Latest cement tile Tenders | Government cement tile Tenders

CTN :45303463

13 Jun, 2026 1.93 Crore

Kangra - Himachal Pradesh

Tender For corrigendum : supply of ceiling mounted tile microphone , ceiling mounted network dante speaker , dante based digital signal processor , hardware or software audio based control systems with handheld pad , 48 port poe plus gigabit network switch , optical fiber hdmi cable 30 mtr , cable and conduits as per site requirement , data wall display (q2) , data wall controller (q2) , online ups (?10 kva) with battery conforming to is 16242 (part 1) (q2) , networking / server rack (q2)

CTN :44557613

11 Jun, 2026 19.34 Lacs

Ludhiana - Punjab

Tender For corrigendum : construction of retaining wall cum boundary wall and tile terracing at try jagraon

CTN :45406405

26 Jun, 2026 NA

Patti - Punjab

Tender For supply of tiles cutter machin 1200w comma 110mm tile , tile cutter blade make bosch , floor tiles 600 x 600 mm make kajaria , non skid 300 x 300 mm , wall tiles 8 inch x 12 inch make kajaria , wall tiles 200 x 300 mm off white colour , white cement , marble white , granite black , angle iron 2 inch x 2 inch x 15 ft long , iron flat patti 1 inch x 5 inch long , welding rod 2 pt 5 mm , welding rod 3pt15 mm , steel cutting disc big size 14 inch dia , grinding stone , nut and bolt 8 mm x 1 pt 5 inch long , nut and bolt washer , steel drill bit 8 mm comm 4 mm and 6 mm each two , cgi sheet 10 ft x 3 ft and 0 pt 63 mm thick , cgi sheet 6 ft x 3 ft and 0 pt 63 mm thick , cgi sheet 8 ft x 3 ft and 0 pt 63 mm thick , pbs roll 20 m x 1 m x 2 mm , concrete hammer drill bit 6 mm make bosch , concrete hammer drill bit 8 mm make bosch , mirror cabinet , corner shelf , towel rail , toilet paper holder , soap stand holder , cloth hanger for hanging cloth * /bid number : gem/2026/b/7589302 + /dated: 02-06-2026 ' ' / bid document 1 / 27

CTN :45419297

06 Jun, 2026 49.97 Lacs

Delhi - Delhi

Tender For upgradation/renovation of mps bungalows under sub div-iii of pawd-i, new delhi dg.2026-27 (sh: provision of parking shed, wall tiles work, laminated flooring, heavy duty tile work, repairing of servant quarters etc. at 18 janpath road)subwork/packages:provision of parking shed, wall tiles work, laminated flooring, heavy duty tile work, repairing of servant quarters etc. at 18 janpath road

CTN :45327707

03 Jun, 2026 2.00 Lacs

Rajouri - Jammu And Kashmir

Tender For corrigendum : const of protection wall and tile work from main road to kamal kishore moh

CTN :45388726

17 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of caddie canteen : : - earthwork excavation , concrete work 1 5 10 , concrete work 1 3 6 , tile work , steel angle tubular , color coated profile sheet , steel pipe work , acp sheet , roof , aluminium work with glass beading including all hardware , granite slab block , sink , plumbing work , false ceiling , heat insulation , hardware items , civil work , commercial type dustbins , induction utensils , wiring for panel , wall fan , wire , exhaust fan heavy motor , tube light , water cooler , 16a socket , 16a switch , 6a socket , 06a switch , 8m plate , cable , db box , 32a mcb , 8 to 32a spn , glowing boards , induction plate , earthing for container

CTN :45373225

09 Jun, 2026 NA

Jaipur - Rajasthan

Tender For supply of curtain rode holder , water tank cover , glass plain 4mm 4x3 , cp whb mixture 15mm dia , cp bib cock 15 mm , ewc floor mounted tile complete set , kitchen stand ss 40x36x10 , ss tower bolt 150mm , cp angle valve 15 mm , ewc seat cover , glass shelf 18 inch , glass corner 10 inch eith angle frame , cp towel ring , door stoper double aluminium , pvc waste pipe 32x 800 , fancy overhead shower 150 mm , gi tubing 20 mm , door seal 4 feet long , syphon set complete , cpvc pipe 20 mm , oil putty , tower bolt aluminium 150 mm , door handle aluminium 150mm , spindle 15mm , cp tower rail 600mm , tumbler holder , tower bolt aluminium 100mm , cpvc pipe 25 mm , cpvc pipe 15 mm , cloth hanger 5 pin , mcb 4 pole 63 amp , mccb 4 pole 250 amp , false ceiling light 2x2 , copper cable 1.5sqsingle core , regulator for fan , copper cable sigle core 4 sqmm , geyzer 25 liter , sp 32 amp , regulator socket type for fan , led bulb warm white threaded , mcb sp 10 amp , copper cable single core 2.5 sqmm , socket modular 6 amp , mcb sp 25 amp , mcb 16 amp , modular gang box 4 module , wash hand basin , waste coupling , angle valve , connection pipe , soap dish , towel ring , health faucet , toilet paper holder , towel rack , towel rail , soap dispensor , wash hand basin mixer , ewc , two way bib tap , grating 150 x150 , corner self , looking mirror , wall mixer , bathroom shower , hand shower , sink mixer , sink stainless stell , urinal , pressmatic , urinal partition , pillar cock 200 mm extention , bottle trap , singlr pc water closet , automatic hand dryer , capacitors for electric fan motors as per is 1709 (v2) (q3) //bid details 2 / 60

corporations/Associations/Others

CTN :45398762

10 Jun, 2026 10.66 Lacs

Delhi - Delhi

Tender For special repair of roads in ndmc area during 2025-26. sh - providing and fixing slate tile cladding on the boundary wall at bonsai under r-ii division.

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Central Government/Public Sector

CTN :45382115

10 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 55 )items as given below ,[1] supply and spreading of washed, gravel 0.500 m3,[2] supply and laying of selection grass 58.000 m2,[3] plstrng,priming timber or steel,1coat 200.000 m2,[4] paintg enamel,timber,hi gloss,2coat,wh 100.000 m2,[5] supply&laying chequered tile,thk25mm 200.000 m2,[6] dismantling of brick work 5.000 m3,[7] excavation of earthwork 100.000 m3,[8] earth wrk in filling in lawn/hedge area 150.000 m3,[9] filg including supplying,sand 20.000 m3,[10] removal,rubbish,earth 5.000 m3,[11] prvdg,rcc wrk,m20 4.000 m3,[12] cutng. bending etc, steel reinforcement 0.300 to,[13] supply,fitg,fixg,granite slab,thk10-12mm 30.000 m2,[14] prvdg,pcc wrk,m15,1:2:4 20.000 m3,[15] stripping,worn out plaster wall&ceiling 5.000 m2,[16] dismantling of pcc/ rcc structures 2.500 m3,[17] paintg enamel,timber,hi gloss,2coat,?wh 100.000 m2,[18] applg,after of primer 1coat 400.000 m2,[19] flyash br wrk,230mm,m7.5,super sturcture 58.500 m3,[20] fly ash brick wrk, 110mm, m-7.5, (1:4) 160.000 m2,[21] fixg marble flooring,thk16-18mm tiles 5.000 m2,[22] sweeping and cleaning 50.000 m2,[23] strl works using ss grade-304 1100.000 kg,[24] supplying fixing of ss letter, logo etc 100.000 in,[25] supply,sweet earth,unloadg&carrying 5.000 m3,[26] supply,1st qty ceramic tiles,cld dec 1.000 m2,[27] fixg,kota tiles on walkway 1.000 m2,[28] artistic wall painting 380.000 ft2,[29] colour washing,pigment,int.all flr,2coat 400.000 m2,[30] prvdg,colour wash to wall,2coats 100.000 m2,[31] ms structural work, weigh<22.5kg/m 2500.000 kg,[32] prvdg,neat cement finish 20.000 m2,[33] plaster sand/cement mortar,6:1,thk15mm 330.000 m2,[34] plaster sand/cement mortar,6:1,thk20mm 200.000 m2,[35] brick flat soling 300.000 m2,[36] supply & fixing precast rcc garden chair 2.000 ea,[37] fab. erect. of life sculpture 3 to 7feet 1.000 ea,[38] drilling & tapping ci main,upto 15mm 1.000 set,[39] fixg brass ferrule for dia15mm gi pipe 1.000 ea,[40] fixg gi pipe,tata,dia15mm,medium quality 5.000 m,[41] fixg gi pipe,tata,dia20mm,medium quality 5.000 m,[42] fixg gi pipe,dia20mm,medium f/ug work 10.000 m,[43] fixg gunmetal wheel valve,21kg/cm2,20mm 2.000 ea,[44] fixg cp bib/stop cock,ord light,15mm 2.000 ea,[45] fixg,polythene stop/bib cock,15mm 2.000 ea,[46] fixg of dia20mm float valve complete 2.000 ea,[47] carriage of plastic storage tank,<1500l 2.000 ea,[48] lbr f/hoistg,<1500l,<1st storey frm gl 2.000 ea,[49] fixing 1812 litre tank

Cement Tile Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector