Web Analytics Made Easy - StatCounter

Cement Gun Tenders

Get complete information related to latest Cement Gun Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cement Gun Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cement Gun Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :44991942 Due date: 04 Jun, 202604 Jun, 2026 30.73 Lacs
Tender For corrigendum : providing of testing service for on-board /commissioned equipment/ instrument related to plant - ndt, radiological, structural stability test along with non destructive testing of departmental hemms of bharatpur ocp and ndt testing along with pressure testing..

Central Government/Public Sector

CTN :45348145 Due date: 06 Jun, 202606 Jun, 2026 NA
Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - radiological; diagnostic radiology qa testing; any other government approved labs /service providers

CTN :45315777 Due date: 15 Jun, 202615 Jun, 2026 5.00 Crore
Tender For supply of different items for treatment of patients in different departments under m-aay, cm-nnry and rghs. rate contract for 2 years- sterile hypodermic syringe with needle attached, 24 g, single use-2ml, sterile disposable perfusion set (infusion set) with airway and needle (paediatric use) , surgical spirit ip(500ml), surgical spirit ip(100ml), umbilical cord clamp, paper adhesive plaster 3inch 9.0 mts (with cutter) non woven, non allergic and strong adhesive but gentle to skin should conform to the standards and test as per is and bp standard, absorbable surgical (synthetic) antibacterial with sterilised needled suture (braided coated polyglaction/polyglycolic acid violet) size 2/0% circle round bodied 30 mm suture length 90mm, absorbable surgical (synthetic) antibacterial with sterilised needled suture (braided coated polyglaction/polygiycolic acid violet)size 3/02 circle round bodied 20mm suture length 70mm, polypropylene nonabsorable synthetic surgical mesh 7.6 cm 15 cm or 7.5cm*15 cm, polypropylene nonabsorable synthetic surgical mesh 15 cm 15 cm, paper adhesive plaster 2inch 9.0 mts (with cutter) non woven, non allergic and strong adhesive but gentle to skin should conform to the standards and test as per is and bp standard, rubber examination gloves size medium, endotracheal tube cuff size:-8, endotracheal tube cuff size 8.5, pop bandage 6", pop bandage 4", gloves size 6 inch, powder free (disposable sterile surgical rubber gloves), gloves size 6.5 inch, powder free (disposable sterile surgical rubber gloves), gloves size 7 inch, powder free (disposable sterile surgical rubber gloves), gloves size 7.5 inch, powder free (disposable sterile surgical rubber gloves), gloves size 6 inch, powdered (disposable sterile surgical rubber gloves), gloves size 6.5inch, powdered (disposable sterile surgical rubber gloves), gloves size 7 inch, powdered (disposable sterile surgical rubber gloves), gloves size 7.5 inch, powdered (disposable sterile surgical rubber gloves), abdominal drain kit, sterile having drainage catheter and collection bag (2000ml) (size 32), 3way stop cock with extension tube (vein-o extension line)size 150cm(non pyrogenic & single use), feeding tube no. 14, feding tube no. 12,, ligating clip 300 (for laproscopic use), polydiaxanone 2-0 rb, polydiaxanone 3-0 rb, polyurethin gestroduodenal tub, radio opac with guide wire and fixation tape, silk reel 3-0, skin stapler, transpore 3", absorbable surgical suture, braided coated polyglactin 910 violet) size 3/0 % circle round bodied 30 mm suture length 70cm, absorbable surgical suture, braided coated polyglactin 910 violet) size 3/0 3/8 curved rc 26 mm suture length 70cm, shoulder immobilizer, pelvic binder size-s, pelvic binder size-m, pelvic binder size-l, pelvic binder size-xl, pelvic binder size-xxl, ankle binder size- s, ankle binder size- m, ankle binder size-l, feracrylum 1% w/v, feracrylum 3% cotton gauge impreganated, feracrylum 3% w/w centburibine hcl 0.5 %, abdominal drain kit no. sterile having drainage catheter and collecting bag (2000ml) (size-20), iv infusion set with luerlock & y side, male to male connector, mold (position and fixsation device), iv infusion set with airvent (20 drop/ml), pvc suction tubing, 12.5mm, transparent film dressing, transducer dom with flusing device, vaccume suction drain 18, powered intra-luminal staplers with curved shaft anvil detachable 29 mm, 3 row staple line with adjustable staple height (1.0-2.5mm), longer staple leg 5.5mm-non slip grip surface, bone cement 20 gm with disposable sterile cement gun/syringe kit with low/high viscosity, passport cannula silicon 6, passport cannula silicon 8, radiofrequency probe compatible with mitech system (disposable), shaver burr various diametres compatible with mitech system (disposable), shaver burr various diametres compatible with storez (disposable), shaver burr various diametres compatible with striker (disposable), suture lasso l/r suture passer, radial nerve palsy

Central Government And Public Sector

CTN :45114292 Due date: 27 May, 202627 May, 2026 1.50 Lacs
Tender For corrigendum : providing of testing service for on-board /commissioned equipment/ instrument related to plant - mechanical, radiological; performance/durability/ safety test; statutory safety inspection and integrity assessment of air receiver

CTN :45143992 Due date: 21 May, 202621 May, 2026 1.66 Lacs
Tender For corrigendum : procurement supply of flood fighting materials as well as exectn during monsoon 2026 from jhulanpur paschimpara to jhulanpur boro masjid area of titidanga jurankandi ebmkt on the left bank of river bramhani in ps blk nabagram dist msd 3rd call - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete(capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or gates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028 cum/ bag, extra rate for item no above for each additional lead of 60 metre or part thereof beyond the initial lead of 30 metre., dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts, cutting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge., supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete., labour charges for dumping and placing in position properly filled in nylon crates with filled in gunny / poly cement bags (minimum 25 nos. having capacity 50 kg) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the engineer in charge.nb:- volume of each earth/ sand filled bags should not be less than0.028 m3. size of nylon crate is 1metre x 1metre x 1metre.(a) where boats are not necessary., supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (dia. to be measured at mid length)., driving bamboo pins in standing or flowing water including scaffolding and driving appliances. i) where boats are not necessary., supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.)

CTN :45203217 Due date: 25 May, 202625 May, 2026 8.69 Lacs
Tender For procurement of material and jungle cutting work for the embankment mashaldighi-mariakundu, kuriadaha and kanchanbeel including 4 no,s sluice (mathamora, dighirdanra,kuriadha-iii and mashaldighi-i) p.s and block-gazole, dist-malda for the year 2026-27 - supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg)., labour charges for filling empty cement gunny bag / polythene bag(capacity 50 kg) with all kinds of earth (wet or dry), sand oragreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within alead of 30 metre as per direction of engr-in-charge (cost is excluding the cost of any types of filling materials).nb:- volume of earth/ sand filled bags should not be less than 0.028cum/ bag., dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts., earthwork in excavation in all kinds of soil for making embank-ments, repairs to the embank-ment, closing breaches etc. as per profile inclu-ding supply and transporting the earth by truck or tractor or any othermechanical means on land , including loading, transporting, unloadingand stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the engineer-in-charge within a lead of, nb :- measurement to be taken on the basis of stack measurement / prepostwork section measurement after deduction of void as per norms.noextra payment will be made for stacking.a) beyond 500 metre and upto 1.00 km, supplying nylon cage netting 1 metre x 1 metre x 1 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete., removing earth/sand filled poly bags/gunny bags from the channelbed/slope and initially depositing the same near channel bank ata place as directed by the engineer-in charge for measurement of bag. & then disposing off the same at a distance not less than 150metre from the channel site., mazdoor ( male / female), earth work in excavation in the canals/drainage channels/ borrow pits/river bed/slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per of the engineer in charge.a) ordinary soil/local soil/soil mixed with moorum or kankar/silt, dry or moist/slushy silt/sticky soil., painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) on timber or plastered surface :(ii) two coats (white in shade), cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by engineer-in-charge.

Central Government/Public Sector

CTN :45139664 Due date: 21 May, 202621 May, 2026 NA
Tender For corrigendum : providing of calibration services - radiological calibration; radiation dose calibration; nabl labs, any other government approved labs / service provider, aerb; lab

Central Government / Public Sector

CTN :45209911 Due date: 22 May, 202622 May, 2026 NA
Tender For supply of hq_med_sur_(ph no. : 42173) thr implants cemented type with instrumentation and cement gun and cement ]

CTN :43831080 Due date: 18 May, 202618 May, 2026 61.87 Lacs
Tender For bid to ras bid to ras corrigendum : supply of proximal tibial lateral periarticular locking plate system lt and rt , proximal medial tibial locking plate system left or right , precontoured pelvic reconstruction plate , precontoured pelvic infrapectineal reconstruction plate , precontoured pelvic suprapectineal reconstruction plate , precontoured pelvic quadrilateral surface reconstruction plate , precontoured pelvic reconstruction locking plate , spring plate for pelvic fracture fixation 3 pnt 5 mm stainless steel , pelvis reconstruction plate 3 pnt 5 mm stainless steel , distal radius volar locking plate complete construct with 6 locking , tibial nailing system expert type titanium tibial nail 1 nos size 8 , short proximal femoral nail left or right titanium , interlocking humeral nail cannulated for humerus complete titanium , clavicular hook plate lcp complete construct with 03 cortical screws , short proximal femoral nail antirotation left or right complete titanium , titanium elastic nail with end cap , synthetic bone graft wedges sterile packed pnt , ao type joint spanning external fixator complete set with 04 x250 mm long ss , paediatric rail fixator system rail 150 mm long screws 4 pnt 5 , rail fixator adult with 400 mm rail 03x mounted locks complete set pnt , ao type external fixator set femur stainless steel tube 11 mm tube clamps pnt , mono rail external limb reconstruction system lrs compatible allen key , cemented modular bipolar hip prosthesis with colarless polished femoral stem , reverse shoulder replacement system uncemented ha porous sizes pnt , cement gun syringe sterile disposable , uncemented modular radial head prosthesis with modular radial head , cemented modular radial head prosthesis with modular radial head , cannulated tibial nails fractures of proximal distal third tibia bolts , proximal humerus anatomical locking plate complete titanium , proximal humerus anatomical locking plate complete 6 locking stainless steel , ao type external fixator set tibia consisting of 2 x 300 mm stainless steel //bid details2 / 29

Central Government And Public Sector

CTN :45179778 Due date: 02 Jun, 202602 Jun, 2026 NA
Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - radiography testing of weld joints of equipments & pipelines at kknpp 1&2 on call basis, ndt, radiological; radiography testing facility, as per scope of work; as per..
 Loading, Please wait...

Connect us via What's Up