Latest chaff cutter Tenders | Government chaff cutter Tenders

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

CTN :45425200

19 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of fibrizer, domite, and hammer in sugar mill

State Government

CTN :45427857

13 Jun, 2026 NA

Parbhani - Maharashtra

Tender For supply , installation, commissioning and testing of tmr plant 30 tpd intake inclined conveyor/ bucket elevator, hammer mill, bucket, mobile chaff cutter, belt conveyor with hopper, tmr mixer with motor, discharger with hopper with belt conveyor, tmr

CTN :45432708

19 Jun, 2026 2.59 Lacs

Pilibhit - Uttar Pradesh

Tender For supply of 1chopper knives as per drawing no bks mh 137 date 12march1990 duly hard faced by l and t 6006 welding electrode hardness 650 bhn without hole aprox wt 10 kg each on conversion wt to wt basis , 2chopper knives as per drawing no bks mh 137 date 12march1990 duly hard faced by l and t 6006 welding electrode hardness 650 bhn without hole aprox wt 10 kg each on conversion wt to wt basis , 3chopper knives as per drawing no bks mh 137 date 12march1990 duly hard faced by l and t 6006 welding electrode hardness 650 bhn without hole aprox wt 10 kg each on conversion wt to wt basis , 4swing fibrizer hammer fabricated from mild steel is 2062 gr b tested quality duly hard faced fitted with gm bush as per drg no ss kscm 2019 to 2004 without tip on conversion wt to wt basis , 5swing fibrizer hammer fabricated from mild steel is 2062 gr b tested quality duly hard faced fitted with gm bush as per drg no ss kscm 2019 to 2004 without tip on conversion wt to wt basis

CTN :45360143

10 Jun, 2026 NA

Karnal - Haryana

Tender For purchase of knives & hammers - "{mill house spare store a/c}fibrizer hammer(sp0628)with gun metal bush approx weight (650 g) and total hammer finish weight 25 kgs ± 25g duly head facing drg. no. ss0124-05152001-001-0005 rev-01", "mill house spare store a/c}cane cutting knives for leveller,material-is2062,gre 250br,drg.no.-ss0124-05151501-011-0003,make : eci(sp0059)"

State Government

CTN :45361298

11 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For providing & laying c.c pavement of chaff cutter unit at dairy nagla

CTN :45333128

11 Jun, 2026 NA

Saharanpur - Uttar Pradesh

Tender For supply of top roller bearing 1 , mill top roller bearing 1 , gun metal 1 , gun metal casting 2 , fibrizer hammer 1 , fibrizer hammer shank 2

CTN :45346604

05 Jun, 2026 3.10 Lacs

Sonipat - Haryana

Tender For internal cleaning of both boilers ha111 112 wet scrubber etc complete cleaning washing and painting of mill house pits gallery cane carrier rack carrier and fibrizer