Get complete information related to latest Ceramic Coating Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ceramic Coating Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ceramic Coating Tenders.
Tender For corrigendum : tender for supply of electrical consumable and miscellaneous items for hurl sindri c - cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-100mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-200mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length 300mm, material nylon 66, pack size 100. electrical contact cleaner spray, quick dry, packing size for liquid(ml)-500ml galvanized zinc spray, finish type-bright silver, zinc-enriched coating to repair surface damage protection against corrosion, special feature-rust resistance, packing size for liquid(ml)-500ml. silica gel, colour of silica gel-blue, particle size -9 to 12 mm, air tight container for packing of silica gel-plastic. silicon sealant, physical state- viscous paste, appearance-translucent/ opaque, color-clear/black/white/gray, surface cure-5-10 min, packing size(ml)-300ml m-seal, shelf life 12 months, hardness 75-80, impact strength - 2.5 * 3kg / c * m setting time at 30 deg c min-60 min, working temp limit 80 deg. c component resin and hardness, packaging size-1 kg gap filling pu foam spray(puf seal), application fill the gap between wall & tray, conduit pipe and wire sealing, packing size for liquid(ml)-750ml. silicon sealant gun, feed type: push-fed gun, type: cordless-corded glue gun pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour red, length-6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive- rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour yellow, length 6.5 mtr, voltage resistance-lipto 600v. pvc tape, material-pvc, adhesive- rubber bases adhesive, adhesive side-single side, temperature range (-40 degree c to 125 degree c), colour blue, length 6.5 mtr, voltage resistance-upto 600v pvc tape, material -pvc, adhesive rubber bases adhesive, adhesive side- single side, temperature range(-40 degree c to 125 degree c), colour-black, length 6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour green, length 6.5 mtr, voltage resistance upto goov ht-tape, self bonding electric tape, for high-voltage(upto 69kv), corona and ozone resistant, moisture and corrosion resistant, overload temperature 130 deg. c. roll size 9.15 meters. teflon tape, packing type-piece, elongation % 50-60, length of tape-9 mtr, application of colour tape white al foil tape, color-sever, type-aluminium foil tape 2 inch, cello tape type single sided, tape dispenser type-high bond, self adhesive, cello tape roll size-15 meters waste cotton doth emery paper, grit size grit 40-60, material emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel. roll length-40 inch. emery paper, grit size-grit 220-400, material-emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel roll length 280 mn trubble gum, strong glue trap, type- glue board, container type-sachet, protection against-rats titanium putty, 1 kg 1.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 200 2.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 100 4 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 10 1.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 200 2.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 20
Tender For corrigendum : supply of body pillar part(bg)l.h to icf drg.no.icf-sk-1272 alt-f.item no.6.raw mat of 2.5 mm thickness to is-513-2008 grade-cr2. note: class c (light weight), phosphate coating as per is: 3618-1966, will be done on all exposed surface. specn: icf-sk-1272 ite [ warranty period: 30 months after the date of delivery ] ]
Tender For supply and application of powder coating for the existing foldable snack tables of vb train-18 coaches. (the scope covers, removing existing stickers, glue, existing powder coating/paint, surface preparation and application of fresh powder coating to ral no.7035) [ warranty period: 30 months after the date of delivery ] ]
Tender For pa/aicts/ 630/ms/rtd/dglp/echs/ote/11 /2025-26> - semi compliant ptca balloon catheter with hydrophylic coating with corrugated surface and low profile wig shape design 1.0mm, ptca rapid exchange scoring balloon with focussed force technology with dual wiring system
Tender For ame for supply of electrical materials for svac, svjc, svmdc, skehs & its hostels, sri vakulamatha temple and sv high school at vellore, temples, information centres in tamilnadu, pondicherry and kerala states etc. pertaining to ae-i section of esd-iii, tirupati for the year 2026-27 - supply, transportation and fixing of 36w recessed / surface mounting 2' x 2' (600x600 mm) led luminaire made of crca sheet housing with powder coated with acrylic diffuser, constant current driver as per is: 15885 (part 2/ sec 13) : 2012 , with operating voltage range of 150 to 265 volts ac, p.f > 0.9, surge protection: 2kv, thd<10%, with high power leds, having system efficacy of > 120 lumens / watt, cct: 3000k - 5700k, minimum cri>70, .etc., complete with earth connection and not less than two years warranty. a) luminaire make : phillips / ge-venture / crompton / wipro / bajaj / havells /halonix/jaquar/hpl/gm / greenlites / gold medal/eveready / fortunearrt/rhino/ panasonic b) led make : philips lumileds / cree / nichia / osram / samsung/everlight. , supply of??isi marked hrc fuse links as per is 13703-part 2/iec 60269- part 2 makes: makes: l & t / g e / c & s / standard / hpl / havells / siemens / indo asian , supply of???. isi marked frls/ frls-h / hffr / zhfr pvc insulated flexible copper cables 1100v grade as per is: 694/1990 & is:17048/2018 specification for copper cable. makes: finolex / rr kabel / havells kei/polycab/gloster/goldmedal/gm/ finecab/ fortune arrt/anchor/million , supply of no.8 screws of , supply of lamp with input voltage 90 to 300v, colour temparature 3000k-6500k, beam angle 170-220 degrees, b22 base, . makes: phillips /crompton / bajaj / havells / halonix/gm/hplsyska / green lites / fortune arrt / goldmedal / luker/leo/orbit /rhino / glo led , supply of 9w/10w led mirror light fitting with decorative grey end caps, polycarbonate body and opal acrylic diffuser etc. makes : philips/bajaj / crompton / havells/ hpl. , supply of 40a, 2 pole,30ma rccb for earth leakage protection. makes: legrand-dx3 / schneider-a9/hager-h3/ siemens-5sx4/ havells stadx/l&t-au/indo asian-opti pro/hpl(techno) , supply of 3 core????isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990. makes: finolex / rr kabel/ polycab / havells / kei/ gloster/ goldmedal / gm/ finecab/ million , supply of ???????. isi marked. makes: gm g home / gold medal olive / million zoom / great white omega/koncept/vimal opel/ anchor/vihan/cpl/ havells reo , supply of ????. isi marked makes: legrand (arteor/myrius) / schneider (clipsal x/ livia ab)/ crabtree murano or ducor/l&t-englaze/ gm-(four-five)/ goldmedal(gifa)/million (m-vee)/anchor roma (plus) , supply of ???., adjustable, confirms to iec 60947-2 and is 13947part 1 & 2, having breaking capacity ???. with thermal magnetic release panel mounted. makes: l&t- d shine / schneider-cvs/legrand ?(dp x3/drx)/ siemens- 3vl / hager-h3/c&s -winbreak/hpl-techno , supply of ??... isolator. makes: legrand-dx3 / schneider-a9/hager-h3/ siemens-5sx4/ havells stadx/l&t-au/indo asian-opti pro/hpl(techno) , supply of ?... porcelain rewireable fuse units. makes: c&s/standard /hpl/ sputnik / million / gold medal /gm/ benlo/anchor , supply of ?... 10ka c/d curve isi mark. makes: legrand-dx3 / schneider-a9/hager-h3/ siemens-5sx4/ havells stadx /l&t-au/indo asian-opti pro/ hpl (techno) , supply and transportation of 40w led post top lantern made with cast aluminum with decorative opal polycarbonate diffuser with ip 65 protection etc., complete with all accessories with not less than two years warranty. makes: crompton lpto-40-cdl-m/ bajaj celesta bgcl 40 w led wh/wipro lp 02 or equivalent in phillips/keselec/havells endura spring/rhino(gplp14) , supply and transportation of ........ led cob spotlight suitable for recessed mounting made of diecast aluminum body with powder coating, high efficiency reflector, with driver, operating voltage range of 150 to 265 volts
Tender For supply of surface protection coating for control arm in packing of 5 ltrs. make/brand - blasol 135 of m/s. blaser swiss lube or cortec vci-368 or molytec ep of m/s. stanvac chemicals india ltd. [ warrantyperiod: 30 months after the date of delivery ] ]
Tender For air receiver tank of capacity 4 meter cube (4000 liters) as per following technical specifications.size of the shell: -diameter =1260 mm. height of the shell=3150 mm. 1. service: compressed air 2. capacity: 4000 liters 3. orientation: vertical 4. working pressure: 7.0 kg / cm2g 5. operating pressure: 6.0 kg / cm2g 6. hydro test pressure: 10.5kg/ cm2g 7. working temperature: ambient 8. design temperature: ambient 9. vessel dimension: a) diameter: 1260 mm, b) shell length: 3150 mm 10. thickness: a) shell: 10mm, b) dish: 10mm 11. fabrication code: is-2825/asmesecviiidiv1 12.materialofconstruction:is2062oraspertherequirement. 13 .valve: 150mm ball valve- 2 qty (with each air receiver). valve make- valvora/norflow /l&t /normex. 14. surface coating: internal: anticorrosion coating, external: one coat red oxide primer and 2 coats of enamel paint. 15. accessories included: suitable safety valves and pressure gauge. note: (1) air receiver shall be hydraulically tested as per is-2825/asmesecviiidiv-1, and test certificate shall accompany the supply. (2) necessary material test & guarantee certificates shall be submitted. (3) warranty: 24 months from the date of commissioning. (4) proper name plate indicating capacity, serial number, mfg date, max working pressure, test pressure, make etc. shall be provided on the tank. (5)inspection agency: tpi agency at firms works before dispatch. [ warranty period: 24 months after the date of delivery ] ]
Tender For bid to ras supply of wooden paneling work for 12 by 10 room , tiles flooring complete material and finishing , aluminum work for front elevation and windows , electric wiring lights and electric accessories , curtains matting and interior finishing , exterior surface treatment and protective coating work , wooden paneling for front elevation including ladakh design , cupboard almirah and wooden shelves installation , pv paneling for rear wall , aluminum door installation , labour charges installation and final finishing
Tender For digital library in shree kuchaman pustakalay. kuchaman city - computer system setup (includes cpu, monitor, keyboard, mouse and accessories) cpuintel core i5- 08th gen processor with activated windows having 8 gb ram, 512 gb ssd, 450w power supplymonitor18" led 45 htz display having hdmi and vga portmouse and keyboardwired optical mouse and wired full numerical pyhysical keyboard(made of dell/lenovo/hp/asus), furniture counter (including table and chair) per personcounter: comfortable size for 20 persons having 32" heightchair: adjustable height wheel movable chair, air conditioners, split acs 1.5 tonwith installation and stabilizer(made of voltas/lg/samsung/lloyd), wi-fi router and internet connectionmulti network wi-fi router having high internet speed minimum 300 mbps, providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in-charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095-part i,, brick work with modular fly ash lime bricks (falg bricks) conforming to is:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in : cement mortar 1:6 (1 cement : 6 coarse sand), cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand), distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer., providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, p & f 1st quality heavy duty vitrified polished digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 1200 mm, providing and fixing fully panelled /partly panelled double leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per annexure a and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide