Tender For auction sale of depot ferrous scrap - scrap ferrous melting consist of cut up parts of coaches including scrap ms sheet, channels, body bolster, angles , different type of rods, brackets, strips, head stock assembly, trough floor ,b.s.door, ms emergency window frame,ms seat partition, frame, ms window equalizing device, pipes,, foot step and foot plate, nut ,bolt ,split pin various condemned scrap ferrous surplus non stock,stock items released from shops, panels of coaches with or without minor wooden/c i /non-ferrous attachments, if any etc. note : cutting permission may be allowed for easy loading s.b.lot no. bpl/ crws/26-27/ /ferrous/ 12/ 0043 restricted item-1 axle box spring and bolster spring .2. screw coupling. brake beam, draw hook, buffer plunger, buffer socket, vacuum reservoir. 3. stainless steel items.4 gi pipe above 3 feet length will not be delivered 5, all type of bearing. note- (a) non ferrous (except minor attachment) if any found in the lot will not be delivered (b) regarding classification of items, depot officer verdict will be final for any dispute. note: delivery will be made on actual weighment basis.
Tender For auction sale of others - condemned released unserviceable heavy melting mild steel scrap consisting of under truck items coupling knuckles, gear cases, screw couplings, gears, shock absorbers, buffers, bolts, nuts etc weighing approximately 60 mt. (1) sold on as is where is basis, available under the custody sse/dsl/kjm as declared vide ds-08 no 230625 dt. 18.05.2026. (2) location: bin no.10 at scrap yard dsl shed kjm. (3) delivery to be made on weighment basis only. (4) road approach available. (5) weighing facility is available at 8 km from the site. (6) purchasers should survey the material for road approach, location and quantity before bidding to the lot. after bidding no correspondence will be entertained. (7) segregation is not permitted.
Tender For auction sale of depot ferrous scrap - scrap ms melting consisting, ms and gi nut bolt revet, signal lever, head stock assembly,rail screw, ms angle below 1 feet,draft gear,foot step,punji,end cover, screw coupling,buffer plunger,bridle bar,coupler yoke, and all type of signal melting,signal rod piece below 3 feet, screw rod,joggle fish plate,switch fittings,switches,slide chair bearing plate,gauge tie plate, stretcher bar,gilmet,air brake cylinder complete and loose,axle cover,knuckle,dv,cp top, and bottom, shackle,empty box iron,boxes,ms round,ms pipe ms bar,ms pully, coupler rod,lashing chain,signal lever,beater, buffer socket, phawrah,coupling shaft ,iron strips,d valve,empty rru and similar box,brake beam, shocker , truss bar, striker casting,ms jali,ms small angle, shocker crow bar,axle box housing,shackle, pu pad cover,pull and push rod,side bearer housing, hand brake wheel, equailising lever,sab part, lever, erc all type jack,brake beam, isolating cock ,drain cock,bp/fp angle cock,bend plate,wiper arm safety shoe,clamp bracket,operating handle flange,sand injactor body, band plate,all type of heavy melting category similar items with or without undetachable nf attachment .note-while delivery if any other non ferrous or non similar items found in the lot will not be delivered.qty.on approx basis. as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038917799 bwta (2) nr 81039019201 bwta (3)nr 81038960566 bwta (4)nr 81038960597 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(78.420 mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(78.420 mts) on approx basis , advice note no.25-033857 dt-20.03.26 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding. note-as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot
Tender For auction sale of depot ferrous scrap - p.l no. 98050047. scrap c & w fittings consisting of bolster hanger, anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box, laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous), bottom casting, lower spring beam, oxy cut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke, hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, brake cylinder, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any nonferrous. qty-132mt. location-east of vm road in ncb-11.
Tender For auction sale of rolling stock - lot no. divn/s-yd/35/05/26-27/bg/cond./8w/coaches. description - iron and steel scrap cutup parts of bg cond./8w/coaches with n.f attachment without contents if any. 1) special repair 056903 wgaccn 2)se 058106 wgaccn nb: [1]. (a) all coaches are to be sold without 08 nos. wheel sets complete alongwith roller bearing with bio tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 02 nos. serviceable bogies against special repairl no: 01-01 ( bogie end-2) and special repairl 02-01 ( bogie end-1) (c) the coaches are to be sold with 02 nos. unserviceable bogies without excluded fittings. against special repairl no: 01-01 and 02-01. nb[2]: special condition for rolling stock- a) all excluded fittings including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded fittings from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded fittings by their own arrangement including labours and hand over the same to: - (i) sse 27-28 bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket,alu. water tank, bmbc, etc. (iv) sse-29 bio tank. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register ¿purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] 08 nos. wheel sets complete along with roller bearing, 02 nos seviceable complete bogies, bio tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse. nb:[4] delivery will be given in numbers. nb: [5] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied ( railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.
Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- material lying at bin no. c-05 in scrap yard judw. remarks- loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery.
Tender For auction sale of depot ferrous scrap - scrap ms mix consist of flat split cotter, cut off angle cock, screw coupling, coupler rod, brn piler, k -pin, hand brake wheel, brake shoe key, a/cock,pull rod, lock, yoke, adaptor, scrap, foot steps, lower arm, base frame, upper frame, pushrod, steady tube, carbon strip, , chisel bar, chisel rod, chipping machine, clamp bailer, pavement breaker, coupling with rod, hand ratchet, jack rod, pipe cutter, plumb bob, punch rod, punch rivet, spanner, , chainhook, drill rod, plates trolley and other ms scrap. note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location: a by 1.
Tender For auction sale of depot ferrous scrap - scrap loco parts consist of side buffer, cow catcher, yoke pin, cbc shunk, knuckle, clevis, clevis pin, screw coupling, lock, double rotary, knuckle pin, equalizer beam, compensating beam, link, short beam, long beam, sand ejector, dowel plate and ci and other attachments. note:- the purchaser should see the lot personally before bidding. no claim will be entertained after the sale of lot location- b by 1
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 93919 vpu 2. cr 93834 vpu 3. special repair 93832 vpu 4. cr 93915 vpu r/items: 1. wheel set with axel, axel box cover of all coaches=16 sets & complete 08 trolley with fittings. 2. dv of all coaches = 04 nos and bmbc of all coaches = 16 nos. 3. draw bar hook with screw coupling complete assembly = 08 nos. 4. buffer plunger = 16 nos, and buffer casing=16 nos of all coaches. 5. lot will be sold on number basis. remark: - 1. coaches are lying at roh sick line no.03 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard. location: roh sick line no.03 at cla cutting yard. stock holder:-sse/roh/c&w ltt.