Latest cgi sheeting Tenders | Government cgi sheeting Tenders

CTN :43016260

16 Dec, 2025 83

Mandya - Karnataka

Tender For procurement of electrical items - led bulb 60w, led bulb 50watts, led bulb 40w, led bulb 30w, led bulb 23w, led bulb 18watts, led bulb 9w, alluminium 6sq cabel, mcp - 63 amps 2p, mcp - 40 amps 2p, mcp - 32 amps 2p, mcp - 25 amps 2p, mcp - 16 amps 2p, pipe clamp 1.25 inch od, pipe clamps 1.5 inch od, led street light 50w, led street light 24w, led street light 150w, pingani cfl holder, gi wire 20 gauge, insulation tape , dp switch 32amps open type, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 4 sq mm, copper cabel 2.5 sq mm, copper cabel 1.5 sq mm, copper cabel 1 sq mm, bed switches 16a, alluminium 4sq cabel, alluminium 20sq cabel, alluminium 16sq cabel, alluminium 10sq cabel, pipe clamp 2 inch od, pipe clamp 1 inch od, led street light 36 wattage, led street light 100 wattage, astronomical timer , contractor 50 amps, mcpcb 150w, mcpcb 50w, mcpcb 100w, led driver -1500ma 50w, electric tester, fuse cutouter 100amps, fuse cutouter 63amps, fuse cutouter 40amps, ip 65 out door led strip, cfl fitting 65w full set, cfl fitting 45w full set, safety glouse, safety shoes 7- 10 inches, cutting palyer, condenser 3way, condenser 2 way, bulb 250w sodium, sv chowk 250wattage, sodium light full set 250w, led bulb 12wat, alluminum wire 6.0sq, alluminum wire 4.0sq, pendent holder, timer, alluminum wire 2.5 sq, panel lock, metal oudoor boc 1 ft x 1.5ft x 8 inch, led bulb 15w, led tubeight 20w, iylem sheet for metal box 3mm thickness, indicator lamps, led flood light 300w, led flood light 250w, led flood light 200w, led flood light 150w, outdoor enclosure heavy gauge, cfl bulb holders, led driver 100w, copper wire 16 sq mm, contactor 200a, contractor 100amps, contactor 32a, bakelite panel board, mercury light set

State Government

CTN :43022705

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri and d block mcd flat nand nagari. (re-invite) - supply and installation of electrical and mechanical equipment of tubewell at k block edmc flat sunder nagri & d block mcd flat nand nagari by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :- dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

State Government

CTN :43022728

09 Dec, 2025 NA

Delhi - Delhi

Tender For supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1. - supply and installation of electrical and mechanical equipment of tubewell at tahirpur no.1 bps & nursery horticulture gtb enclave no.1 by carrying out following works:- dismantling/lifting of tubewells with the help of gas cutter and heavy manual labour., supply of pvc insulated sheathed copper conductor cable for submersible pump motor of size 6mmsqx3core make :- finolex/ havells/ grandlay/djb approved make, supply of 80 mm dia d/f g.i pipe in b class as per isi 3 mtr long complete with cutting flange for submersible cable and support welded. make :- jindal/ tata., supply of tail piece medium class 0.5 mtr long including one end flanged and other end threaded of 80 mm dia., supply of 80 mm dia g.i bend with both side flanged welded, s/o m.s. clamp of m.s. strip 8mm thick duly hole for holding the pipe of 80 mm dia with nut bolt and washer, s/o m.s bore cover made out of m.s. plate suitable for 12" dia bore complete with suitable hole for pssing the 80mm dia gi pipe., s/o ci, d/f swing type nrv of 80mm dia make:- kirloskar/ ivc, s/o electronic dozing pump (4lph,5.5 kg) electrically controlled operated 230v, 50 hz, supply chemical grade tank of 100 ltrs with pipe make- milton roy/clomax, s/o nut bolts with washer of good quality of 1/2"x2" size, s/o rubber packing sheet synthetic 50% make :- jyoti / national, lighting arrangement including providing fixing1 no. tube light fitting 40 watt , 1 no. bulb point, 1 no. flood light on wall of room and also control board.etc.i/c electrification of room., labour charges for lowering the submersible pump set with all allied e&m equipments and fixing delivery line, valves, electronic dozing pump i/c hardware items as nut, bolts & washer i/c cartage to & fro., lt panel work of tubewell in ram nagar sps :-dismantling of lt panel with allied equipment with the help of skilled labour.., s/o power contactor 32 a. triple pole. make l &t/ havells, s/o front mounting add on aux contact block. make : havells/l&t, s/o three pole power contractor -25a cap. make l&t/ havells, s/o ampare meter (0-30a) 4 size squ. type. make l&t/ae, s/o voltmeter (0-500v) 4 size squ. type. make ae/l&t, s/o indicating lamp set for ryb phase. make l &t/ havells, s/o single phase preventor. make l&t/ minilac, s/o timer switch digital/anolog type. make l&t / havells, s/o over load relay thermal type 14-23 a. make l &t/ havells, s/o star delta timer on delay. make l&t /havells, s/o sp mcb 6a. make : l&t/havells, s/o 3p mcb 63. make : l&t/havells, push button 22.5mm(red / green), s/o 4p 63 amp elcb make : l&t/havells, changeover switch 63 amp., s/o 100a 3p mccb 25ka. with spreader make : havells/l&t., s/o rubber mat for electrical purpose of size 1mx2m and 3mm thick. make:- jyoti/ national, labour charges for repairing of lt panel with installation of above components i/c electric connection , testing and commissioning on load.

CTN :43022993

17 Dec, 2025 5.12 Lacs

Multi City - Karnataka

Tender For construction of a sanjeevini shed in konanakeri village - mason class i (with tools) nrlm shed, painter class i nrlm shed, rubber beading for shutters beading nrlm shed, nylon rollers nrlm shed, aluminium window frame section 1.20 mm thick nrlm shed, alluminium tower bolt - 20 cm nrlm shed, alluminium handles - 15 mm nrlm shed, pvc edge beading nrlm shed, water proofing cement paint nrlm shed, distemper primer nrlm shed, vitrified tiles 600x600 mm nrlm shed, p.v.c. flushing cistern 10 lts low level with fitting nrlm shed, orissa pattern of size 580x440mm with integral type foot rests nrlm shed, g.i. overflow pipe 20mm dia nrlm shed, g.i. 32mm dia telescopic flush pipes with fittings specials nrlm shed, nrlm shed 100mm s or p trap, carpenter assistant nrlm shed, plumber nrlm shed, fabricator nrlm shed, white vitreous china clay surgeon type wash basin size 660 x 460 mm nrlm shed, silver oak or equivalent planks 38 mm thick nrlm shed, jungle wood runners and planks nrlm shed, honnewood planks for panels 20 mm thick nrlm shed, honne wood nrlm shed, cleat angles nrlm shed, chrominum plated screws nrlm shed, casurina poles 75 - 100 mm dia nrlm shed, casurina poles 100 - 150 mm nrlm shed, cp brass waste 32 mm of standard pattern nrlm shed, cp brass pillar tap elbow operated nrlm shed, brass stop cock nrlm shed, nrlm shed 5.50 mm thick plain glass, glazed tiles 300x450 nrlm shed, border tiles 30 x 10 cms nrlm shed, enamel paint nrlm shed, add watering charges at 1 % on material_s, add handling , loading and unloading at 1% mon material_s, binding wire_0sm, tmt bars fe 500_0sm, mixer (concrete small used in culvert)_0sm, coarse sand (zone iii)_0sm, portland cement_0sm

State Government

CTN :43017442

08 Dec, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For s and e led street light fitting on 6mr gi pipe pole (doule fitting ) in ward no. 2 zopadpatti wasti at ghardon tq. district chhatrapati sambhajinagar

State Government

CTN :43014422

08 Dec, 2025 3.99 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w led street light fitings on 6 mtrs.g.i. pipe pole double double fitting sets in annabhau sathe nagar under scheme schedule cast and nav bouddha locality development programme year 2024-2025 at village shirasgaon tq vaija

State Government

CTN :43014442

08 Dec, 2025 3.99 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 50w led street light fitings on 6 mtrs.g.i. pipe pole double fitting sets in ambika nagar under scheme schedule cast and nav bouddha locality development programme year 2024-2025 at village dhondalgaon tq vaijapur dist chhat

State Government

CTN :42985190

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 33 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 33 kv polymer pin insulators 10 kn with gi pin and nut & washer, 33 kv post insulator 10 kn (polymer), 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut & washer, 11 kv hg fuse unit (polymer type), 33 kv hg fuse unit (polymer type), gi wire no. 6/8/10, gi stay set complete for d/s/s (1900x 20mm) with stay wire 7/10 swg and guy insulator, stay set complete (1800x20mm) with stay wire 7/10 swg & guy insulator (galv), 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanized pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom.

State Government

CTN :42985193

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For supply of electric line materials under o&m head for f.y. 2025-26 - 25mm dia ms rod 3 m long for earth mat, 400 watt/250 v hpsv lamp fitting complete for 33/11 kv pss yard lightening, adhesive insulation tape, aluminum binding wire, aluminum pipe 40 mm dia, aluminum pipe connector, earthing g.i.strip (65x6)mm2, eye hook, dead end clamp 50-70 sq mm bare messenger, lt pre insulated mid span joint suitable 120 mm2 phases, lt pre insulated mid span joint suitable 70 mm2 phases, lt pre insulated mid span joint suitable 95 mm2 phases, p g clamp for 80/100mm2, p g clamps for 34/55mm2, pole clamp for i hook b type (0.8 kgs. each), service main anchor clamp for proper support of service cable, spike earthing made of 20mm gi solid rod, spring loaded cp multi conn bus-bar in insulated box single phase 1 in 9 out (dist. box for fixing on pole suitable for ab xlpe cable), stainless steel strip of 20mmx1mmx1000mm with buckle clip, jumpering wire (100 sq mm acsr conductor), jumpering wire (150 sq mm acsr conductor), hdpe pipe - 160 mm /6 pe 63 grade

State Government

CTN :42985206

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - ace chemrod (artificial concept of earthing by chemical rod):- ace chemrod earthing electrode (consisting mid steel galvanised pipe of size 2500 mm in length x 48 mm outer dia x 2 mm thick. ms-rod of size 2575 mm x 16 mm be weided with bottom. the epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanized pipe, earthing complete conventional type having intermittent layer of charcoal and salt/gi earthing pipe 3.1 meter long & 40 mm dia and 50 kg bentonite powder, earthing (chemical) with gi earthing pipe 40mm 3.1 mtrs. long (bentonite as intermittent layers), gi stay set complete for d/s/s (1900x20mm) with stay wire 7/10 swg and guy insulator, 11 kv stay set complete 1800x16mm with stay wire7/10swg and guy insulator, earthing (chemical) with gi earthing pipe 20 mm 2.5 mtrs. long, gi stay set complete for d/s/s (1900x 16mm) with stay wire 7/12 swg and guy insulator, lt stay set complete (1700x16 mm) with stay wire 7/12 swg, gi stay wire no. 7/8 ,7/10 ,7/12 ,7/14, 7/16, gi wire no. 6/8/10, 33 kv h.g fuse unit (polymer type), 11 kv h.g fuse unit (polymer type), 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv b&s type disc insulator (polymer type) 45 kn with h/w fitting, 33 kv polymer pin insulator 10 kn with gi pin and nut & washer, 11 kv pin insulator 5 kn with gi pin (polymer type) and nut &washer, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut &washer, 33 kv post insulator 10 kn (polymer), lt pin insulator with pin (porcelain type), lt shackle insulator (porcelain type)

Cgi Sheeting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors