Latest centrifugal monoblock pump Tenders | Government centrifugal monoblock pump Tenders

corporations/Associations/Others

CTN :45723624

02 Jul, 2026 6.00 Lacs

Salem - Tamil Nadu

Tender For supply delivery and fixing of motor and accessories at ward-1 selliyampalayam oht in narasingapuram municipality - supply and delivery of kirloskar make 15hp/11kw/2900rpm three phase/415v/50hz/ac/tefc horizontal centrifugal monoblock pump impeller-mechanical seal (head-20mtr,flow rate-2154lpm) size:100x100mm (local quotation) 15hp horizontal centrifugal monoblock pump, labour charges for erection of horizontal shaft, centrifugal pumpset (coupled/monoblock) in bore well/open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of tpic switches starter, voltmeter, ammeter, capacitor single phasing preventor and laying and jointing the cables and twinearthing as per ie rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by eb authorities., three phase panel board star- delta with two level guard and auto start supply and delivery of star-delta starter confirming to is 13947, iec60947-1 and as amended thereafter with suitable kw rating for operation in ac/ three phase/50hz (+/- 5%) and 415v (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., ct operated ammeter (65 mm dia) with suppressed scale,voltmeter (65mm dia),voltmeter selector switch,miniature circuit breaker, thermal overload relay, air break contactors suitable for next standard higher kw rating, single phasing preventor, dry running preventor and on/off push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capa citor is to be taken separately). three phase panel board for 15hp, supply,delivery and fixing of the following materials are listed below etc..,as directed by the departmental ofiicers.for service4 core 16sq.mm pvc copper ug cable, for motor3 core 6sq.mm pvc insulated and sheathed flat type copper cable, 150mm di pipe, 100mm gi pipe , 100mm gi flange set, rubber sheet for flange set, ms bolt and nut20mm dia and above x 90mm to120mm length fully threaded bolts andwith nuts 2 nos. , manhole cover 60 x 60cm (heavy duty) with frame, supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary ms flange of table e , gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the departmental officers. 150mm sluice valve, 100amps 4pole mcb, 100amps porcelain fuse unit (500v), 32mm pipe

Central Government And Public Sector

CTN :45714795

01 Jul, 2026 NA

Bhatapara - Chhattisgarh

Tender For supply of single phase 230v 50 hz, 1 hp self priming centrifugal monoblock pumpset with motor (as per is 5120 latest) rpm 2500-3000 , body high-quality aluminium die cast, shaft-stainless steel,impeller-bronze, winding-copper with suitable starter panel having overload, dryrun, undervolt, overvolt protections, voltmeter, ammeter,indications [ warranty period: 30 months after the date of delivery ] ]

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45675369

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 01 defective battery charger of 220amp, make ¿ signotron (india) pvt ltd. 01 no. 02 released emergency battery charger 4 nos. 03 released regulated battery charger 08 nos. 04 scrap tension rod complete 04 05 scrap blower motor, 1.5 hp, 1400 rpm (lhb) 19 nos. 06 scrap rru 4.5 kw for tl coach 8 07 scrap condenser fan motor, 1 hp, 1400 rpm (lhb) 43 nos. 08 released bldc fan 400 mm sweep 180 nos. 09 scrap condenser fan motor, 1 hp (old) 01 nos. 10 released battery 120 ah, 6-volt vrla 12 nos. 11 released fire extinguisher 06 nos. 12 scrap condenser motor for icf type coaches 21 13 scrap dc motor for motoring. 1 14 released carriage fan 110 v ac 400 mm sweep 6 nos. 15 released led type emergency light (icf coach) 21 nos. 16 released led type emergency light (lhb coach) 24 nos. 17 released element lub oil filter 16 nos. 18 released air filter (inner & outer) 22 set 19 released mono pump frame 11 nos. 20 released tail lamp for icf type slr coach 15 nos. 21 released c check kit 29 set 22 released monoblock pump controller 18 nos. 23 released dynamo belt 7 nos. 24 released iv coupler 12 nos. 25 released water pump for cd engine 1 no. 26 released solid state inverter electronics 155 nos. 27 released feeder junction box 2 set 28 scrap electronic ballast watt 436 nos. 29 scrap lavatory light fittings 53 nos. 30 scrap led tube light fittings 81 nos. 31 released berth reading light (lhb) 16 nos. 32 released 24-volt starter battery charger 01 no. 33 released monoblock pump 0.5 hp 15 nos. 34 released brushless alternator 4.5 kw 14 nos. 35 released radiator core 6 lane copper core size -53¿x 48¿ (part-i & ii inside & outside) 01 no. 36 released axle pulley 4.5 kw, 13 ton 04 no. total ferrous - 6.3mt, total copper - 390 kg, al- 10 kg, lead - 54 kg

CTN :45675375

09 Jul, 2026 NA

Multi City - Bihar

Tender For auction sale of others - 1 scrap battery plate 105 nos. 2 scrap nylon hand bag containing 1 no. lt motor , 500 volt mark w acd and one electric bulb of 60 volt- 1 no. 3 liquid level cum moisture indicator 2 nos. 4 temperature sensor fa 3 nos. 5 temperature sensor fa /ra 10 nos. 6 cleaning agent 510-d, return filter and fresh cassette filter 86 nos. 7 released supply air duct complete with frame associated accessories 20 nos. 8 scrap carriage fan ac (95-135 volt), 400 mm sweep 47 nos. 9 set of 2 nos. return air duct complete with frame 7 nos. 10 mpcb for ventilation fan unit 29 nos. 11 mpcb for compressor unit range 16 amp 13 nos. 12 mpcb for condenser fan unit range 2.5 amp 15 nos. 13 fresh air duct complete with frame and associated accessories. 4 nos. 14 contactor for 60 kva transformer 4 nos. 15 feeder contactor 750 vo9lt 200 amp for net-1 & 2 2 nos. 16 thermostat switch 4 nos. 17 axle pulley 4.5 kw, 13 ton 4 nos. 18 berth light fittings 5 nos. 19 vane relay 9 nos. 20 control transformer 10 nos. 21 control harness, male portion 7 nos. 22 condenser fan 25 nos. 23 16 amp contactor 44 nos. 24 copper capillary with strainer 8 nos. 25 overload protection relay 39 nos. 26 timer (0.5 to 180 sec) 27 nos. 27 isolation transformer, 415 v/110 v, 500 va 5 nos. 28 control harness ( 2.5 mtr complete with 37 pin) 2 nos. 29 accumulator 3 nos. 30 contactor, 30/32 amp 36 nos. 31 mcb, 2, 6, 10 & 16 amp 53 nos. 32 ohp cutout 65 nos. 33 power cable harness including all wires 3 nos. 34 rotary switch 40 amp 74 nos. 35 mobile charging point 125 nos. 36 ballast for 11 w cfl 69 nos. 37 water pump 1 no. 38 non-return valve 2 nos. 39 ¿ c- check kit 29 nos. 40 valve guide 8 nos. 41 intake valve 12 nos. 42 mcb 32 amp 19 nos. total battery plate - 5565 kg, ferrous 245 kg

Central Government/Public Sector

CTN :45593622

25 Jun, 2026 NA

Tirunelveli - Tamil Nadu

Tender For corrigendum : supply of single phase 230v 50 hz, 1 hp self priming centrifugal monoblock pumpset with motor (as per is 5120 latest) rpm 2500-3000 , body high-quality aluminium die cast, shaft-stainless steel,impeller-bronze, winding-copper with suitable starter panel having overload, dryrun, undervolt, overvolt protections, voltmeter, ammeter,indications [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45640697

13 Jul, 2026 2.35 Lacs

Alwar - Rajasthan

Tender For providing, installation, testing and commissioning of centrifugal monoblock pump set in rwss harsoli under subdivision kotkasim of division bhiwadi

State Government

CTN :45641768

13 Jul, 2026 2.35 Lacs

Alwar - Rajasthan

Tender For providing, installation, testing commissioning of centrifugal monoblock pump set in rwss harsoli under subdivision kotkasim of division bhiwadi ncr

Central Government/Public Sector

CTN :45637757

29 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-98116, type-wgaccn, railway-wcr, built year-1998 with availbale ferrous-non ferrous excluding reclaim items. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a) list -missing items :-1. u/f wiring missing=20 kg(copper) 2. inverter(copper in each 18 kg)= 02 nos. 3. pre cooling transformer(copper)=70 kg 4. wra pump(copper in each 0.25 kg)=02 nos. (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. b.toilet fan-03 nos and total weight-1.2kg. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. part delivery on part payment is not allowed. delivery will be given by nos only. cutting allowed for easy loading. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)material lying in rajasthan state.

Centrifugal Monoblock Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector