Get complete information related to latest Cfl Tube Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Cfl Tube Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Cfl Tube Tenders.
Tender For corrigendum : supply of intra aortic balon pump (iabp) (q3) , ultraviolet sterilizer for ot and iccu , central moniternig system , sugical loops 4.5x vision panaromic ttl , advance heart lung machine with temprature controle machine , hand held co- agulometer machine , cell saver , tourniquet esmarch type , non minimal invasive cardiac output monitor with pulmonary artery pressure measurement , washer disinfector , ot light ledtrple dome , surgical loops 2.5x3.5x , cardiac fibrillator , iv fluid warmer , ambu bag adult silicone , spot light led minor procedure , laryngoscope , portable eccho machine , vasccular doppler with wave form , haemodialysis machine hd hdf
Tender For street lighting and electric maintenance and improvement material supply work. for nagar palika parishad damoh - inviting rate for electric material as given in the list for the finacial year 2026-27, incandesent lamp, 4 pin cfl lamp 36 watt (pl-rod), t-5 rod 24 watt, electonic chock for street light 36 watt, electonic chock for street light 48 watt (2 24watt), cfl street light fixiture 36 watt, t-street light fixture 4 24, t-street light fixture 2 24, aluminium wire 4 mm, aluminium wire 6 mm, coper wire 1 mm, coper wire 2.5mm, led tube rod 22 watt with driver, led driver(street light) 50 watt, led fiood light driver 100 watt, led filood light for high mast 200 watt, bullb holder for pandent/angel, 2 pin holder for t-5 fixture, 4 pin holder for cfl fixture, steel gripe eletric tape, main switch 100 amp, main switch 200 amp, mccb 100 amp, mccb 32 amp, mccb 63 amp, swich board 10 module with switch with switches sockets, swich board 12 module with switch with switches sockets, switch board with 3 pin socket and switch, switch board with 5 pin socket and switch, call bell musical, mpp condenser for fan and cooler 440 v3.15 mfd, ceiling fan 60 watt 1400 mmsweep, wall mounting fan complete 300 mm sweep, exhaust fan 450 mm sweep 900 rpm, gl bracket for steet light 2 meter with nut bolt and complete fitting, pvc casing cappping pipe rectangular, casing pipe round, fountain light 30 watt, fountain light 50 watt, track light (focus) 30 watt, track light (focus) 50watt, decorative dom 300 mm to 600 mm, aluminium wire 1.5 mm, aluminium wire 2.5 mm, armored 2 core cabl 10 sqmm, armored 2 core cabl 16 sqmm, unarmored 2 core cable 10 sq mm, unarmored 2 core cable 16 sq mm, unarmored 3 core cable 16 sq mm, unarmored 3core cable 25 sq mm, unarmored 3 core cable 35 sq mm, unarmored 3 core cable 50 sq mm, armoured 3 core cable 16 sq mm, armoured 3 core cable 25 sq mm, armoured 3 core cable 35 sq mm, armoured 3 core cable 50 sq mm, armoured 4 core cable (xlpe) 16 sq mm, armoured 4 core cable ( xlpe) 35 sq mm, main switch 63 amp., main switch 400 amp., switch fuse unit triple pole with neutral 63 amp, switch fuse unit triple pole with neutral 100 amp, switch fuse unit triple pole with neutral 200 amp, mminiature circuit breaker.(mcb) single pole neutral 6 to 32 amp., mcb triple pole &neutral 6 to 32 amp., aluminium lugs 25 to 50 sq mm, copper lugs 25 to 50 sq mm., led limp/bulb 3 w, led limp/bulb 12 w, led limp/bulb 18 w, fan regulator 1000 w, cooler pump, cooler fan 450 mm, modular switch 6 a, modular switch 16 a, modular switch 32 a, regular switch 6 a, regular switch 16 a, regular switch 32 a, modular 3 pin socket 6 a, modular 3 pin socket 16 a, modular 3 pin socket 32 a, regular 3 pin socket 6 a, regular 3 pin socket1 6 a, regular 3 pin socket 32 a, led strip water proof 60 led per meter driver outdoor 24, power supply for led strip 24 w, power supply for led strip 75 w, submersible flat cable 3 core cu. wire 6 sq mm, submersible flat cable 3 core cu. wire 10 sq mm, cooler honey comb pad, inverter 1000 va., inverter 1000 va. ups., 4 pin pl (c.f.l.)tube 36 watt, switch contactor mnx 32, 3 pole 240 volt. 50hz 32 amp l&t made, switch contactor mnx 100, 3 pole 415 volt. 50hz l&t made, switch contactor mnx 25, 3 pole 240 volt. 50hz l&t made, switch contactor mnx 100, 3 pole 240 volt. 50hz l&t made, timer renowned make, mcb isolator suitable for 415 volt 50 hz pole 40 amp., mcb isolator suitable for 415 volt 50 hz pole 100 amp., mcbof "c" sries 415 volt 50 hz 10 ka, single pole 63 amp, steel 2 way swtich, destreil water for battery, extention bord 5 point with switch indicator 3 meter long copper cable
Tender For supply of compact fluorescent light fitting double for non ac coaches as per rcf's drg. no. cc-76423,alt.'c' without cfltube, ballast (item-5) and cover for ballast (item-22). [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of compact fluorescent light fitting complete suitable for 04 pin single cfltube as per rcf drawing no. cc 76215 alt-d. without ballast as now converted into led light. [ warranty period: 30months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For procurement of materials for repair of various components used in the fixing of light poles installed across of the failure different wards within municipal area - 61.13 p/l of double wall corrugated hdpe pipe confirming to is 16205 p-24, stiffness class 750 n, externally corrugated and having smooth surface inside with hdpe coupler, elbow, tee at required depth below the ground for laying cable of following nominal outer dia. mfr test report from nabl accrediated is to be submitted. (excavation of earth & back filling with compaction is to be paid extra) all as per pre approved by engineer in-charge.. for additional technical parameters of products/ work, refer annexure "a" attached with this bsr 50mm dia. , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured copper cable confirming to is:1554 p-i / is:7098 p -i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity >99.7%, inner/outer sheath confirming to is:5831 in existing rcc/hume/stoneware / pvc pipe/open duct/cable trench/cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure 'a' attached with this bsr 3 core , supplying and making one end termination with nickel plated heavy duty brass single compression gland (as per is 12943-1990)) sibg type consisting of check nut, gland body, metal washer(3 nos.), outer seal rubber ring, compression nut, heavy duty aluminium lugs (as per is 8309-1993) duly crimped with crimping tool, pvc tape as per is 8337-1976 of following size of pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in-charge. for additional technical parameters of products/work, refer annexure "a" attached with this bsr 4 x 10.0 sq.mm pvc tape roll , supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discom's specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure "a' attached with this bsr type a lt connector for aerial bunched cable each 73.00
Tender For procurement of internal electrification items at various worksites under amarpur/ ompi/ karbook/ silachari r d block and amarpur nagar panchayat area under gomati district, tripura (2nd call). - 20mm dia casing & capping made of presto/ precision, 25mm dia casing & capping made of presto/ precision, 25mm dia internal, elbow, external tee made of presto/ precision, pendent holder [isi] made of anchor/ cona, pvc bend isi marked, 32mm dia internal, elbow, external tee made of presto/ precision, angle holder [isi] anchor/ cona isi marked, 32 mm dia pvc conduit pipe isi marked, batten holder [isi] made of anchor/ cona, ceiling rose [isi] made of anchor/ cona, 5 amp switch [isi] made of anchor/cona, 3 pin 5 amp socket [isi] made of anchor/ cona, 15 amp switch [isi] made of anchor/ cona, 3 pin 15 amp socket [isi] made of anchor/ cona, 15 amp combined switch socket [isi] made of anchor/ cona, indicator switch [isi] made of anchor/ cona, 40w led street light (outdoor), 2x11w cfltube lamp(size-1x1 ft) made of bajaj, 18w led surface light ( circular ceiling flush ) made of mescab/havells, 12w led surface light ( circular ceiling flush ) made of mescab/ havells, led tube set(4 ft long) made of havells, 100 amp kit kat, 6 x8 board with bakelite cover, 7 x4 board with bakelite cover, 8 x12 board with bakelite cover, 12 x15 board with bakelite cover, 3 x3 pvc board made of presto/precision, 4 x4 pvc board made of presto/precision, 6 x8 pvc board made of presto/precision, 7 x4 pvc board made of presto/precision, 8 x10 pvc board made of presto/precision, 10 x12 pvc board made of presto/precision, call bell(ding dong) [isi] made of anchor, call bell(musical) [isi] made of anchor, bell push [isi] made of anchor/ havells, flexible pipe [isi], 1 flexible pipe [isi], 1 flexible pipe [isi], 2.24 copper binding wire, 1 screw, screw, 1 screw, screw, 4 way mcb box enclosure made of sputnik/havells, 6 way mcb box enclosure made of havells/sputnik, 8 way mcb box enclosure made of sputnik /havells, 10 way mcb box enclosure made of sputnik/havells, 12 way mcb box enclosure made of sputnik/havells, 16 way mcb box enclosure made of sputnik/havells, 24 way mcb box enclosure made of sputnik/havells, 3 ph. 4 pole tpn mcb distribution board made of sputnik /havells, distribution box (2 / 3 way), distribution box (4 / 6 way), distribution box (8 / 10 way), distribution box (12 way), mcb ( 6 amp to 32 amp) single pole made of havells / hpl, mcb ( 6 amp to 32 amp) single pole & neutral made of havells / hpl, mcb ( 6 amp to 32 amp) double pole made of havells / hpl, 16 amp dp switch made of hpl/ havells, 32 amp dp main switch made of hpl/ havells, 32 amp tpn main switch made of hpl/havells, 63 amp tpn main switch made of hpl/havells, 100 amp tpn main switch made of hpl/havells, exhaust fan (9 ) incl shutter made of philips/ cg, exhaust fan (12 ) incl shutter made of bajaj/ cg, wall mounting fan (400 mm sweep) made of havells/cg, complete tube light box type double fitting made of hilips/ havells, 200 amp tpn main switch made of hpl/ havells, bulkhead fitting made of philips /havells, fancy braket isi marked, pvc connector isi marked, 3mm backelite sheet(2 x4 ) isi marked, 1 pvc circular box (1/2/3 way) isi marked, electronic fan regulator made of havells/ hpl, 32 amp copper busbar made of hpl / havells, 48 ceiling fan made of havells/ crompton, 63 amp copper busbar made of hpl/ havells, complete tube light box type single fitting made of havells/ hpl, 100 amp copper busbar made of havells/ hpl, 100 / 60 / 40 gls lamp made of bajaj/ philips/ cg, 32 amp. change over switch made of hpl/ havells, 63 amp tpn isolator made of crompton/ havells, 63 amp change over switch made of crompton/ ship/ havells, 100 amp change over switch made of crompton/ ship/ havells, 40 amp isolator made of crompton, cfl lamp 5 w made of philips/ havells, cfl lamp 9 w made of philips/ havells, cfl lamp 11 w made of philips/ havells, cfl lamp 14 w made of philips/ havells, cfl lamp
Tender For supply of instruments/other items (part-6 of 6) - expiratory valve 23bc, cdsco, euce 6993, whogmp, iso134852016, iso90012567, 1 no., 1754, silicone disc mebrane for "l" valve, cdsco, euce 6993, whogmp, iso134852016, iso90012571, 1 no., 1758, raos two stage air regulator 0400kg and 04kg, cdsco, euce 6993, whogmp, iso134852016, iso90012575, 1 no., 1762, video laryngoscope set with polycarbonate blade size 1, 2, 3, 4 (2 nos. each size) all in a carrying case, cdsco, euce 6993, whogmp, iso134852016, iso90012582, 1 no., 1766, polycarbonate curved macintosh blade size 4, cdsco, euce 6993, whogmp, iso134852016, iso90012586, 1 no., 1770, metal reusavke macintosh blade size 3, cdsco, euce 6993, whogmp, iso134852016, iso90012591, 1 no., 1774, metal reusavke miller blade size 0, cdsco, euce 6993, whogmp, iso134852016, iso90012595, 1 no., 1778, ambu auraonce mask size 2, cdsco, euce 6993, whogmp, iso134852016, iso90012601, 1 no., 1782, ambu auraonce mask size 5, cdsco, euce 6993, whogmp, iso134852016, iso90012605, 1 no., 1786, specifications of image processor (should be cdsco, iso 13485 approved) (principal company should have their own service center running with certified trained engineers without any thirdparty arrangements in india.) 1 the image processor should be compatible of providing output of 1920*1090p resolution full hd. 2 the image processor should have compatible of camera head for existing urology procedure rigid scopes. 3 the image processor should have in built led light source in same box. the inbuilt led light source should have life hours of at least 44,000 + hours of life. 4 the image processor should have digital outputs of dvi, sdi, vga and compostie/bnc. 5 the image processor should have compatible separate recordings slots of flexible scope and rigid camera head in full hd resolution. 6 the image processor should have separate settings for flexible scope and rigid which should be clarified at user interface. 7 the compatible camera head to image processor should very handy light weight of 250 gms. 8 the image processor can be used to control the led lights of scope accordingly to use as per surgeon preference and vision comfort., 1 no., 1790, 365 micron reusable 3 meters, flexible fiber (laser machine should be cdso, bis, iso 13458 ce approved), 1 no., 1794, 1000 micron reusable 3 meters, flexible fiber (laser machine should be cdso, bis, iso 13458 ce approved), 1 no., 1798, single pedal spill proof foot switch (laser machine should be cdso, bis, iso 13458 ce approved), 1 no.