Latest center pivot Tenders | Government center pivot Tenders

Central Government/Public Sector

CTN :45735808

16 Jul, 2026 NA

Bengaluru - Karnataka

Tender For supply of kit for locking arrangement for center pivot pin to drg. no. wd-85079/s-2, alt-28 consisting of (1) shackle lock- item no 7, (2) pin- item no 8, (3) split pin to size 3.5mm dia and 50mm length. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45733184

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dredger drum, chain, centering disc, ms liners, center pivot washer, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, wear plate, adopter wide jaw, suspension rods ,equalizing stay, erc clips, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, adapter broken, center pivot top, anvil, workout sab, plate screws, transformer body and its ms parts, knuckle, fabricated test rig, gear wheel, anchor link, brake beam cut parts, axle box housing, bearing plates, rivette, chair plate, ms bed plate, ms gauge tie plate, structure bar, ms tie plates, slide chaires, center pivot, tamping tools, jim crow, cribs, track machine parts, locking plate, operating handle, cbc lock, cbc yoke, lower spring sheet beam, rail tong, center beams, screw couplings, lower spring sheet beam, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, iron rods, wire, bolt & nut and other items coming under ms scrap on as is where is condition is available under the custody of cdms 08 ward ap. note: 1.pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only.(loc:bin no. 121 at scrap yard)

CTN :45722033

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation for portable cabin furniture item and electric item for senior citizen in vile parle east beat no.84 in k/s ward.- providing & laying dry stone rubble soling , p/l 1:3:6 cc, , uncoursed rubble masonary in foundation, , nominal mix of 1:2:4 (1 cement opc: 2 coar, , providing & fixing full height both, , providing and fixing 2mm thick antistatic, , providing and fixing superior quality, , providing and fixing in position two track, , p&f in position aluminum louvered, , providing and fixing ms safety grill of, , w.c. pan with isi marked white solid, , providing & fixing in position make cp jet, , p/f wash basin, , providing and placing polyethylene, , p/f bib cock, , providing and fixing of modular table of, , providing and supplying center pivot,, , providing and supplying visitor chair, , st. street pole benches 6f-d-ro1,6f-, , p/f exhaust fan, , light/fan/ex.fan point, , supply & inst of 150mmx150mm led, , mcbs in 16 swg crca sheet steel, , 63a sp mcb, , 3 noss. single core cu pvc insulated, , supply & inst. of water purifier, , nominal capacity 1.0 tr (3024 kcal / hr.

Central Government/Public Sector

CTN :45709465

20 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of hex head bolt & castel nut for center pivot arrgt to icf drg.no.t-o-6-614.alt.d/nil. item.1,2,3,4,5. item: 1)hex. head bolt ?is:1364(part-1)/ iso 4014-m24x110-8.8=01nos.2)castle nut m24 is:2232-b-8 =01nos., 3)punched washer a 26 is:2016 =01nos., 4)split pin dia5x56mm to drg no. t-0-6-601 alt s/17 is:549=01nos, 5)washer iso 7089-24-200hv=02nos. note1) zinc electro plating to a3l of is:1367(part-eleven) , 2)bolt shall be of make tvs or dflor unbrako or lps only, 3)item 3-punched washer and item-4 split pin and item-5 washerall galvanised to is-1573-86 service grade no.2 of tab- 2, 4)hole shall be throughlycleaned and applied with rust prevention oil., 5)split pin should be galvanized to is:1573-86 service grade no.2 of tab-2. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702805

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no wc-07001fac/icf note : - 1 advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b.lot no. bpl/crws/26-27/cond. coach/15/0068 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45702806

01 Jul, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decoram, non-ferrous & restricted items will not be delivered) coach no 1-wc-910037 art/beml2-wc -920016 art/beml 3-wc-910036 art/rcf note : - advance handing over of coaches for cutting may be allowed. 2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b.lot no. bpl/crws/26-27/ cond. coach/15/0069 restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. note: delivery will be made on actual nos basis.

CTN :45708638

20 Jul, 2026 NA

Multi City - Multi State

Tender For supply of cast steel bolster with integrated 14'' center pivot bottom for lwlh25 bogie as per rdso drg. no. wd-13012-s-5 (sheet 1, 2) with latest alteration (item no. 1 duly welded with item no. 2,3,4) confirming to rdso spec. no. wd-40 lwlh25 bogie (''k''- class)-2015 with latest amendment. material & spec. as per drg. and rdso spec. [ warranty period: 72 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702704

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no: 98050126. condemned and unserviceable ferrous melting scrap consisting of side buffer plungers and buffer casings with/without spindle in full/broken/cut, knuckles and coupler yoke for cbc,end shields,control arms , axle boxes, axle box housings with or without original attachments, bmbc components ,side bearer covers ,screw couplings and its link parts, bearing cover casings,grease collors, anchor links with or without silent blocks, brake shoes with or with out brake blocks, draw hooks, draw beams,draft keys,iron pulleys, pipes of sorts and sizes, spacers,sims,washers, bolts,nuts, studs,pins, brackets,brake shoe keys, metal rings, rods of sorts and sizes, cotter pins, small/broken coil springs, hanger blocks, iron balls of roller bearings and its inner and outer spacers, duct assembly,huck bolts,huck bolt tails ,gudgeon pins, ms plate cuttings, bss hanger pins and holders, springs in full/broken, end locking screws ,traction rods,suspension tube bearings, floating levers, bearing racers, locking plates, axle stay, bearing sleeves, pull rods, draft gears, bearing adapters, vacum brake clamps, wheel hubs, ctrb bearing components, valves of sorts and sizes ,bearing outer rings, brake rigging components ,traction motor assembly components, equiilising stay rods, car body rods, traction levers, tensioning rods, buffer plunger full assemblies , valve springs, coupler rods, angle cut pieces, cbc couplers, alternator rotor shafts, connecting rod with or without piston, piston carriers, center pivot top and bottom parts and other similar items melting in nature.note: 1] crane loading is permitted. 2] if any non ferrous items found, should be removed and returned to railways by the purchaser.

Central Government/Public Sector

CTN :45652520

20 Jul, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of center pivot pin to icf drg. no. t-0-6-602 alt. c/14, item no. 1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45638431

29 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of shackle lock with washer, center pivot pin & lock pin for lhlw 25t bogie for boxns wagon rdso drg. no. wd-15013-s-01 alt. 5 or latest item no. 2,3,4 & 5 [ warranty period: 30 months after the date of delivery ] ]

Center Pivot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors