Latest chalk making machine Tenders | Government chalk making machine Tenders

Central Government/Public Sector

CTN :45407946

02 Jul, 2026 NA

Cuddapah - Andhra Pradesh

Tender For tender for supply of oil filtration system spares - rrr pump baotn trichoidal pump set pressure 4.5bar , flow rate 5lpm , operating pressure for oil 1 to 4.5bar model rfse100 , make triple r part no rrr-pump-001 , triple r filter element , tr.20520 , x 100-h114 series for hydraulic oil 5micron , filter rating1000 part no rrr-filt-223 , stand box part no rrr-stan-801 , electrical panel box part no rrr pane-283 , pressure guage part no rrr guag 112 , rrr housing part no rrr5lpm 001 , strainer part no rrr stra 258

CTN :45048307

30 Jun, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government/Public Sector

CTN :44434794

10 Jun, 2026 NA

Golaghat - Assam

Tender For corrigendum : design, engineering, manufacturing, procurement of materials and bought out components, assembly at shop, inspection including inspection by tpia, testing at manufacturer works, packing, supply of electrical heat tracing - design, engineering, procurement, fabrication, inspection, testing, transportation, and supply electrical heat tracing system to be installed at numaligarh refinery limited(nrl), assam including erection & commissioning spares, mandatory spares , special tools and tackles, supervision, site work & training charges at site as per the enclosed tender standard specifications, job specification, data sheets etc. and other codes and standards attached or referred as per material requisition for numailgarh refinery limited, golaghat, assam, india.

Central Government/Public Sector

CTN :45148477

30 Jun, 2026 NA

Koderma - Jharkhand

Tender For corrigendum : supply of lp byass system package for koderma project : : - w90312300603 lpbp for koderma unit 1 , w90312300603 lpbp for koderma unit 2 , st9731230009 ste mandatory spares for lpbp , st9731324739 electrical c and i mandatory spares for lpbp , per mandays charges , per visit charges

State Government

CTN :45007424

29 May, 2026 1.49 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : complete overhauling of electrical wire rope hoist along with supply of spares for electrical wire rope hoist installed at coal mill area at 2x600 mw, stage-i, sstpp, mppgcl, dongalia. - scope of service, complete supervision & installation of new spares/replacement of damaged/eroded spares of all 08 numbers of hoist (04 numbers capacity-20 ton & 4 numbers of capacity-15ton)., scope of supply, spares for 20 ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4 duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct<, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 20, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 20 mm / 6x36 steel core/ galvanized, make- ushamartin, push buttons with 12 meter cable, rectifier size- eh720hhd, long travel dsl system, i- chain (5 mm)-, ii- cable 6 mm epr, iii- fasteners (1/4x2 ), lt motor shaft, lt motor pinion, spares list of 15-ton hoist, brake motor 15hpx1000rpm, 40% cdf, 150st/hr, s4,duty, foot mounted sq cage f/s 160 l, terminal box required right side for 15t or 20t hoist make : siemens, brake motor 1.5hpx1000rpm, 40% cdf, 150st/hr, s4 duty, flange mounted sq cage f/s 90 s for ct, terminal box required top side make : siemens, gear box with coupling for trolley, mdl: ibc162/25.9/200-24 make: premium, gear box with coupling for trolley, mdl: ibc162/18.9/200-24 make: premium, rotary limit switch make: soc, two way lever type limit switch, make: soc, disc brake for 15hp motor, make: - emco, type 14.458, size: - 18, disc brake for 1.5hp motor, make: - emco, type 14.458, size: - 12, cable trolleys medium duty, wheel dia min 40 mm., wire rope 15 mm / 6x36 steel core/ galvanized, make- ushamartin, pendent push buttons, rectifier size- eh720hhd, long travel dsl system, chain (5 mm)-, cable 6 mm epr, fasteners (1/4x2 ), lt motor shaft, lt motor pinion

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

CTN :45334324

15 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For e – tender for the purchase of medical equipment and furniture for state cancer institute, koni, cims bilaspur (c.g.), government of chhattisgarh - secretariat /executive officetable –rectangular - 16 slice c.t. simulator, digital x-ray machine with 10 year warranty & accessories, ultra sound machine with 10 year warranty & accessories, c-arm machine with 10 year warranty & accessories, hdr brachytherapy using at least 20 sources (co-60/ir-192), integrated usg and c-arm imaging system, hdr brachytherapy using co-60/ir-192 source- accessories,, spares, consumables & dosimetry, ot equipment, 1. mayo stand, 2. anaesthesia trolley (complete with ambu bags and other, items), 3. difficult airway trolley - bronchoscope, lmas and, intubating bougie, 4. anaesthesia machine & anaesthesia work station, 5. electrical suction, 6. laryngoscope with 5 blades (led), 7. defibrillator (aed plus manual with ecg), 8. surgical diathermy - bipolar, 9. ecg machine – high end multichannel, 10. bowl sterilizers - different sizes, 11.oxygen cylinder d. type, 12. washer disinfector, 13. blood warmer, 14. glucometer, 15. anaesthetic - laryngoscope magill’s with four blades, 16. endotracheal tubes: different sizes, 17. magill’s forceps (two sizes- adult & paediatrics), 18. e.t.t. and connector set of six, 19. catheter mount for connecting ett, 20. airway male & female - guedel oral airway (to be, provided as per need), 21. airway male & female - nasopharyngeal airway, 22. tongue depressors, 23. n2o cylinder for boyles-d type, 24.co2 cylinder for laparoscope, 25. spirometer, 26. exchange transfusion sets, 27. adult resuscitation kit, 28. neonate resuscitation kit (to be provided as per need), 29. emergency first aid kit (to be provided as per need), 30. multi para monitor (desirable anaesthesia work station, available in ot), 31. infusion pump, 32. syringe pump, 33. pressure bags for pushing blood during massive transfusion, 34. oxygen concentrator, 35. ot ceiling light double combination with centrally, mounted camera (quantity - 01 nos), ward equipment, 1. vital signs monitor (multiparameter), 2. bp apparatus (digital/manual), 3. thermometers (digital/infrared), 4. pulse oximeters, 5. glucometers + strips, 6. thermometers (oral, rectal, digital and ir), 7. stethoscopes, 8. weighing scales (adult, pediatric), 9. infusion pumps, 10.syringe pumps, 11. nebulizer machine, 12. ecg machine-6 channel, ecg roll(50 no), portable ecg, leads, & electrodes, 13. automated external defibrillator (aed), 14. manual defibrillator, 15. suction machine (portable & wall-mounted) with 100 no, suction tubes, 16. tourniquets, 17. ecg machine, 18. cpap/bipap machine, 19. bp apparatus digital, 20. fumigator, 21. needle cutter, 22. drug refrigerator, 23. dressing trolley, 24. crash cart, fully automatic rotary microtome, fully automated immuno histochemistry staining system, paraffin embedded station rt, high throughput robotic stainer, automatic vacuum tissue processor, fully automated slide stainer, digital colposcope, hospital furniture, 1. secretariat / executive office table –rectangular, 2. executive &revolving chair with high back, 3. executive &revolving chair with high back- ergonomic chair, 4. executive office table with side storage-rectangle/l shape, 5. executive &mesh-revolving chair with arms & mid back, 6. revolving chair, 7. special sofa 3 seater- tubular steel, 8. rectangular- modular centre table with glass top, 9. computer table with printer/copier/fax combination desk, 10. wall mounted & over head chamber type wooden, wardrobe, registration desk(01 no) & window display cum, counter rack- customized with all locking system- customized, 11. round wastepaper basket, made of steel, 12. white board(pt notes), 13. notice board, 14. whatnot/corner shelf, 15. clock, 12" diameter. round surface, 16. composite office desk, 17. wall mounted dressing mirror, 18. towel rack/rail, 19. hand drier- automatic, 20.

corporations/Associations/Others

CTN :44328348

09 Jul, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : ennore sez - establishment of flue gas desulphurisation (fgd) system and its auxiliaries for 2 x 660 mw ennore sez under single epc basis. - engineering, procurement and construction (epc) contract for complete design, engineering, manufacture/procurement, assembly, inspection, testing at manufacturer’s works, packing, forwarding, transporting and insurance, supply of complete machineries (complete mechanical, electrical, instrumentation & control systems and civil, structural & architectural works and mandatory spares at site), assembly, erection, testing, commissioning, trial/ reliability run, conducting performance guarantee tests and handing over of flue gas desulphurisation system and auxiliaries for 2 x 660mw ennore sez supercritical thermal power project at ash dyke of nctps, , tamil nadu.

Central Government/Public Sector

CTN :45269609

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For providing services of electrical manpower, preventive maintenance of electrical system at substations and operation and maintenance electrical spares in shyamali township and mecon head office, ranchi

CTN :45247322

16 Jul, 2026 NA

Delhi - Delhi

Tender For procurement of spares for mirage aircraft - first line electrical tool kit, blanking plug, chest tool kit, lox system drainge trolley, lox storage tank, antiskid devicetes, screwing tool kit, canopy storage support, set of pipe for pressure generator, flow meter gauge, lubricant duispenser, steering bar, sherlock tool kit, adapter cable j04, portable, contact checking tool kit, pressure generator, adapter, p/s airtightness test set, adapter mechanical test

Chalk Making Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector