Latest cement pipe scrap Tenders | Government cement pipe scrap Tenders

State Government

CTN :45397974

11 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all lift, dewaterin

CTN :45417262

10 Jun, 2026 NA

Guwahati - Assam

Tender For procurement of goods, equipment terrestrial lidar with integrated automatic total station 1" (arc seconds) angular accuracy , resistivity imaging system for 2d electrical resistivity survey , automatic weather station , thermal infrared camera , portable air quality monitoring system , walkie-talkie communication , flexural strength test of tiles , abrasion test of tiles , aggregate polishing , desiccator (vacuum) , motor (5hp, 3hp, 2hp, 1hp, 0.50 hp) , -accelerometer set of 5 with different frequencies , compressometer-extensometer for concrete specimen , concrete surface-mount strain gauge system , compaction factor apparatus , portable digital microscope system , portable density meter , axle pad weighing system , temperature controlled water bath , gyratory compactor for asphalt specimens , normal refrigerator , environmental climate chamber , contact angle meter , bitumen emulsion charge detection instrument , drainage and seepage tank (visualisation of seepage flow) , symons rain gauge , digital rain gage , rainfall event logger , digital evaporation recorder , eco sounder , universal water current meter with direction indicator , vibratory hammer , concrete specimen cutter , accelerated curing tank , compressor with nozzle , double distillation assembly , indian standard sieves (200 mm diameter) , indian standard sieves (300 mm diameter) , indian standard sieves (450 mm diameter) , sieve shaker mechanical tapping motion , oven , digital weighing balance (15 kg) , digital weighing balance (30 kg) , digital weighing balance (220 g) , cone penetration apparatus determines the liquid limit of soils , shrinkage limit apparatus , density bottle , compaction moulds (light and heavy both) , compaction hammer (light and heavy both) , loading frame mechanised for soil and material testing applications, including unconfined compression (uc), cbr, and similar tests-50kn universal frame. , loading frame manual , proving ring: 2kn, 10kn, 25kn, 50kn, 100kn. , dial gauge: 0.002x5mm, 0.01x25mm-3 nos each in 1 set. , pvc drum (barrel) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , measuring cylinder (borosilicate) , rubber glove , stop watch , spatula , glass plate , glass plate , glass plate , air tight container , air tight container , steel ruler , steel ruler , borosilicate beaker , borosilicate beaker , borosilicate beaker , measuring jar (plastic) , measuring jar (plastic) , non-return valve, air valve , m.s flange , lubricating oil , lead , spum yarn , water meter , pvc bend , pvc y branch , pvc dod bend , pvc pipe sloc , c.p piller tap , c.p waste coupling , pvc waste pipe , pvc connection flexible tube , ppr pipe fittings , pvc floor trap , pvc gully trap , pvc multi trap , pvc multi floor trap , white cement , pop (plaster of paris) , push cock , plastic water tank , water tank overflow alarm , butane/propane disposable cylinder , scaffolding pipes: , shuttering plywood sheets , plastic brick mould. 9"x4.5"x3" , mould and concrete spacers plastic i shaped dumbell paver mould 60mm , plastic zigzag paver mould , plastic cosmic paver block mould , pvc mold for cement cover block multi cover (20/25/40/50mm-42 kvt without hole) , pvc mold for cement cover block multi cover (20/25/40/50mm -25 kvt with hole) , ms h-beams: 100 100 length 1 m , ms h-beams: 100x100 length 2 m , ms h-beams: 100 100 length 3 m , ms h-beams: 150x150 length 1 m , tie rods: 2 m , tie rods: 3 m , formwork clamps/clips: , shuttering oil/release agent: , polythene sheets , adjustable column clamp , adjustable concrete beam formwork clamp , adjustable concrete beam formwork clamp , corner angles for formwork: , safety belts and harnesses: , flagging reflective tape: , scaffolding safety tags and tag holders , safety gloves , safety jacket , safety helmets , safety boots

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

CTN :45176506

05 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of garbage disposal plant -garbage incinerators , garbage bins , concrete foundationf for incinerators , fencing , galvanised steel metal gate , hdpe pipe , water ro system , water stroge 1000 ltr , plumbing , flexible pipes , signing board , 2 hp motor along with accessories , installation charges

Central Government/Public Sector

CTN :45371767

18 Jun, 2026 NA

Ferozepur - Punjab

Tender For certain b/r repair to plumbing sanitary items pvc doors and other allied works in various md accn in area of age b/r ii of ge (west) ferozepur - demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed., dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed., demolition of brick work built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed., taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., m&l for taking down existing stop valve / bib cock 15 mm bore by replacing head/washer/spindle/cap etc and refixing the same complete all as specified and directed., m&l for taking down existing low level flushing cistern and refixing after replacing the syphon, ball valve with washer and flush handle complete all as directed., demoletion and breaking up drain pipes 110 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, demoletion and breaking up drain pipes 75 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed., m&l for brick work built in cement mortar (1:6) with sub class b old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed., s&f 50mmx47mm size solid pvc door frame made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified shown on drawing and specified and directed., s&f factory made 30mm thick (style) solid panel pvc door shutter consisting of frame made out of ms tubes for top & bottom rails, ms frame covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 b.2.1 of mes schedule part-ii (2004) complete all as specified shown on drawing and specified and directed., s&f ptmt tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed., s&f ptmt butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed., s&f ptmt handle 150mm long fixed with steel screws complete all as specified and directed., m&l for 25mm thick plain cement concrete (1:2:4) type b-0 using 12.5 mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed., m&l for 10 mm thick (square/ rectangular) light shade vitrified tiles coloured, premium quality, joint-free, area of eac

Central Government/Public Sector

CTN :45375193

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For maint and repair of street lights security lights and solar lights and its connected items including repair to lt distribution network at mh and 41 arty div under ge mh and rh khadki - taking down old unserviceable lt ug cables of size upto 50 sq mm from trenches / poles / ducts etc complete all as specified and directed., supplying, laying, jointing, commissioning and testing xlpe insulated screened pvc bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade confirming to is-7098 (part-i-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by engr in -charge for following sizes . make :- polycab/havells / gloster / finolex note :- earth work , bricks , riddled earth , gi pipe for protection of cable will be measured & paid under relevant items of schdule . , 50 sq mm 3.5 core ., 35 sq mm 3.5 core, 25 sq mm 3.5 core, 16 sq mm 4 core., 10 sq mm 2 core, 6 sq mm 2 core, excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed., ditto item no 3 but in hard/dense soil., removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed, returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed., material and labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. note - punned thickness shall only be measured & paid ., material and labour for road cutting/foot path and making good with pcc 1:3:6 type c-2 ( using 40 mm graded stone aggregate ) of 150 mm depth complete all as specified and directed., supply and laying un-reinforced precast concrete cable cover lv, type i, flat, size 250mm x 150mm x 40mm for under ground cable all as specified and directed., supply and laying gi tubes light grade, galvanized, 40 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable all as directed, ditto item no -10 but 80 mm bore., material and labour for plain cement concrete (pcc) 1:3:6 type c2 using 40mm graded stone aggregate for making foundation of pole/stay assembly complete all as specified and directed., material and labour for plain cement concrete (pcc) 1:3:6 type c1 using 20mm graded stone aggregate for making copings of poles etc complete all as specified and directed. ., material and labour for earthing complete with galvanised steel earth plate eletrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level, connected to the earth lead wire 4.0 mm dia (gi wire) size, by means of bolts, nuts, check buts and washers of galvanised iron, earth lead wire 4.0 mm dia protected by provision of gi medium grade pipe 15 mm bore including provision of 40 mm thick cover of rcc (1:2:4) 20mm graded stone aggregate re-inforced with xpm (weight not less than 4 kg per sqm) and frame of angle iron 40x40x3 mm with lugs 02 nos and with 6 mm dia ms bar handle made to shape, gi light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edged of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning filling in distance not exe 50 mtr and removal of surplas soil to plate no 3 of ssr 2009 part-i and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. , material and labour fo

Central Government/Public Sector

CTN :45374545

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, rails used in structures, gipipes, castiron pipes, fabricated structural (ismb, ismc, isa i beams), earthin g plates, engineering items such as bridge side guards, cut mast with / without bricks, cut angles and chanels, angles with rail fittings and attachments used in engineering structures, frame of steel, ms channels, i beams, tees, framework of steel, cut rails, structural steel, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, gi pipes, ci pipes, cast iron items, water channel sheets, support structures and fabricated rails with or without brick/concrete, minor nonferrous wire attachments, rails used for structural support, fob materials, cut parts of girders,fob electrical channels, ladders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. note: (1) cutting permission is granted to heavy nature items to lorry loadable sizes only. (2) loading by crane is also permitted. (3) if any non-ferrous materials found should be handed over to custodian. location: b row bin 16

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

Central Government/Public Sector

CTN :45140820

03 Jun, 2026 31.42 Lacs

Chirmiri - Chhattisgarh

Tender For corrigendum : supply of precast concrete pipes (with and without reinforcement) (v2) as per is 458 (q2)

CTN :45096943

03 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For corrigendum : invitation of rates for flex printing and other items for year 2026-27 at nagar parishad rau distt. indore second call all rates should be qouted excluding gst. -flex printing (standard thickness); flex printing (black back, 280 gsm thickness); vinyl printing for stickers, etc. (including cutting); vinyl printing for branding, etc.; vinyl printing on 5mm foam sheet for branding, etc.; vinyl printing on sunpack sheet for branding, cutouts, etc.; sunpack sheet with printing for branding, cutouts, etc.; one-way vision printing and pasting for branding, etc.; eco-solvent vinyl printing for stickers, etc. (including cutting and lamination); eco-solvent vinyl printing on 5mm foam sheet; glow sign boards; acp sign boards (supply) – acp sheet base, ms tubular frame (1.5-inch), with printed retro-reflective media or radium lettering; ms poles for glow sign/acp/acrylic boards; production of various-sized 'handy plates' (handheld placards) for rallies, including handles; production of iron frames (various sizes) – 3 kg heavy-duty (made from 1-inch pipes with adequate support); production of iron frames (various sizes) – 1.5 kg light-duty (made from 1-inch pipes with adequate support); ms standee (folding) supply – size: 6x3 ft; specifications: 280 gsm black back quality, including framing; weight: 3 kg. supply of aluminum roll-up standees (manufactured with heavy-duty iron frames) – size: 6x3 ft, specification: 280 gsm black-back quality; supply of aluminum roll-up standees – size: 6x2.5 ft, specification: 280 gsm black-back quality; canopy size: 4x4x6 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); canopy size: 6x6x7 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); single-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color posters (18"x23" size) with gumming sticker – per lot of 1,000 pieces; labor charges for flex installation; labor charges for vinyl pasting; installation of various types of glow sign / acp boards (including necessary materials such as concrete, sand, cement, and other supplies), inclusive of labor; labor charges for sunpack sheet installation; a4 size invitation cards (multi-color, with lamination and envelope).

Cement Pipe Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector