Latest central verge repair Tenders | Government central verge repair Tenders

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

State Government

CTN :45237069

09 Jun, 2026 8.28 Lacs

Umaria - Madhya Pradesh

Tender For corrigendum : work contract for construction of toilet at entrance gate guard room, repair of erector hostel stage, and development of cricket pitch in gaytri ground at sgtps, mppgcl, birsinghpur.

CTN :45384070

09 Jun, 2026 99.02 Lacs

Silvassa - Gujarat

Tender For procurement of furniture for newly constructed sp complex at sayli. - providing ,supplying and fixing of upbeat modular desk based system of ht. 750 mm. dfine plus legs are fabricated by argo shield & have a rectangular shape. dfine plus legs are available for work top level 750 mm from base. wire management single power box with raiser for manager modules, single tables (8+3 anchor roma). soft closing access flap with brush. metal modesty: metal modesty is made from 0.8 mm thick crca. metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick hr worktop: 25mm thk prelaminated partical board with pvc lipping. model name : (upbeat 2100 + storage cum drw 900wx450dx750h rh-with leveller - ind lk : make : godrej), providing, supplying and placing of mid back chair. seat/back assembly: the seat is made up of 1.5 0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded polyurethane foam.the seat has extra thick foam on front edge to give comfort to popliteal area.the back is injection moulded in glass filled polypropylene which is upholstered withmesh fabric.the back consist of adjustable lumbar support made of injection mouldedpolypropylene having an adjustment of 5.0 0.1 cm.the chair seat & back size are*seat size 53.5 cm. (w) x 51.0 cm. (d)*mesh back size 51.0 cm. (w) x 70.0 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45 2 kg/m and hardness 16 2 kgf as per is:7888 for 25% compression.armrests :the adjustable armrest is designed with the following features : up-down adjustment 6 steps (7.2 0.5cm range) armrest top is mounted on armrest structure made of glass filled nylon armrest top is pu moulded over glass filled nylon insert.center tilt synchro mechanism with multi lock : the mechanism isdesigned with the following features: 360 revolving type. 3 position locking with anti shock mechanism. tilt tension adjustmentpneumatic height adjustment: the pneumatic height adjustment with anadjustment stroke of 9.5 0.3cm.pedestal assembly : the pedestal is injection moulded in glass-filled nylon andfitted with 5 nos. twin wheel castors. the pedestal is 66.1 0.5cm. pitch-center dia.(76.1 1.0cm with castors).twin wheel castors : the twin wheel castors are injection moulded in black nylon.width (w): 76.1 cm.depth (d): 76.1 cm.height (h): 101.5 - 111.0 cm.seat height (sh): 44.5 - 54.0 cm. (model name : thrill mesh full back : make : godrej), providing, supplying and placing of mid back chair. seat/back assembly: the seat is made up of 1.5 0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded polyurethane foam.the seat has extra thick foam on front edge to give comfort to popliteal area.the back is injection moulded in glass filled polypropylene which is upholstered withmesh fabric.the back consist of adjustable lumbar support made of injection mouldedpolypropylene having an adjustment of 5.0 0.1 cm.the chair seat & back size are*seat size 53.5 cm. (w) x 51.0 cm. (d)*mesh back size 51.0 cm. (w) x 70.0 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45 2 kg/m and hardness 16 2 kgf as per is:7888 for 25% compression.armrests :the adjustable armrest is designed with the following features : up-down adjustment 6 steps (7.2 0.5cm range) armrest top is mounted on armrest structure made of glass filled nylon armrest top is pu moulded over glass filled nylon insert.center tilt synchro mechanism with multi lock : the mechanism isdesigned with the following features: 360 revolving type. 3 position locking with anti shock mechanism. tilt tension adjustmentpneumatic height adjustment: the pneumatic height adjustment with anadjustment stroke of 9.5 0.3cm.pedestal assembly : the pedestal is injection moulded in glass-filled nylon andfitted with 5 nos. twin wheel castors. the pedestal is 66.1 0.5cm. pitch-center dia.(76.1 1.

State Government

CTN :45360598

17 Jun, 2026 30.00 Lacs

Ranchi - Jharkhand

Tender For supply, delivery and installation of office furniture required for new office building at jusnl hqrs, kusai colony, doranda, ranchi. - director table, "office table with leatherette desk pad, side runner and pedestal, size : 2200w x 1050d x 760h mm, material : mdf, colour : walnut.table top thickness : 80mm thick. a movable pedestal unit features 3 spacious drawers. a side runner to features 1 cabinet, 1 drawer, 1 shelf, a dedicated cpu shelf and a trolley. a keyboard trolley offers a clutter-free workspace.", ed table table size-(w) 1600mm x (d) 800mm x (h) 765mm, "800mm x (h) 765mm. featuring rich walnut and grey finish. complete with a movable drawer pedestal unit equipped with a dial-locking mechanism for added security. spacious tabletop offers ample workspace. includes a movable pedestal unit with three drawers and 1 cabinet offer generous storage.the product must be from a manufacturer having iso 9001,iso", gm table table size-(w) 1600mm x (d) 800mm x (h) 765mm, "400mm(d)x 660mm(h), (construction is 1 openable door + 1 open shelve for cpu back side have 3 holes ,in between both 1 key board tray with telescopic channel& 1 open box storage (l) 550mm x (h) 350mm from down 1-drawer . 2 drawers mobile pedestal of size 400mm(l)x 480mm(d)x 550mm(h) , having 2 drawers with castors in provided with cetnral lock for security and given curved shaped upper drawer are provided for easy of opening.overall construction of pedestal is 18 mm along with fecia of drawers. ", table size-(w) 1600mm x (d) 800mm x (h) 765mm, "made of prelaminated particle boardwith metal pedestal in top- maple,metal-ms metalpowder coated colorwith main table size 1650mm(l)x 900mm(d)x 750mm(h).", conference room table 30 seater, "providing & supplying u - shape modern design conference table & in between u shape , tabletop offers you a generous workspace,desk primary work surface use premium quality materials table top made of 25 mm thick which give more surface area for work ,machine made modular furniture made prelaminated particle board of grade ii type iii of is 12823/latest,* construction provision of conference tabletop supported with 18mm thick side pannels in brown-black oak colour made by prelaminated particle board and below the top 18mm thick prelam particle board modesty panel. exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue. ", executive chair, "high back natural leather chair in black colour with matte finish specification : type :high back 360° degre revolving chair ,all over size : 673mm(l)x 508mm(d)x 1270mm(h) ,the chair made of full natural leather in black colour .must be extra padded designed for more confirmt at workplace in contemporary style .details :arms : wooden arms with lether padding arm rest are fitted to the seat & back .* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) .seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat . back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back .backrest support foam design based on symmetrical lumbar support* mechanism : multi-locking knee tilt mechanism . seat maximum height is 580mm & minimum height is 500mm & back height from floor maximum height is 1270mm & minimum height is 1219mm* gas lift 80mm telescopic haudraulic * base : the prong (base) to be polished and fitted with 5 numbers. twin wheel castors (castor wheel dia. 50mm) & 700mm pitch center dia (740mm with castors)" , executive chair, " high back natural leather chair in black colour specification : * high back 360° degre revolving chair ,* all over size : 650mm(l)x 480mm(d)x 1300mm(h) ,*the chair to be made of full natural leather in black colour .* arms : chrome finish arm rest covering with natural leather pad.* use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 fo

CTN :45323635

08 Jun, 2026 42.03 Lacs

Azamgarh - Uttar Pradesh

Tender For construction of pmc work from the village karimuddinpur pitch road to banvasi basti road via north chhotelal inter college. (length- 800 m)

CTN :45133685

30 May, 2026 94.08 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : under district ambedkarnagar, the construction work of the road from bhiti mahruwa pitch road to subraha parvarbhari pitch, lot no 8

CTN :45133703

30 May, 2026 47.47 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : under district ambedkarnagar, construction work of road from village bharha minor to janardanpur pitch road in block tanda, lot no 10

CTN :45133704

30 May, 2026 53.48 Lacs

Faizabad - Uttar Pradesh

Tender For corrigendum : under district ambedkarnagar, construction work of road from hathpakad pitch road to jogiadih, lot no 7

Central Government/Public Sector

CTN :45228046

26 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 19 )items as given below ,[1] disman,floor plate 100.000 ea,[2] disman,damaged pitch chain assy,6in 1000.000 ft,[3] remvng,swarf frm chain head&tail end 12.000 to,[4] remvng,muck after digging frm entire pit 450.000 ft3,[5] disman,damaged track angle etc of chain 1000.000 ft,[6] brkg,concrete of damaged base bolt 4.000 ft3,[7] replaced.,damaged fdn bolts 55.000 ea,[8] concreting 4.000 ft3,[9] replcg,damaged support str 3.500 to,[10] modn,track angle 1000.000 ft,[11] ern,entire chain length 500.000 ft,[12] assyg,chain,lg20 500.000 ft,[13] svcg,driving&non-driving assy 4.000 ea,[14] svcg,drive g/box assy 1.000 ea,[15] replcg,dischrg&entry chute 2.000 to,[16] mkg,endless chain 1.000 set,[17] wldg,ern,big&small straps 100.000 ea,[18] svcg,conv side guard chain assy,8 week 180.000 ea,[19] streng,headend drive str,wheel main conv 1.500 to

State Government

CTN :45278808

27 May, 2026 1.90 Lacs

Udaipur - Rajasthan

Tender For work of watering in plants at sports area, cleaning and maintenance of gymnasium and table tennis court, rolling of cricket pitch, cutting of grass at ground during may, 2026 to january, 2027 (nine month)

Central Verge Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

State Government