Latest cfl bulb scrap Tenders | Government cfl bulb scrap Tenders

Central Government/Public Sector

CTN :45394827

18 Jun, 2026 NA

Danapur - Bihar

Tender For supply of signal exchange light - flashing led lamp (green and red) at outside of the driver's cab for exchange of signal between driver/guard and the station master during train operation, it shall be conforming to rdso specification no. elrs/spec/pr/0022 latest,visibility at 2km in day and night, frequency of flashing 55-65 per minute, ip66 protection. the overall general amangement shall be followed as per icf drg.no.889-7-2-007 latest stand suitableto vb rakes as per rdso specification no. rdso/pe/spec/emu/0196-2019 along with latest annexure and addendurn/corrigendum. icf drg.no.889-7-2-007 latest spec:rdso specification no. elrs/spec/pr/0022 latest & rdso specification no. rdso/pe/spec/emu/0196-2019 along with latest annexure and addendurn/corrigendum.

Central Government/Public Sector

CTN :45175748

09 Jun, 2026 NA

Malanjahknd - Madhya Pradesh

Tender For corrigendum : supply of ultrasonic level transmitter , pressure gauge , load cell , magnetic flow transmitter , flow control valve , limit switch , pressure gaguge , pressure transmitter , zero speed switch , flow transmitter , pull cord switch , pressure switch 7 bar , pressure gauge , radar level transmitter , pneumatic operated on or off ball valves , temperature gauge , temperature switch , pressure indicating transmitter , level switch , solenoid valve to lift rack up and lower , pressure switch , limit switch , bed mass transmitter , bed level transmitter , rake level transmitter , moulded case circuit breaker , rotary drive kit , motor protection circuit breaker , power contactor , semiconductor fuse , vfd , miniature circuit breaker , control transformer , potential transformer , ups , led indicating lamp for r phase red , led indicating lamp for y phase yellow , led indicating lamp for b phase blue , led indicating lamp for feeder on red rating 230vac , led indicating lamp for feeder off green rating 230vac , led indicating lamp for feeder trip amber rating 230vac , opaque actuator with holder push button for feeder start green , no block , opaqueactuatorwith holder push button for feeder stop red , nc block , opaque actuator with holder push button for dosing pump speed , opaqueactuatorwith holder push button for alarm reset black , opaque actuator with holder push button for alarni acknowledge yellow , mushroom actuator , 1nc 1 nc contacts , 1 way plastic control stations with yellow cover , 2 pole 2 way selector switch for feeder local , auxiliary relay , socket , auxiliary plug , signal isolator , panel top indicator , power supply module , plc , pneumatic operated on off ball valves , di or do card , ai or ao card , di card , hmi , ethernet switch , industrial ethernet cable 2x2 , rj 45 connetor , door mounted limit switch , tube light , enclosure heater , thermostat , utility socket , 6 inch fan and filter , vacuum gauge 3 by 8 inch bsp , pressure gauge 3 by 8 inch bsp //bid details 2 / 74

CTN :45422910

07 Jul, 2026 NA

Multi City - Multi State

Tender For relay, plug in type, style "ac led" all aspects, ac lamp proving relay unit with in-built current transformer type, slow release neutral line relay, 4f. 4b contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110v ac , led signal lamp rated at 15w confirmingto rdso spec. sts/e/relays/ ac lit led signal/ 09-2002, amd-1 brs: 941a, irs: s 34 & irs: s 23 (as applicable). the interlocking code for this unit shall be abdhk". [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 0 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 500 units per month , commencement time allowed -2 month ]

CTN :45386599

15 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for eee dept - purchase of lab equipments for eee dept, single phase transformer.itemcode:b002 single phase transformer,rating: 1 kva, 50 hz, input: 230 v acoutput: 115 v ac,type: air-cooled, single-phase step-down transformer properly insulated input and output terminals brought out for safe operation)., acidity test kit itemcode:b005specifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, dc stepper motor drive kit with stepper motoritemcode:b010specifications:stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet withprinted circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection, dc servo motor drive kit with servo motor itemcode:b011specifications:input supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided, three phase resistive load itemcode:b013specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, single phase single pulse / sinusoidal pwm inverter using mosfet/igbt kit itemcode:b028specifications:type : single phase pwm inverter trainer power device : mosfet / igbt based inverter circuit input supply : 12 24 v dc output voltage : 30 v rms ac output phase : single phase output frequency : 0 50 hz variable output power : 100 w single pulse pwm operation sinusoidal pwm (spwm) operation variable frequency control pwm generation and firing control circuit inbuilt gate drivercircuit provided test points provided for waveform observation and analysis built-in resistive load provision, on / off control of lamp using solid state relay kit itemcode:b029specifications:type : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status, speed control of ac motor using vfd drive module with ac motor itemcode:b030specifications:type : variable frequency drive (vfd) module input supply : 415 v ac, three phase, 50 hz o

Central Government/Public Sector

CTN :45404242

17 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of relay plug in type style qecx ac led all aspect ac lamp proving relay unit with inbuilt current transformer type slow release neutral line relay 4f-4b contacts front and back contacts metal to carbon shall be suitable for working in series with the 110v ac led signal, lamp rated at 15w, confirming to rdso spec.sts/e/relays/ac lit led signal/09-2002 amdt.1, brs:941a, irs-s-34 and irs-s-23 as applicable. the interlocking code for this unit shall be abdhk. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

CTN :45175483

04 Jun, 2026 NA

Billimora - Gujarat

Tender For corrigendum : supply of 14 v , transformer 240 6v , transformer 6 0 6 v 1amp 230v , transformer 9 0 9 v 1amp 230v , transformer oil , teak wood batten 300 x 25 x12mm , estrogen lotion 200ml , cake eyeliner different color 5gm , maskra- 4ml , kajal eye kajal pencil for eye makeup , bindi difrent colour and medium size , makeup primer pre make up 35ml , whitetone powder face powder 80 gm container , body lotion , alovera gel 500gm , nail polish red maroon yellow pink purple light blue black white etc , nail accessories nail art kit , foil papar aluminium foil paper 15 mtr , perming lostion 100ml , hairspa cream 500 gm , nilgiri oil for mehdi design 100ml , safetypin for saree small medium and big size each 2 dzn , 2 channel relay , 4 digit led module for clock , 7 segment display unit socket 10 pin , 8 digit led module , breadboard connector male to male , cmos battery 3 volt , common cathode type 7 segment display unit fnd 507 , cro probe bnc to crocodile , dc led lamp 15w 230v , dc solar cable black colour 6 sqmm , dc solar cable red colour 6 sqmm , de solder wick , lcd display module hd 44780 , lcd display module 16by2 , ldr , optocoupler mct 2e , photo diode bpw 34 , photo transistor pt 1504 6b , photo voltaic cell 1point5v , photo voltaic cell 3point3v , push button switch , relay 12v dc , relay 5v dc , acceletore wire splendor , brake wire splendor , carburretor packing set splendor , clutch wire splendor , oil paper sheet automobile , power connector , signal connector , valve grinding stick , valve lapping pest rough and smooth 400grm pack , copper flux , brazing flux , alluminium filler rod dia 1 point 6 mm er308 or 316 , copper filler rod dia 1point6 mm , ss rod dia 1 point 6 mm er308 or 316 , tungsten electrode white 1 percent zerconium dia 2point4 mm , tungsten electrode green pure tungsten 2point4 mm , mig welding wire spool dia 1.2 mm , super enamelled copper wire 36 swg , super enamelled copper wire 23 swg , super enamelled copper wire 29 swg , super enamelled copper wire 20 swg , super enamelled copper wire 42 swg , battery cell aa size, 1.5 v , battery cell aaa size, 1.5 v alkaline , battery 9 v hf with cap , cast iron electrode dia 3 point 15 mm , wireless keyboard , wireless mouse , contact block nc for red push button , contact block no for red push button , banana socket and terminal 4mm black , banana socket and terminal 4mm red , banana socket and terminal 4mm blue , banana socket and terminal 4mm green , ug cable joint kit 50 sqmm , microcontroller educational kit , workshop first air kit ppr joint dia 1 inch elbow, coupling, tee, 45degree, cross, union, ppr joint dia 1by2 inch elbow, coupling, tee, 45degree, cross, union, ppr dia 1 inch to 1by2 inch reducer, bib cock, angle cock double, 2 in 1 angle cock, wall flush cock, upvc dia 1 inch to 1by2 inch reducer, upvc dia 3by4 inch to 1by2 inch reducer, upvc dia 1 inch mta, upvc dia 1inch fta, upvc dia 1 inch to 1by2 inch mt bushing, upvc dia 1 inch to 1by2 inch ft bushing, pvc 50mm coupling, elbow, pvc 63mm coupling, elbow, brazing rod, battery cell r20 size d, external turning insert 150404, m12 by 6 inch hexagonal full thread nut and bolt with washer, olp, open type realy 1by6 hp, carbide tipped boring tool 3by8 inch p30, carbide tipped boring tool 3by4 inch p30, alluminum oxide grinding wheel rough and smooth 300 by 35mm id 20mm, v belt a 50, v belt a 72, v belt a 86, upvc pipe dia 1by2 inch, upvc pipe dia 1 inch, upvc pipe dia 1point5 inch, upvc pipe dia 2 inch, cpvc pipe dia 1by2 inch, ppr pipe dia 1by2 inch, ppr pipe dia 1 //bid details 2 / 103

Central Government/Public Sector

CTN :45372262

18 Jun, 2026 NA

Multi City - Multi State

Tender For supply of signal exchange light - flashing led lamp (green and red) at outside of the driver's cab for exchange of signal between driver/guard and the station master during train operation, it shall be conforming to rdso specification no. elrs/spec/pr/0022 latest,visibility at 2km in day and night, frequency of flashing 55-65 per minute, ip66 protection. the overall general amangement shall be followed as per icf drg.no.889-7-2-007 latest stand suitableto vb rakes as per rdso specification no. rdso/pe/spec/emu/0196-2019 along with latest annexure and addendurn/corrigendum. icf drg.no.889-7-2-007 latest spec:rdso specification no. elrs/spec/pr/0022 latest & rdso specification no. rdso/pe/spec/emu/0196-2019 along with latest annexure and addendurn/corrigendum. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45351357

04 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of lab equipments - purchase of lab equipments, acidity test kitspecifications:ethyl alcohol sodium carbonate solution universal indicator solution laboratory-grade test tubes droppers colour comparison chart for test result comparison chemicals supplied in labelled containers with safety instructions suitable for laboratory educational and testing applications, single phase resistive loadspecifications:type: single phase loading rheostat power rating: 5 kw supply: 230 v ac, single phase, 50 hz total number of load steps: 8 approximate dimensions: 18 18 22 inches (l b h) comprising electrical load resistors suitable for laboratory loading applications resistors shall be special cement-insulated type mounted on powder-coated ms panel/enclosure individual on/off rotary switches provided for load selection mounted on rubber wheels/casters for portability, three phase resistive load specifications:rating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided, three phase capacitor bank specifications: 3-phase capacitor bank rating: 2 kvar voltage: 440 v ac frequency: 50 hz heavy duty self-healing capacitor units powder coated ms enclosure compact panel mounted/floor mounted construction proper ventilation arrangement to be provided capacitor duty contactor/switch to be provided fuse/mcb protection to be provided discharge resistors to be provided for safety proper earthing arrangement provided, 3 phase auto transformer starter specifications: 3-phase variable autotransformer input: 415 v output: 0 470 v ac (continuous) current: 15 a copper wound, carbon brush type heavy duty toroidal/core construction mounted in powder coated ms/crca enclosure front panel mounted voltage control knob with scale indication proper insulated terminals provided floor/bench mounted type suitable for laboratory use input / output terminal arrangement provided mcb/fuse protection provided proper earthing terminal provided ventilation arrangement for heat dissipation, 3 floor lift interfacing model specifications: type: table-top lift model floors: 3 levels structure: transparent acrylic / ms frame cabin: moving lift car with guide rails drive: dc geared motor / stepper motor motion: up/down movement, floor indication leds (1, 2, 3) direction indicators (up/down), start & stop atevery stage, over load limit control three-floor lift operation plc interfacing and programming floor selection logic automatic stopping at floors direction indication system educational demonstration of elevator automation, mcb elcb trainer kit specifications: 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5amps two pole elcb 30ma lamp load single phase 5amps panel enclosure and terminal outlets, signal generator specifications: frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vp-p. rise time: 100 ns. distortion, dso specifications: bandwidth: 50 - 100 mhz. sampling rate: 1gs/s. channels: 2 (minimum) power supply: 100v 240v ac, 50-60 hz automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., horizontal scale: 5 ns/div 50 s/div or equivalent vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) waveform math: +, -, x , , invert, fft etc., waveform storage: 16 waveforms or equivalent communication interface: usb host, usb interface. 7-inch color display or equivalent input impedance - 1 m 2%, // 20 pf 2 passive probes (1x/10x), pwm based

CTN :45346462

11 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for eee department - 3 phase capacitor bank :* 3-phase capacitor bank * rating: 2 kvar * voltage: 440 v ac * frequency: 50 hz * heavy duty self-healing capacitor units * powder coated ms enclosure * compact panel mounted/floor mounted construction * proper ventilation arrangement to be provided * capacitor duty contactor/switch to be provided * fuse/mcb protection to be provided * discharge resistors to be provided for safety * proper earthing arrangement provided, 3 phase auto transformer starter :* 3-phase variable autotransformer * input: 415 v * output: 0 470 v ac (continuous) * current: 15 a * copper wound, carbon brush type * heavy duty toroidal/core construction * mounted in powder coated ms/crca enclosure * front panel mounted voltage control knob with scale indication * proper insulated terminals provided * floor/bench mounted type suitable for laboratory use * input/output terminal arrangement provided * mcb/fuse protection provided * proper earthing terminal provided * ventilation arrangement for heat dissipation, linear variable differential transformer measurement trainer :* input supply : 230 v ac, 50 hz * type : linear variable differential transformer (lvdt) trainer kit * lvdt stroke length : 25 mm * lcd display provided * digital voltmeter provided for output measurement * potentiometer provided for calibration and adjustment * signal conditioning circuit inbuilt * zero adjustment and calibration facility provided * test points provided for waveform/signal observation * clearly labeled circuit diagram on front panel * proper insulated terminals and safety sockets provided, plc trainer kit :* plc make :allen-bradley / delta electronics / siemens or equivalent* digital inputs : 8 20 nos.* digital outputs : 6 12 nos. (led / relay type indication)* communication port : rs232 / usb / ethernet (if available)* programming method : ladder logic programming* toggle switches for digital input simulation* led indicators for output status indication* analog potentiometers for analog input experiments* proximity sensor interface provided* relay output interface provided* input supply : 230 v ac, 50 hz* built-in regulated 24 v dc power supply* ladder diagram programming software to be provided* compatible programming software license to be provided* suitable for basic plc programming and automation experiments, conveyor arrangement with siren :* input supply : 12 v dc / 24 v dc / 230 v ac, 50 hz* control mode : manual / automatic operation using plc* conveyor arrangement with geared dc motor provided* proximity sensor provided for object detection* start and stop push buttons provided* audio siren indication provided* plc based control and sequencing operation provided* mini conveyor setup suitable for laboratory demonstration* geared dc motor driven conveyor mechanism* smooth belt movement with roller arrangement, digital storage oscilloscope (dso) :* bandwidth: 50 - 100 mhz. * sampling rate: 1gs/s. * channels: 2 (minimum) * power supply: 100v 240v ac, 50-60 hz * automatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc., * horizontal scale: 5 ns/div 50 s/div or equivalent * vertical resolution: 8 bits (2 channels simultaneously) vertical sensitivity: 1 mv/div 10 v/div (at input) * waveform math: +, -, x , , invert, fft etc., * waveform storage: 16 waveforms or equivalent communication interface: usb host, usb interface. * 7-inch color display or equivalent * input impedance - 1 m 2%, // 20 pf 2 passive probes (1x/10x), on/off control of lamp using solid state relay kit:* type : solid state relay (ssr) trainer kit* control/input voltage : 12 v / 24 v dc or up to 30 v dc* output load voltage : 230 v ac, single phase* load control : on/off control of ac lamp load* solid state relay based switching circuit* opto-isolated input control* built-in ac lamp load* manual on/off switching arrangement* led indication for input and output statu

CTN :45336621

28 May, 2026 NA

Howrah - West Bengal

Tender For supply of mounting arrangement for led based signal exchange lamp, as per clw spec no. clw/ms/3/0670 alt-2, sketch-002 (25/03/2022). [ warranty period: 30 months after the date of delivery ] ]

Cfl Bulb Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector