clamping required material clamping nail etc .should be provided by the vendor 3 feet x 1 feet approx , ofc laying with hdpe pipe through hdd , consruction supply and installation of cement chambers with covers 2.5ftx2.5ftx2.5ft , supply and fixing of ofc route markers stone , installation of liu , splicing and testing of pigtails , installation of utp jack pannel , laying of utp cable per meter , groove cutting in walls floors and fixing pvc 1 1.5 inch pipes , groove cutting in walls floors and fixing of modular concealated gi metal box metal box covering them , termination of i o box and fixing of face plate , laying of 1in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1 incasing and cappinng required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in gi pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 6 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 4 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 2 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , ofc outdoor 12core splicing kit with necessary consumables and enclosure , ofc otdr test per core bid details/ 2 / 43 charges with report , network and server support deploying of 5 service engineers

State Government

CTN :39996342

05 May, 2025 NA

Asansol - West Bengal

Tender For supplying and laying of di pipe and ms pipe for clear water rising main pipeline under amrut 1.0 (phase iv) within asansol municipal corporation

State Government

CTN :39928604

25 Apr, 2025 24.70 Lacs

Parganas - West Bengal

Tender For construction of 4 (four) nos pipe carrying structures including laying of 150mm dia m.s. distribution pipe at node point 71-101 (27.50mtr), 100mm m.s. distribution pipe at node point 107-111 (44.00mtr) and 80mm m.s. distribution pipe at node point

State Government

CTN :39991295

24 Apr, 2025 5.71 Crore

Bangalore - Karnataka

Tender For supply, laying, jointing, testing and commissioning of 610mm dia ms gravity main for 1800m length alternate to the existing 600mm dia psc pipe at kodithimmanahalli junction for koratagere town & madhugiri at tumakuru district (2nd call).

CTN :40008835

30 Apr, 2025 21.99 Lacs

Bathinda - Punjab

Tender For providing laying and thrusting of ms pipe 600mm id for providing and laying 400mm id di k-9 and all other works contigent thereto at bathinda

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

Cement Concrete Pipe Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors