Latest centrifugal fan Tenders | Government centrifugal fan Tenders

Central Government/Public Sector

CTN :45404408

10 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply and installation of single inlet centrifugal fan suitable for 3-phase, 415v ac, along with ducting arrangement for pantry in vande bharat trainsets. special note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated.01.04.2025, as per drawing: edts331, rev. a, corr-1,2 and 3. (type-iii), packing instruction: alternator,rru, erru &accessories, transformer,bulk inverters , battery, charger, self priming monoblock pump, inverter, change over control box etc: suitably covered with biodegradable transparent polythene and packed in wooden cage: bottom frame to be made of wooden planks 20mm thick &should have support of at least 3 wooden battons of size 100x100mm of suitable length to facilitate lifting by fork lifter. each panel to be packed in wooden cage of suitable dimensions made out of wooden strips of 20x100mm size. gap between each strip should not be more then 100mm. the material used for product packaging shall be eco-friendly.a list should be pasted on each wooden cage showing order no, pl no, description of the item, drg. no/ spec. no ,qty, firm's name &address and date of despatch etc. note- 1) firms have option to provide qr code. for linkage of po, the cardboard box shall carry a qr code having details as listed below: a) name of the manufacturer b) purchaseorder number c) purchaseorder date d) uniqueserial number (or lot number for bulk items) of the manufacturer or e) dateof manufacture f) deliverychallan no. g) deliverychallan date 2.the qr code shall beas per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45333060

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of cover , diaphragm , washer , base complete , ring sealing , sealing ring for set w6 , rubber bellows , multi led t5.5 k24 gn , male connector , delivery valve , push button , switch , parts kit , stud , nut , grooved pin , fuse 3a fk2 , key top cover green f/pan 1-01 , temprature gauge , oil pump , relay 30a 24vdc , pressure gauge , pressure gauge , pressure gauge , pressure gauge , 0-2400 tachometer , automatic cutout 2 oa10045345510 , automatic cutout 8 0a 0045346010 , switch , pressure sensor 0-64 bar , cylindrical pin , washer a , oil control ring st w6 , stud , screw , power indicator electric , power indicator 10-0-10/gn-rt , mpc1-01 card f/computer a.741620/741634 , plug-in board , mfb 1 , plug-in-board , plug-in board , panel for control panel , axial bearing , comp.wheel zr 195 , ring snap , carbon scrapper ring , con.rod brg.upper half , bushing con rod 75.00 , trust member , stop , fuel delivery pump , gasket for set w6 , bolt cylinder head , cylinder , bearing bushing , connection housing f/control lever , volute , housing emu 1-01-c , modular system , plug-in-board not adjusted , sealing ring , sealing ring 150x7.3 , gasket , tab washer , o ring , o-ring , o - ring , o ring , cylinder roller bearing , hose , gasket , gasket for set w5 , gasket for set w5 , ball 16mm , locking ring , compensating ring , valve , gasket , sealing cone 22mbn 15005 , injector , piston , diode in4004 , end cover , roller diaphagram , filter element , washer , speed transmitter_0001539620 , piston , semi rotary hand pump , incandescent lamp , temperature sensor pt1000 , speed sensor br4000 nw , hex nut , main engine lub oil priming pump , fuse 30a fk2 , fuse 1a fk2 , pressure gauge 0-6 bar , relay 12v / 150a , relay base , pressure sensor , pressure sensor 15 bar , pressure sensor 10bar , pressure sensor , thermal actuator , pressure hose , cylinder liner , sealant pipe thread loctite 586 , eprom , eprom , mcu 1-04 computer , plug-in board , module cob 8-01 , piston ring , oil separator , nut , washer thrust , bolt hex cyl hd , tube injector , valve spring , nut hex fuel rail m42 1 5 , exhaust bellow , sea water pump , coolant pump , shaft wtr pmp hi temp clg circuit , plug in board , plug in board , plug in board bob 1 02 a , o ring , o ring , o ring , o ring 100 4mm , oring for set w5 , o ring , o ring , gasket , paper pack centrifugal spinner filter , vaccum guage , gasket , control block , conversion kit f series 4000 5205304531 , cylinder head , vacuum indicator , washer , crankshaft bearing size 0 0 s s 5240336101 , control lever ros 2-05fpp , control lever , oil spray nozzle , servo-locker , corrosion inhibitor conc. coolant cs100 , diff-press monitor , level monitor , level monitor , pressure sensor , snap ring , conrod bearing size 0-0 s sx00040714 , seal ring s s 5240160319 , pushrod , flow restric valve , cam shaft , washer , button caps , bearing camshaft std , plug-in board , switch e-stop45mm w/self monitorngco , valve , plug in board , link , centrifugal oil fl tr

CTN :45333094

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of gasket kit , o-ring for set w5 , end plate , o-ring , stud , bearing angular contact roller , first plate , o ring 26 x 2.5 mmn 294 , o-ring , o-ring , seal oil , exh pipe bellows , contam indicator , fuel filter , o ring , gasket , cover for solars , clamp , 0-2200 1/min tachometer , corrosion inhibitor conc. coolant cs100 , gasket , spare part kit for fuel filter , oil filter (element) , 0-2400 tachometer , o-ring , washer a 16 , o-ring 60x4 for set w5 , gasket , bolt hex gal cu 5 bk , panel , diaphragm , diaphgarm , insert (crank case breather) , actuating cylinder , bush , isolator 60 sh rd314b , plug in board , nut , intercooler(a bank) , exhaust bellow , valve , sealing ring , o ring , bolt adjusting , valve exhaust std floating bridge , push rod , gasket for set w5 , stud , gasket , sealing ring for set w5 , cylinder head complete , oil separator , seal ring , pan2-01 panel , ring seal asm , shield heat turbo , flow restric valve , paper pack centrifugal spinner filter , o-ring 11.3x2.2 for set w6 , axial bearing , tester , o-ring , control lever ros 2-05/fpp , panel , pan1-01 panel , gasket kit , sealing ring for set w6 , panel , air starter , bearing body , seal oil 48x72x8 mnn386 , seawater pump , washer , coolant pump high-temp circuit , nut , washer , odr 2-02 computer , clamp , y-gasket vib.damper , mpc1-01 computer , end plate , air filter , rubber bellows , gasket for set w5 , gasket for set w5 , hylomer sq 32m , rubber bellows , coupling , o ring , end plate , connector , conical spr. washer , base complete , rubber bellows (s s 0002035083) , clamp , turbine wheel , tube injector , arm rocker intake , swing foll , trust member , cylinder , disc , compensating washer , washer , screw , cylinder head , injector , water pump high temp circuit , exhaust turbocharger lift side , cylinder head complete , servo-locker , plug - in board , wiring harness for on-engine sensor , shaft

CTN :45116510

27 May, 2026 NA

Malda - West Bengal

Tender For supply, installation, testing and commissioning of air washer unit consists the following : (i) air cooling machine of capacity 51,000 cmh with 2 nos. centrifugal fans (1 no. working & 1 no. stand by), 2 nos. 15 kw electric motors (1 working one standby), v-belt drive for both the fans, celdek pads, 4 bend pvc eliminators, water pump 0.75 kw (1w+1s), water distribution system with pumps, piping?s, valves etc., air intake filters, g.i. air intake louvers,fan outlet electrically operated actuator dampers and complete in all respect as per spec. (ii) supply with erection of of g.i. ducting- supply air-(a) 0.8 mm ( 22 swg )-160 sq. metre (b) 0.6 mm ( 24 swg )-175 sq. metre (iii) supply, erection and commissioning of supply air grill with vcd of size : 450 x 250 mm-21 nos (iv) supply, installation and commissioning of volume control dampers-2 sq.metre. (v)supply and erection of structural m s support for ducts -500 kg. (vi) supply and erection of gravity air louver size: 300 x 300 mm for exhaust system-21 nos. (vii)supply, erection and commissioning of starter panel drivers -01 set [ warranty period: 36 months after the date of delivery ]

Central Government And Public Sector

CTN :45261071

10 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of ups centrifugal fan

CTN :45071824

29 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of centrifugal fan of 26500cmh capacity and 800mmwg as per attached annexure , spare impeller along with shaft for centrifugal fan of 26500cmh capacity and 800mmwg as per annexure

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

Central Government / Public Sector

CTN :44846143

11 May, 2026 56.00 Lacs

Hyderabad-T - Telangana

Tender For supply of centrifuge : - centrifuges , centrifugal separator , swing out swing bucket rotor , adapters for 15 ml conical tubes , adapters for 50 ml conical tubes , adapters for 15 ml round bottom tubes , multi well plate buckets for swing rotor , fixed angle high speed rotor 5 - 50 ml class , adapters for 15 ml conical tubes for fixed rotor , multi channel air cushion pipette with variable volume and adjustable tip spacing option , electronic positive displacement pipette dispenser , advanced positive displacement dispenser tips , mechanical air cushion single channel micropipettes variable volume 50 1000 , mechanical air cushion single channel micropipettes variable volume 10 200 , mechanical air cushion single channel micropipettes variable volume 1 20 , electronic air cushion single channel pipette for precision and reproducibility variable volume 5 100 , electronic multi channel pipette system for precision and reproducibility variable volume 5 100 , rotating pipette stand carousel

Central Government And Public Sector

CTN :44479148

13 Apr, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of 1 supply of fan module 240v ac, 3 fans with fan failure detection as per details specification given in annexure 1 , 2 supply of spare fan single phase 240vac, 50hz, rpm 2850 compatible for use in item no 1 , 3 supply of fan module 240v ac, 7 fans with fan failure detection as per details specification given in annexure 1 , 4 supply of spare fan rpm 5700rpm, 84 1 cfm compatible for use in item no 3 , 5 supply of spare top exhaust fan rpm 3600rpm compatible for use in item no 3 , 6 supply of centrifugal fan single phase fan, nominal voltage 230 vac, frequency 50 hz, speed rpm 2350 , 7 supply of exhaust fan single phase fan, nominal voltage 230vac , frequency 50hz, speed rpm per min 2700 , power consumption 70 w , 8 supply of panel cooling fan single phase, nominal voltage 230v ac, 50hz, speed rpm 2550, power consumption 64w , 9 supply of pcb cooling fan 160cubic meter per hour air flow or better, 230v, 50hz, 20w, 2650rpm and other details as per annexure 1

Centrifugal Fan Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government And Public Sector