Web Analytics Made Easy - StatCounter

Chain Pulley Block Tenders

Get complete information related to latest Chain Pulley Block Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Chain Pulley Block Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Chain Pulley Block Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40843279 Due date: 14 Jul, 202514 Jul, 2025 4.86 Lacs
Tender For bid to ras supply of tools kit d d - rotery barel pump , d spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , adjustable spanner slide wrench , 12point7mm squre drive socket set , allen key long ball point set , 12inch hacksaw frame square , hacksaw blade hss all hard 300mm , digital lux meter range 20-2000 lux , insulated combination plier , adjustable screw driver set , blow tourch with 5kg cylinder and nozzle , cotton tape 1inchx50m , empire tape 3by4inch 20m roll yellow , pvc self adhesive electrical insulation tape 3by4inc , ht rubber tape 1x10mtr , line tester length of blade 200mm , digital line tester length 130mm , digital earth resistance tester with all standard and optional accessories , hand driven insulation tester meggar , digital insulation tester , digital ac clamp meter jaw opening 30mm , hammer with handle 1kg , heavy duty electric hand grinder tool set 240v , bearing rope pulley block 4inch , non contact high voltage detector , heavy duty pipe wrench length 450mm , slide wrench 12inch , hydraulic crimpling tool 10-300sqmm , heavy duty pipe wrench length 300mm , heavy duty pipe wrench length 600mm , insulated screw driver 08inch blade dia 8mm , insulated screw driver 10inch blade dia 5mm , rind spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , bearing puller size 8 , mild steel chain pulley block geared 5 ton 6mtr load chain , tirfor 8tonn rope lenth 20m body matreial alloy steel , electrician tool kit

CTN :41012494 Due date: 15 Jul, 202515 Jul, 2025 NA
Tender For tender for supply of lv7/krz 10324992 ct103-3708200-a armature , lv7/t-815 10313871 130-054-390-524 rubber bellows , lv7/t-815(hmv) 10523331 482-hp-11716 chain pulley block (0.5t capacity) , lv7/t-815 10328597 130-046-900-024 protective bag , lv7/t-815 10333450 5306 062152 disc screw m22x1.5 , lv6/mt3 10548616 6220-000052 blackout stop light lh and rh , lv7/itr/beml 10315076 rfso-121230 hex screw m 12 x 30 (lot 3 and 4) , lv6/mt1 10543659 4730-000049 lubricating nipple conical head straigh , lv7/t-815 10328542 443-317-039-109 fog lamp signal lamp

CTN :41003652 Due date: 19 Jul, 202519 Jul, 2025 NA
Tender For supply of supply of lifting tools d d - chain pulley block 3 met t riple sp 1 to , chain pulley block 3 met t riple sp 3 to , chain pulley block 3 met t riple sp 5 to , chain pulley block 3 mtr t riple sp 2 to , pulling lifting machine 15 m 5 2 3 2 , pulling lifting machine 20m 3ton 2ton

State Government

CTN :41005133 Due date: 28 Jul, 202528 Jul, 2025 10.00 Lacs
Tender For procurement of chain pulley blocks - item name chain pulley block 2 ton, item name wire rope 13mm , item name turfer puller, item name chain pulley block 10ton x 20mtr, item name chain pulley block 5t - 10mtr., item name chain pulley block(3tx10mtrs), item name chain pulley block 2 tonne cap, item name chain pulley block 1 tonne cap

Central Government/Public Sector

CTN :40979948 Due date: 17 Jul, 202517 Jul, 2025 NA
Tender For supply of chain pulley block, capacity- 5 t (min. ) , length, lift: 10 m, is 3832: 2005 , chain pulley block, capacity- 10 mt (min. ) , length, lift: 6 m (min. ) , is 3832: 2005

Central Government/Public Sector

CTN :40979993 Due date: 17 Jul, 202517 Jul, 2025 NA
Tender For supply of chain pulley block, capacity- 5 t (min. ) , length, lift: 10 m, is 3832: 2005 , chain pulley block, capacity- 10 mt (min. ) , length, lift: 6 m, is 3832: 2005 , chain pulley block, is 3832, capacity- 2 ton, length, lift: 10 m, , chain pulley block, capacity: 3 t, length, lift: 12 m, is 3832

CTN :40977846 Due date: 17 Jul, 202517 Jul, 2025 NA
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 1 load testing of eot crane, monorails and mobile cranes of various capacity as per table 1 of scope of work; as per tender document,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 2 chain pulley blocks of zeropoint5 mt, 1mt, 2mt, 3mt, 5mt up to swl 10mt overload zeropoint75 mt to 15 mt; as per tender document,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 3 steel wire rope slings from 1 mt to 30 mt swl; as per tender document,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 4 polyester web slings from 1mt to 10 mt swl; as per tender document,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; sl no 5 d shackles from 1mt to 25mt; as per tender document,repair, maintenance, and installation of plant/ s

State Government

CTN :40939435 Due date: 15 Jul, 202515 Jul, 2025 4.89 Lacs
Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

Central Government And Public Sector

CTN :40937529 Due date: 24 Jul, 202524 Jul, 2025 NA
Tender For supply of 1.66604004050 manorail trolley, hand operated, capacity-10t , 2.67402040150 chain pulley block 10 mt

Corporations And Associations And Others

CTN :40927279 Due date: 14 Jul, 202514 Jul, 2025 NA
Tender For supply of hardware materials - hardware items, ms nipple"c" class size 3/8"x4" both ends threaded, ms long bend 3/8"external threaded at both ends., ms nipple "c" class size 1/2"x4" both ends threaded, ms long bend 1/2" external threaded at both ends., ms connector 1/2" bsp, s.s.socket 3/8" bsp, ms socket 1/2" bsp, angle grinder wheel ag 4 -4", bosch make, buffer wheel - 4", bosch make., flat centre cutting wheel for metal107x1.0x16, angle grinder wheel ag-7 (180x6.6x22.23), bosch make, rubber hose pipe 3/4", wire breaded steam hose pipe 3/4",w.p.10 bar bs 342-1, electric air blower 620 w,model gbl 620, bosch make., transparent sheet white 10 mm thick ,size 15"x 6 feet, forged steel u-clamp for steel wire rope 1/2", forged steel u-clamp for steel wire rope 3/4", screw clamp ( heavy) for hose pipe 1/2", screw clamp ( heavy) for hose pipe 1", screw clamp ( heavy) for hose pipe 1.5", red lead, ms ferrule 16 mm, s.s. plate 8 mm thk., (1250x2500), plumber blocks s.n. 510, jmc make., spring steel flat 38x6 mm, spring steel flat 63x10 mm, spring steel square bar size - 2", cotton waste, coconut rope, emery cloth - rough, carborandum make., emery cloth - fine, carborandum make., emery tape - rough, carborandum make., emery tape - fine, carborandum make., emery paste - rough (400 gm pack), carborandum make., emery paste - fine (400 gm pack), carborandum make., painting brush size 4", make raj/ any is., painting brush size 3", make raj/ any is., painting brush size 1", make raj/ any is., old dhoti (5 mtr), hacksaw blade 1/2" x 12", miranda make., teflon tape 3/4", champion make., teflon rod 30mm x 300mm, teflon rod 40mm x 300mm, holdite (500 gm pack), brasso (500 gm pack), restolene (400 gm pack), blue tube, anabond 666, lead wire 1mm, lead wire 3mm, stag b jointing paste,type - b, red complies to bs6956 part 5:1992,temp resistance = -40 c to 650 c (1pack = 1 kg), brass liner size 400mm x 1000mm thickness - 0.1mm, brass liner size 400mm x 1000mm thickness - 0.2mm, brass liner size 400mm x 1000mm thickness - 0.3mm, brass liner size 400mm x 1000mm thickness - 0.5mm, chain pulley block yellow colour chain length = 15 mtr. along with test certificate size 2 ton., professional angle grinder, model - gws 600, power supply 220 230 vac rpm 3000, bosch make., impact drill machine 13mm capacity, 600 watt, model gsb 600, bosch make., wooden planner machine blade tct 82 mm, xtra power make., circular saw machine blade 5 x 40 teeth, xtra power make., circular saw machine blade 5 x 30 teeth, xtra power make., screw driver star type with magnet 10 , taparia make, jamur 9 , taparia make., band saw machine blade 2 , black screw for wooden work 3.5 x 19 mm, black screw for wooden work 3.5 x 30 mm, concrete smart nail gi 1 , concrete smart nail gi 2 , power hacksaw blade, ms nail 2 x 14 no, -do- 1.5 x 14 no, -do- 1 x 14 no, hydraulic door closer, hinge steel (kabja) 4 , -do- 3 , wooden ply 6 x 3 x 6 mm, -do- 6 x 3 x 12 mm, wooden ply board 6 x 3 x 19 mm, table drawer lock, spring steel chisel 6 , spring steel chisel 8 , spring steel chisel 10 , steam coal/ japani bazri, air blower suitable for black smith furnace., aluminum ribbet 3/16 x 1.5 , gi socket , unique make., gi elbow , unique make., gi tee , unique make., gi union , unique make., gi pipe , unique make., gi socket 1 , unique make., gi elbow 1 , unique make., gi tee 1 , unique make., gi union 1 , unique make., ms socket hydraulic tested, ms elbow hydraulic tested, ms tee hydraulic tested, ms union hydraulic tested, ms reducer 3/8 to hydraulic tested, ms blind hydraulic tested, hss drill 3 mm, anderson make., hss drill 4 mm, - do - 5 mm, hss drill 8 mm, - do 10.5 mm, - do - 11 mm, - do - 13 mm, - do 3/8 , - do 1/2 , - do 1 , flat file fine - 14", half round file fine - 14", flat file rough - 14", round file rough - 14", wooden cut file half round 14 , triangular file 6 x 6 mm, grinding wheel green, fine 50 x 38 x 255 mm, sa60j, - do but black, rough, grinding wheel green, fine 50 x 50 x 255 mm, sa
 Loading, Please wait...

Connect us via What's Up