Latest center bolt Tenders | Government center bolt Tenders

Central Government/Public Sector

CTN :40575313

09 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of hex head bolt m16 x65-10.9(ht) as per specn no. is:1364 (pt.1)/2018, is:1367(pt.3 )2017, ce coating as per rcf/mdts-057 and the item should be procured from rdso appro ved sources of axle end high tensile cap screws in the current rdso vendor directory. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40554462

30 Jun, 2025 NA

Kheda - Gujarat

Tender For supply of h.t. fasteners at wtps. - grub screw allen head size m10x25 unbreko make, high tensile hexagonal head bolt, size m.20 x 100 mm, full thread (f.t.) mtl: steel conf. to is-1367, high tensile hexagonal head bolt with 2 flat washer, size m.20 x 80 mm, full thread (f.t.) mtl: steel conf. to is-1367, class 10.9., high tensile hex head bolt size m 24x120 long mechanical properties as per class 10.9 ., high tensile csk bolt with nut and spring washer size:m16x60mm full thread,property class 12.9 as per is:1367 unbrako/tvs/gkw/pfl make, unbr hex socket grub screw type g m6x25, high grade alloy steel grub screw size m8 x 20 full thread mtl alloy steel 45 h conf to is 6094, grub screw allen head size m12x25 unbreko make, ht allen bolt m 6x40mm gr.12.9, ht allen bolt m 6x 50, unbrako make hexagonal bolt, nut & spring washer size m16 x 60 full threaded of grade 10.9, high tensile hex bolt, size 3/4" x 2", full thread (f.t.), high tensile hex bolt & nut, size 3/4" x 2 1/2", half thread (h.t.), high tensile hex bolt & nut, size 3/4" x 3", half thread (h.t.), high tensile hex bolt & nut, size 3/4" x 3 1/2", half thread (h.t.), socket head cap screw (allen head bolt), size : 3/8" dia x 1" long bsw full thread of high grade alloy steel material properties:as per bs-2470, alenkey full thread bolt : 1/2"x1.1/2", socket head cap screw (allen head bolt) ,size : 1/2" dia x 1" long bsw full thread of high grade alloy steel material properties:as per bs-2470, m8x40 mm brass hex bolt, csk bolt- nut m8 x 50mm of coal mill xrp-783, unbreko make allen key bolt size: m08 x 50 mm, csk head cap screw size: m 10x30, unbreko make allen bolt size: m10 x 35 mm, high tensile hexagonal head bolt, size m.10 x 40 mm, full thread (f.t.) mtl: steel conf. to is-1367, bolt unbreko make (hex head) 10x50, allen key bolt m 10x50, boiler drum sepretor j bolt 12mm thick 2 no nut & 1 no washer, high tensile hexagonal head bolt, size m.12 x 60 mm, full thread (f.t.) mtl: steel conf. to is-1367, unbrako socket head cap screw size m.12 x 110 ht, hex head bolt of size m14x50 conf.to is 1364,din 933 property class 10.9 as per is 1367, ht hexagonal full threaded bolt with nut size-m14x60mm, unbrako high tensile hex.bolt & nut, size m.14 x 75 mm , full thread (f.t.), high tensile hexagonal head bolt, nut & washer of size m 16x100 full threaded of gread 10.9, unbrako hex.bolt size m.20 x 65 mm, stud with two nut size m.22 x 130 mm, full threaded., hex socket head cap screw, iso 4762, m24x50, gr 12.9, unbreako socket head cap screw size m. 24 x 90 mm screw, ht hex bolt nut m 24x120,gr.8.8, ht stud size: m24 x 210 mm with nut (90mm thread at one end & 40mm at other end), high tensile hexagonal head bolt of size m30 x 60, unbrako make hexagonal head bolt and nut with washer: m 30 x 170, high tensile hexagonal unbraco bolt of size m 32x160 with nut., unbreako socket head cap screw size m. 33 x 75 mm screw, high tensile hex bolt size m33x75 mm ft., hex head bolt, is 1364, m33x90, gr 10.9, ht hex bolt and nut with one spring washer m36x180mm gr. 12.9, high tensile hexagonal head bolt, size m.16 x 50 mm, full thread (f.t.) mtl: steel conf. to is-1367, ht hex. bolt and nut with two spring washers m12x40 gr. 12.9, unbreko make ht hex. bolt of m20x60mm with nuts and washer as per is 1364 din 933 and threads as per metric is-4218 bolt 10.9 grade, nut and washer 10.9 grade and having std pitch and thread length i.e. full thread., high tensile, hexagonal head bolt, nut & two plain washers, size- m8 x 40mm.

Central Government/Public Sector

CTN :40556838

23 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For supply of fuel gallery , valve spring locator valve cap , fuel pump assembly , set of benjo bolt , overhauling kit for feed pump , nrv for lub oil priming pump , nrv for fuel gallery , pipe assembly for turbocharger drain to fresh water pump , filter to fuel gallery , rocker cover gasket , flexicket joint , worm drive hose clip 70 mm

Central Government/Public Sector

CTN :40556926

10 Jun, 2025 NA

Khammam-T - Telangana

Tender For supply of hardware - nut hex m16, grade a8 , spring washer sc 16, grade 8.8 , machined washer a16, grade 8.8 , hex screw m12x60, grdae 8.8 , hex screw m16x125, grade 4.6 , nut hex m16, grade 4.6 , nut hex m8, grade a8 , spring washer sc8, grade 8.8 , hex bolt m16x70, grade 8.8 , hex bolt m36x100, grade 8.8 , nut hex m36, grade a8 , machined washer m36, grade 8.8 , gi bolt m16x50 hot dip, grade 8.8 , m14x50 hot dip gi bolts,grade8.8 , g.i bolt m12x40 hot dip, grade 8.8 , gi. plain waher m14 hot dip, gr 8.8 , g.i. spring washer m16 hot dip, gr 8.8 , gi spring washer m14 hot dip, gr 8.8 , gi spring washer m12 hot dip, gr 8.8 , gi nut m16 hot dip, grade 8.8 , gi nut m14 hot dip, grade 8.8 , gi nut m12 hot dip, grade 8.8 , set screw, m16x45, grade 8.8 , hsfg bolt m24x70, cl 10.9 gr. c is 1367 p2 , screw hex m16x45, grade 4.6 , hex screw, m24x140, grade 8.8 , nut hex, m12, grade a8 , machined washer, a20, grade 8.8 , screw, m16x65, grade 8.8 , set screw, m10x45, grade 8.8 , galvanized screw hex m12x40, grade 4.6 , galvanized nut hex m12, grade 4.6 , hex bolt m12x40, grade 4.6 , nut hex, m12, grade 4.6 , soc head scr cap, m24x40, grade 12 , m16x35 hex bolt, grade 8.8 , screw, m16x80, grade 8.8 , screw cap m20x60, grade 8.8 , galvanized bolt m16x90, grade 8.8 , galvanized nut m16, grade 8.8

Central Government And Public Sector

CTN :38601685

04 Jun, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras bid to ras tender for supply of dendrite adhesive , pc-65 , litre , cutting nozzle a-16 , nrv/check valve 40nb , type-vertical , nrv size-50mm , type-vertical , bearing puller size-300mm , coupling l-110 with spider , complete coupling set l-150 , plain washer m20 , cutogen 5 gas cutting torch with a-16 nozzle , safety goggles , loctite243 250ml , swivel type eye bolt m24 , nut&bolt m20x70(gr10.9) , ss hex head bolt m10x70 , hex head cap screw m10x20 , hex head bolt with nut & washer size m20x100 , m10x25 socket head bolt ss , m12x75 double end threaded stud with nut and washer , hex head m6x50 bolt with nut , ss hex head m6x25 bolt with nut & washer , hex. head bolt m20 x 140 , ht hex nut bolt m20x100 mm , hex. head bolt m20 x 80 lg , m16x80 hex head bolt , hex head bolt m20 x 200 , hex head bolt m20 x 125 , wedge anchor bolt m24x150 , wedge anchor bolt m20x100

CTN :40008388

09 Jun, 2025 NA

Udhampur - Jammu And Kashmir

Tender For corrigendum : procurement of mt spares - mg spares part :, bolt, bolt frt hood hinge, bolt, bolt, bolt no 2, screw, screw, screw, screw, screw, screw, screw, screw, pin, ball, ball, ball case, nut, nut, nut, washer, lock washer, key, bolt no 2(8x120), bolt (10x18.5 ), bolt no 1 (8x100), screw, bolt lever locating (10x18.4), nut, nut rh, nut lh, nut, nut, thrust washer no.3 (t. o.8), thrust washer no 2(t 0.7), thrust washer no 1(t 0.6), thrust washer no.2 (t :1.0), thrust washer no 3(t:1.1), thrust washer no1 (t :0.9), (deleted) lock washer, washer, thrust washer, washer, washer t/m oil level plug, gasket, gasket, spacer (8x12x15), spacer, shim (t.1.15), shim (t-1.18), shim (t.1.21), shim (t.0.30), spring pin reduction frok, pin, spring pin gear, plug oil filter, plug oil level, plug, cap choke cable, plug timing belt outside cover, roller shaft sft interlock, bearing frt wheel, o ring, o ring distributor case, o ring guide oil level gauge, o ring, o ring oil strainer, o ring, oil seal, oil seal, oil seal, seal valve stem, bush, bush sprg shackle, cushion front, cushion case, hose water by pass, circlip axle shaft, circlip main shaft rr, circlip, e ring, clip heater hose, clamp, clamp heater hose, spring inner, spring outer, spring select return, spring axle housing breat, absorber assy rear shock, absorber assy front shock, spring, spring, bulb (12v 3.4w), bulb(12v 1.4w), bulb turn signal (12v 21w), bulb 12v 21/5w, bulb (12v 5w), bearing input shaft, pully crank timing belt, tensioner comp timing belt, gangue water temperature, gauge assy water temp, head lamp assy, lamp assy fornt fog, lamp assy comb rh, boot lever no1, shaft input, shim input shaft (t:0 3), gear counter, shaft counter, retainer output shaft, shim output shaft (t:0.1), shim output shaft (th:0.3), support open spring, latch assy front door rh, latch assy door rh, (deleted) latch assy front door lh, latch assy door lh, handle lock, cover gate handle, stricker lock, spacer, handle inside rh, handle inside lh, regulator assy frt dr window lh, joint rubber, bush column, rubber seal, dumper assy steering, connector tie rod end, tie rod steering, (deleted) rod assy steering drag, pad, (deleted) piston/cup set, bulb head lamp 12v 45/ 40w, fuse 15 amp, spark plug (champion rc 8 yc), spark plug, jet second, jet pilot, wrench spark plug, light assembly indicator, lens rh, lens lh, lens turn signal, lens tail stop, lamp assy room, lens back up rh, lens back up lh, harness assy wiring no.2st, harness assy wiring no.2, weather strip door outer, strap inside, scrape inside, glass wind shield, glass front door rh, glass front door lh, weather strip wind shield, weather strip door rh, trim operating extension assy, weather strip door lh, hub front drive clutch, sleeve front drive clutch, fork front drive shifting, handle jack, checking tool set, 3m way joint & hose, gasket & reservior, washer fr disc flexible hose, spring hold down, piston cup/boot set, spring tensioner, valve intake, valve exhaust (4 valve mpfi), seal valve stem, weather strip back door opening, mirrror assy out rear view rh, mirror assy inner rear view, cushion assy rh front soft top, cushion assy lh front soft top, back assy rh, back assy lh, tie rod end remover, bearing installer, steering pinion bush, side brg remover, wrench oil filter, oil pressure gauge, fork reduction shifting, boot lever no.1, gear speedometer drive, bolt spdom drive gear, pin, tank assy fuel, jack assy, jack assy, weather strip door rh, wheather strip back door, liquid gasket three bond 1207c, engine valve set of inlet and exhaust, shoe set rear brake, spring shoe return no.2, lock assy steering, switch assy change over, switch assy backup lamp, switch 4 wheel drive, switch assy stop lamp, switch assy oil pressure, gasket case front, mounting rh front/lh, mounting rh rear, nut, washer, spacer, oil seal, oil seal, o ring, o ring, spring, carburator assy, valve assy needle, float, jet assy slow, valve lifter, piston ring comp

CTN :40568259

23 Jun, 2025 NA

Darjeeling - West Bengal

Tender For supply of locking pin , front roll , front axle , bushing , grease nipple for front roll , end cap , segment bolt , key washer , grease nipple , bolt for worn case cover , bolt for key washer , dust guard lh , dust guard rh , driving ring , hex bolt , spring washer , locking wire , die , pin lever , selector arm shaft , bolt , fulcrum pin , guide bolt , bolt for cover , stud , shim set , distance piece , bolt with nut and locking , distance washer , distance tube , nut and pin , bush , oil seal , set screw , rear clamp plate , main bearing housing , lock nut , inner distance piece , front clamping plate , cheese head bolt , clutch casing , clutch facing ring , cheese head bolt with nut , driving pin , clutch pressure ring , eye bolt , pin for clutch link , clamping plate , roller bearing , clutch link , clutch driver , pin for clutch casing bid number/ & ( * ) : gem/2025/b/6281668 dated/ + : 02-06-2025 bid document/ 2 2 1 / 53

CTN :40557205

20 Jun, 2025 NA

Thanjavur - Tamil Nadu

Tender For tender for supply of retainer o ring (ms sl-163) , bulb , fuze , cap , nut pulley , bearing collar , spacing collear , socket 10mm , plunger spring , nut (d50a15 ms sl-27) , stud , hose plain , o ring , bolt cutting edge(ctlg fig-7005) , screw-lower , o ring , hyd filter steering element(fig-5030) , ring snap , valve (ispl 497tc -feed pump) , wire harness , yoke , bolt(fig-7005) , gasket , gasket , spring valve , o ring , bolt , bearing needle (ms sl no-349) , assy fuel line(feed pump to filter) , bolt , cap assy , knob , washer (ctlg fig-305&306) , cover engine lh , washer (bd50 nozzle fuel injector) , o-ring , o ring , gasket , clamp , bolt , nut(fig-7005) , gasket , cylinder head gasket kit(fig-k1) , guard track inner r h , o ring , gasket , clamp , gasket , o ring , bolt , packingdust , dust seal , element inner(fig-1411) , valve intake(fig-1010) , seal , head lamp (ms sl-459) , lamp indicator , valve exhaust(fig-1010) , o-ring , gasket , manifold water rear , gasket , gasket intake , insul(bush)top , insul(bush)bottom , lamp guard front lh , positive terminal(ms sl-196) , hose , sre bracket assy , rectifier assembly , nut , seal water , seat valve exhaust std(fig-1010) , hose spill , filter element (outer)(fig-1411) , bulb 24 volt (fig no 1065) , water temp gauge , lamp guard rear lh(fig-1060) , hammer , seal , plug drain , disc (a) (fig-3056) , seal oil(ctlg fig-4005) , main clutch assy (ctlg fig-10) , disc (b) (fig no-3056) , oil seal , final drive service kit(p-137) , cover , cover , element assy(fig-1411 oblique 1) , seal oil , plunger idler , cartridge , shaft carrier roller , v belt , bit end lh(ctlg fig-7005) , edge cutting(fig-48) - (1307041131) , hose pre filter to fine(fig-4110) , rotor assy , cap(fig-7005) , cover engine rh , bit end lh , pin piston , regulating sleeve , cartridge lf 3664 , bushing cam , gasket , cable , bearing bush , bearing bush ce , hose l 1200mm , lever brake , bearing ball , de bracket , nozzle (ims old) , switch starting(fig-1055) , brake booster kit (fig-3066) , gauge oil level , seal , oil , bushing - ce frame , bushing drive housing , track shoe bolt nut service kit , hose (bemal price list p-700) , tool kit set for d50 oblique bd50 , piston ring assy(fig-2350) , flywheel assy , shackle , hose(bd50 eng) , oil filter , hose , de ball bearing , gasket , gasket , push rod , bearing thrust std(fig-2310 oblique 15) , track roller assy s f , gasket , hose , seal front (front cover & gear) , roller single flange , roller double flange , seal front , hose , thermostate , cover front lh , ring seal , pipe inlet , gasket oil inlet , piston (ctlg fig no 2350 sl no -1) , guard track inner lh(fig-4005) , spacer fan (bd50 fig no 5010) , bushing , transmission service kit , o-ring , unversal joint assy(fig-14) , alternator (lucas) , cylinder liner , tube , bracket , brush gear ring assy , bearing main one pair u s 0.25mm , hose(fig-1410) , muffler(fig-1610) , bearing con rod pin , u s 0.25 mm , cyl block gasket kit(fig no-k2) , gasket head , pipe assy , valve , fan , gasket , tube , hyd cylinder assy l h , tube , tube (fig-2232) , tube , thermo housing , armature , gasket , air cleaner assy(fig-1410) , gear pump drive , head fuel filter , sprocket , pumping element , self starter , tandam gear pump (fig-2046) , turbocharger assy(fig-1510) , nozzle holder assy , steering clutch assy rh(ctlg fig-3055) , o ring , body relief valve , con rod assy , alternator assy , radiator assy (page no 44 n495c) , gear box assy , radiator assy , transmission assy (ctlg fig-16) , steering clutch assy (fig-3056) , steering c v assy (fig-3115) , hydraulic pump assy , cylinder assy lh , c frame assy (fig-7035)

CTN :40556919

21 Jun, 2025 NA

Amritsar - Punjab

Tender For supply of disc clutch , cover assy clutch , fuel pump motor , clutch release bearing , brake pad , fuel relay 12v , rear brake shoe , spark plug , cap fuel tank , oil filter assy , bolt 8x27 , lock nut

CTN :40229300

03 Jun, 2025 NA

Kupwara - Jammu And Kashmir

Tender For bid to ras supply of spareparts - toe plate for jcb with cat part no 61161escou53138112 , seal for jcb with cat part no 61161escou99000045 , side cutter lh for jcb with cat part no 61161escou53103207 , strainer for jcb with cat part no 61161escou32700401 , seal kit for jcb with cat part no 61161cscou99100018 , capsule for jcb with cat part no 61161escou00100557 , grommet for jcb with cat part no 61161escou55000162 , adapter flange for jcb with cat part no 61161escou62900366 , grommet for jcb with cat part no 61161escou5500016 , pivot pin aloy steel for jcb with cat part no 61161escou91112400 , pivot pin for jcb with cat part no 61161escou10192028 , pivot pin alloy steel for jcb with cat part no 61161escou10172004 , side cutter for jcb with cat part no 61161cscou53500103 , pivot pin alloy steel for jcb with cat part no 61161escou10192053 , lynch pin for jcb with cat part no 61161escou82600600 , pressure hose for jcb with cat part no 61161escou19090028 , side cutter rh for jcb with cat part no 61161escou53103206 , pivot pin alloy steel for jcb with cat part no 61161escou10192056 , pivot pin alloy steel for jcb with cat part no 61161escou91100500 , hose for jcb with cat part no 61161escou62901583 , lock handle key for jcb with cat part no 61161escou55000160 , rubber washer for jcb with cat part no 61161escou82300223 , gasket for jcb with cat part no 61161escou81300360 , hyd hose pipe for size ii dozer with cat part no chh0620519 , oil seal for size ii dozer with cat part no 985hm91032 , main clatch service kit for size ii dozer with cat part no 116mc00104 , hyd hose for size ii dozer , brak assy for size ii dozer with cat part no 116mc02146 , fuel filter for size ii dozer with cat part no 41z7181537 , oil filter for size ii dozer with cat no 3025180443 , fan belt for size ii dozer with cat part no 5236 , universal joint for size ii dozer with cat part no 4125181063 , insert paper filter for size ii dozer with cat part no 4125181063 , bty lead for size ii dozer with cat part no niv , bty pad for size ii dozer with cat part no niv , air filter inner for size ii dozer with cat part no 3121200272 , air filter outer for size ii dozer with cat part no 3121101547 , seal cap filter for size ii dozer with cat part no 147901 , o ring for size ii dozer with cat part no 129858 , o ring for size ii dozer with cat part no 700013035 , bolt for size ii dozer with cat part no 1547011140 , bolt for size ii dozer with cat part no1547011150 , seal for size ii dozer with cat part no 173368 , o ring for size ii dozer with cat part no 700003038 , hose for size ii dozer with cat part no as0604900ss , hose for size ii dozer with cat part no 64998 , hose for size ii dozer with cat part no 63411 , elbow on by pass filter for size ii dozer with cat part no 68645 , connection fuel inner for size ii dozer with cat part no 70855 , o ring for size ii dozer with cat part no 1507023320 , o ring for size ii dozer with cat part no 700003058 , screw cross head for size ii dozer with cat part no 147389 , bolt shoe for size ii dozer with cat part no 1503221321 , gasket water pump for size ii dozer with cat part no 9097 , o ring for size ii dozer with cat part no 700013032 , o ring for size ii dozer with cat part no 700013038 , o ring for size ii dozer with cat part no 700013025 , o ring for size ii dozer with cat part no 700003050 , screen filter for size ii dozer with cat part no 3734051 , o ring cover for size ii dozer with cat part no 164159 , hose for size ii dozer with cat part no 505062 , manifold fule supply for size ii dozer with cat part no 103512 , gasket for size ii dozer with cat part no 178788 , gasket for size ii dozer with cat part no 13273 , bit end rh for size ii dozer with cat part no 1507021343 , bit end lh for size ii dozer with cat part no 1507021353 , gasket housing to block for size ii dozer with cat part no 121779 , element corrision resister for size ii dozer with cat part no ar3879517 , water pump assy for size ii dozer with cat part no x31xc

Center Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector