Latest centre stiffener Tenders | Government centre stiffener Tenders

CTN :42869438

15 Dec, 2025 28.95 Lacs

Pulwama - Jammu And Kashmir

Tender For corrigendum : construction of 1 no. normal raft type tower foundation and supply, erection of tower material and supply, laying and stringing of 0.2acsr conductor with hardware fittings at igc lassipora of 132 kv d/c lassipora-shopian transmission line

State Government

CTN :43053941

18 Dec, 2025 2.03 Lacs

Multi City - Karnataka

Tender For the brief scope of work includes supply, installation, and testing and commissioning of 20hp submersible dewatering pump along with modification of existing pipelines at station dewatering sump of bgs. the list of works mentioned below are only indicative and all other incidental works in supply, installation, testing & commissioning of 20hp submersible de-watering pump to lbph of bhadra generating station are automatically covered in this scope of work.supply of 01 no of 20hp submersible dewatering pump as per technical specification.supply & installation of rubber/metal ss304 bellow to avoid the vibration for 20 hp.supply of 30mtrs l0sqmmx4c copper armored / flexiblecable for 20hp/25hp pump.installation, modification, testing and commissioning of 20hp pump & cable along with required modifications in the existing pipeline, along with all required materials like fastners. gaskets etc.supply of bolts, nuts and additional flanges required for modifications and hardware items.technical specification of the 20hp submersible pump.make-kirloskar /crompton/v-guard,liquid to be pumped -water,temperature / sp. gravity-ambient / 1.0,discharge-2200 lpm to 1800 lpm,total head-27 to 50 mtrs,pump type -submersible,pump outlet size-6.0 inches,motor rating-20hp,rpm-2900,material of construction -standard with bronze / gun metal impeller,power supply-3 phase, 415volts, 50hz.

Co-operative

CTN :43005067

10 Dec, 2025 3.31 Lacs

Mehsana - Gujarat

Tender For supply of hardware item - 3000608, 59.400, size per roll 200 square feet4*50ft 200 square feet200/10.76 18.53 sqmeter 18.53*5 92.93 m2total- 5 rollmaterial- material ss 304 ss hardware,mosquito net,ss,16 x 26,deepak, 3035709, 59.400, plywood,commercial,is-330,8 x 4ft,19mm 59.46 m2 (20 sheet) our section demandhardwer material required for civil maintenance work for dsd mehsana,all cc,all cfp & psk jagudan., 3039349, 59.400, 12 mm thick commercial plywood total 20 nos sheet, 3039346, 59.400, adhesive,synthetic resin,1kg,fevicol tin-20s h fevicol-20 tin( 1kg pre tin)total 20kgs h fevicol, 3054854, 20.000, hardware latch,ms,12 x 250mm, 3207068, 100.000, chapras - 3 in, 3207066, 100.000, carriage bolt size 4 "use :- aldrop lagava mate carriage bolt, 3035502, 5.000, hardware,nail,with head,17gauge,1in,ms 5ea 5 kgwith head, 3035500, 5.000, 5ea 5 kg, 3035498, 5.000, 1 pac 1 kgtotal -5 kg, 3135344, 40.000, drawer slides 16" channel telescope for furniture total 40 nos pear

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

State Government

CTN :42870892

12 Dec, 2025 NA

Multi City - Andhra Pradesh

Tender For general consumables and hardware for mechanical sub division/ dph - grinding wheels size 100 x 6 x 16 mm make bosh, cutting wheels size 150 x 1 . 2 x 16 mm make bosh, bosch professional bench grinding wheel , 8 inch , 200 mm 36 grit medium with 32 mm bore , suitable for machine model of gbg 60 by 20 , bosch professional bench grinding wheel , 8 inch , 200 mm 60 grit fine with 32 mm bore , suitable for machine model of gbg 60 by 20 , 3 mm rubber gasket of width 120 mm of good quality, 5 ton double ply webbling slings lifting belt of length 4 meter make ferreterro, qathaal brand multi purpose high tempered iron steel knife with wooden handle for trimming of tree branches, phython pro wood chopping indestructable nylon fiberglass handle ( 440 gms of 14 inch ), phython pro wood chopping indestructable nylon fiberglass handle ( 680 gms of 17 . 5 inch ), 3 by 4 inch pvc nylon braided water pipe each bundle 100 mtrs, m seal, emery paper smooth, emery paper rough size 30 grit, 2 in 1 lubricant oil, ring spanner 36 mm size, double end open spanner 36 mm size, hammer 1 . 5 kgs, taparia philips screw driver 18 inches, water taps, sickels big size, nuts and bolts with washers pwdsr sl no 564 of pg no a 29, anabond ( 85 gm pack ), 2 mm thickness oil seal ( gasket ), 5 mm thickness water seal ( gasket ), 3 in 1 servo mesh sp 320 gear oil, ball bearings 6306 2 z, ball bearings 6305 2 z, bolts and nuts ( as per sample ), skf wheel bearing grease, flexible pipe , 3 by 4 inch , nylon rope 3 by 4 inch, welding goggles black colour, welding glasses white colour, welding glasses black colour, rustolene liquid half litre bottles, rustolene spray wd 40 , 420 ml, cutting wheels 4 inch of make bosch , box of 25 nos, emery buffing wheels , size 4 inch , make bosch, supreme teflon tape ptfe , box of 10 pieces, anabond gasket paste, shallock, emery paper nice of grit 400, 2 mm epdm rubber o ring, 3 mm epdm rubber o ring, 4 mm epdm rubber o ring, 5 mm epdm rubber o ring, 6 mm epdm rubber o ring, 2 mm champion 59 oil gasket, 3 mm champion 59 oil gasket, 1 inch heavy duty green hose pipe , length 30 mtr, 1 quarter inch heavy duty green hose pipe , length 30 mtr, 1 half inch heavy duty green hose pipe , length 30 mtr, 10 mm ptfe gland packing square type , length 5 mtrs, 12 mm ptfe gland packing square type , length 5 mtrs, ultraflon ptfe gland packing of size 25 x 25 mm of make sra or champion , style 3 ( square type ), 2 inch hose clamps, 1 and half inch hose clamps, 1 quarter inch hose clamps, 1 inch hose clamps, half inch x 4 inch gi nippes of isi standards, 1 inch x 6 inch gi nippes of isi standards, 1 quarter inch x 6 inch gi nippes of isi standards, 1and half inch x 6 inch gi nippes of isi standards, 3 by 4 inch gi reducers isi standards, 1 and half inch gi t, 1 inch gi reducers of isi standards, 1 and half inch ms hose nipples of isi standards, 1 inch ms s type hose nipples of isi standards, 1 and half inch ms t type hose nipples of isi standards, ss bolt and lock nut , double washer ss , full thread of length 85 mm , diameter of 26 mm , material ss 304, ht bolt and nut , full thread , double washer , length of 160 mm , dia 12 mm, gate valves of material cast iron , flange end to end of 180 mm including rise , pcd of 160 mm , number of holes is 4 , hole dia is 18 mm, grease nipples as per sample

corporations/Associations/Others

CTN :42669201

06 Dec, 2025 41.93 Lacs

Vadodara - Gujarat

Tender For corrigendum : work of replacement of acsr dog conductors & earthwire between gantry of gotri to loc. no. 25 with hardware and sri of 66 kv gotri - koyali d/c line including stringing restringing approved under r&m 2020-21 & dismantalling of existing d/c 09 nos. of tower & erection of new towers (between loc. no. 15 to loc. no.23) of 66 kv gotri-koyali d/c line approved under r&m 2024-25 with buy back of olm (old line material) under cold line condition under gotri tr. division.

CTN :42937342

16 Dec, 2025 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material ht lt tand p equipments hardware items etc for std udhampur - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, a)33 kv 3 core xlpe armoured cable 300 sqmm, b)33 kv 3 core xlpe armoured cable 240 sqmm, b)33 kv 3 core xlpe armoured cable 185 sqmm, 33 kv ab cable 185 sq mm (3 x 185 + 1 x 120), c) 11 kv single-core xlpe armoured cable 630 mm2, d) 11 kv 3-core xlpe armoured cable 400 mm2, e) 11 kv 3-core xlpe armoured cable 300 mm2, f) 11 kv 3-core xlpe armoured cable 240 mm2, g) 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), lt xlpe al cable 4 core cu armoured 16mm , 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, a) cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), b) cable termination kits 33 kv heat shrinkable outdoor type 240 sqmm (single core), c) cable termination kits 33 kv heat shrinkable outdoor type 185 sqmm (single core), d)33 kv cable straight through joints heat shrinkable 300 sqmm -3 core, e) 33 kv cable straight through joints heat shrinkable 240 sqmm -3 core, f) 33 kv cable straight through joints heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a) cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, a)11 kv cable straight through joints heat shrinkable 630 sqmm - 3 core, b)11 kv cable straight through joints heat shrinkable 400 sqmm - 3 core, c)11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, d)11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable (copper), a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & batery bank & ac / dc distribution board, a) 36 volts battery bank 100 ah, 2 v, 18 nos cells complete with all accessories .make :- exide, amaron,tata or equivalent., b) 30 amp manually operated battery charger.- float cum boost with test certificate (cpri, nabl), c) maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, d) 32 v battery charger automatic (float & boost) compatible for vrla batteries, distribution panel (30 v, dc) made of crca thickness not less than 2mm. powder coated, degree of protection ip43 for 2 no battery incoming supply with 2 no 63 amps dp mcbs for incoming supply double busbar of adequate size, 12 no dp dc mcb (0-32a) including indication lamps and cables and other accessories, distribution panel (415 v, ac) made of crca thickness not less than 2mm. powder coated, degree of protection ip43. 200 amps switch fuse disconnector for incoming supply and 5 no tpn mcbs (16-125 amps ) and 5 no dp mcbs (0-32a), rectangular busbar suitable for 200 amps continuous supply including indication lamps and cables and other accessories, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or

CTN :42954199

17 Dec, 2025 NA

Becharaji - Gujarat

Tender For rate contract for stationery items , xerox and lamination work , printing work , computer items , cartridge reilling , cctv maintenance , tent edcoration , catering service , videography and photography , hoardings , banners , electric items , pvc and hardware material , etc.

Central Government And Public Sector

CTN :42975823

04 Dec, 2025 NA

Guwahati - Assam

Tender For supply of propeller type ac ventilating fan (exhau [propeller type ac ventilating fan (exhaust fan) of size 300mm, capacitor type, rated voltage-240v, frequency 50+- 2hz, insulation material class class b, motor enclosure-totally enclosed type, along with guard and other accessories such as frame, legs set, rubber clamps & other hardware etc, conforming to is 2312-1967 with all amendments ( reaffirmed 2020) and isi mark.]

Centre Stiffener Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Co-operative

corporations/Associations/Others

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government And Public Sector