Latest cement injection pump Tenders | Government cement injection pump Tenders

CTN :45660885

03 Jul, 2026 1.17 Lacs

Bardhaman - West Bengal

Tender For dismantling, transportation, unloading and assembling of 01no bg-825 motor grader, sl no- 25108 from kunustoria area to nakrakonda kumardih b ocp, bankola area.

CTN :45539280

26 Jun, 2026 2.47 Lacs

Godda - Jharkhand

Tender For corrigendum : repairing of 24 twenty four nos 06 sets wornout cutting edges float for bg825 motor grader of rajmahal project

CTN :45620299

02 Jul, 2026 NA

Doiwala - Uttarakhand

Tender For tender for cleaning equipment - heavy duty flexible shaft with double round inner core complete with guard coupling and hand piece having double ball bearing and oil seal for use in 42 mm id brass tubes., size of shaft 16 mm x 8 mtr long, size of shaft 16 mm x 10 mtr long, size of shaft 18 mm x 8 mtr long, size of shaft 18 mm x 10 mtr long, inner core nipple for 16mm shaft, innner core nipple for 18mm shaft, hand piece (16mm shaft), hand piece (18mm shaft), motor adopter for above shaft, inner core for (16mm ), inner core for (18mm ), t.e. type tools head cutter with 15 cutter (12 straight and 3 bevelled) for use with flexible shaft having bsp thread and suitable for 42 mm id brass/ss tube. the tool head cutter will be made of best quality steel material duly hardened and tempered for longer service., spare for above te type tool head cutter size 42 mm, spare pin, spare straight cutter, spare spring, spare bevelled cutter, spare hinge, spare washer, turk head brush made of genuine round spring steel wire 28/29 swg for use with flexible shaft having 1 /2 bsp thread suitable for the tube., 42 mm i.d. tube, 98 mm i.d. tube, scrapper of spring steel suitable for tube cleaning of 98 mm i.d. brass tube, steel wire dusting brush of round spring steel wire provided with wooden handle size 6 x 2 , steel wire brush size 6 x 2 for sugar grader having round spring steel wire, sugar bag trolley complete with polymer wheel (heavy duty) size 10 x 2 x1 and trolley made of steel suitable for carryng 100 kg sugar bag., polymer trolley wheel for sugar trolley size 10 x 2 x 1 , flexible shaft machine mounted on 3 wheel m.s. trolley with carrying handle, 5.00 h.p.ac motor,tefc, 2900 rpm, with cover complete with push button (dol) starter & with 2 mtrs. cts cable, complete with adopters and direct coupled to motor shaft, complete in respects suitable to use with 1 /2 bsp thread flexible shaft, tool head cutter complete with 3 cutters for cleaning of brass tubes size 98 mm id with flexible shaft having 1 /2 bsp thread, brass nozzles monarch for emico-kcp make vacuum filter, brass nozzles for kcp make sd/cfg, machine, bag marking brush oval shape, pad type boring tool hand cutter size 38mm

Central Government/Public Sector

CTN :45620035

04 Jul, 2026 NA

Surguja - Chhattisgarh

Tender For providing of customized annual maintenance contract/cmc for pre-owned products - annual maintenance contract (annual maintenance contract) for replacement of 1204 sqft operator cabin glasses of 08 nos equipment (water sprinkler- 03 nos, bd 155 dozer- 02 nos, motor grader-01 no, be300lc hyd backhoe-01 no, rhi..

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45577969

26 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For providing of custom bid for services - hiring of one motor grader and one vibro roller for monsoon preparedness and strengthening of coal evacuation route under cbcmp

Central Government/Public Sector

CTN :45356581

19 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For corrigendum : supply of motor grader min. 250hp engine capacity

corporations/Associations/Others

CTN :45522568

26 Jun, 2026 NA

Kolkata - West Bengal

Tender For auction sale of 01 x jcb 3dx super,01 x mechanical mine layer,01 x cr tr d80 a12 size ii dozer,01 x wheel dozer,01 x tata jd 315 se,01 x wheel dozer & 01 x motor grader,01 x size iv dozer,01 x jcb 3dx,02 x size iv dozer & 01 x air compressor,01 x mml,02 x size iv dozer

Central Government/Public Sector

CTN :45481861

18 Jun, 2026 25.0 Thousand

Kanhan - Maharashtra

Tender For replacement of engine of bg825 motor grader sl.no-25198

CTN :45499744

24 Jun, 2026 27.12 Lacs

Ongole - Andhra Pradesh

Tender For providing developmental works in torragudipadu g.p of chimakurthy mandal package 5 works - scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4. mord , construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 mord , construction of sub grade with quarry waste(table 400.13) by mix in place method normal construction of granular sub base by providing quarry waste material spreading in uniform layers with motor graded on prepared surfce mixing by mix in place method with rotavator at once and compacting with vibratory roller 80-100 kn r to achive the desired density complete as per clause 401.4 as per technical specification clause 408 mord , construction of granular sub-base by providing well graded hbg material (grading iii material) (table 400.2) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller 80-100 kn / vibratory roller to achieve the desired density, complete as per technical specification clause 402 mord including cost of all materials, labour, conveyance, hire charges of machinary, royalties, all taxes etc complete as per direction of engineer in charge.1 , including over head but excluding seignorage charges and gst desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. desired density, complete as per technical specification clause 401 mord / morth. but excluding vat & seigniorage charges. , clearing juliflora (prosafis) jungle including up-rooting and removing of juliflora stumps. etc complete. ssr from road & bridge works rates of materials & work items ..112(d) of current ssr (2025-26). mat-00482

Cement Injection Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector