Latest channel bar Tenders | Government channel bar Tenders

Central Government/Public Sector

CTN :40119597

15 May, 2025 NA

Jaipur - Rajasthan

Tender For supply of ms angle - 1 inch x 1 inch , ms sheet , door handle , fastner - 10 x 120 , gi wire , hammer drill bit size- 6 x 75 mm , hammer drill bit size-8 x 160 mm , hammer drill bit size-10 x 160 mm , hammer drill bit size-12 x 160 mm , hammer drill bit size-14 x 160 mm , hammer drill bit size- 16 x 160 mm , hammer drill bit size-19 x 160 mm , hex head self drilling screw size-1 inch , hex head self drilling screw size-one and half inch , hex socket nut driver tool , iron cutting blade , iron grinder wheel , iron mosquito mesh size- 3 x 50 feet , iron mosquito mesh size- 4 x 50 feet , j hook , machine screw , measuring tape - 5 meter , bugle head dry wall screw , ms angle - 35 x 35 x 5 mm , ms bolt - 2 inch with nut , ms bolt - two and half inch with nut , ms flat bar - 25 mm and thick - 3 mm , angle grinder , ms wire mesh , nut bolts 6x 50 mm , polycarbonate sheet , ph2 bit set of 10 pcs , safety goggles , safety gloves , sledge hammer , spanner set 6-32 mm , screw driver bit set , sprit level magnet type , star bit 4 inch , star bit 5 inch , trush head self drilling screw screw - 1 inch , 500pcs packet , trush head self drilling screw screw - half inch , 500pcs packet , welding rod , welding rod stainless steel , welding machine two phase , welding machine holder , welding machine cable

State Government

CTN :40095274

19 May, 2025 NA

Birbhum - West Bengal

Tender For providing electro-mechanical accessories and others at pump house- i and ii for bahadurpur w/s scheme at murarai -i block under bolpur mechanical division phe dte. - supply and delivery at site of the following submersible pumping machinery and electrical accessories as per approved vendor list of phed, submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- pump:duty condition -25.74 m3/hr, head- 57 mtr, shaft-stainless steel, impeller- s.s / gm, outlet size: 65mm / 80mm., motor:submersible type 3 ph , 50hz, 415 volt 10% 2900 rpm motor must be suitable for operation with star delta starter.(test certificate along with characteristic curve should be submitted at the time of delivery)., 1.1kv grade 4 sq.mm x 3 core water proof flat submersible cable for above pump-motor set., 1.1kv grade 10 sq.mm 3 core xlpe insulated aluminium armoured cable conforming to is 7098 (part-i) 1988, with upto date amendments., supply and delivery of the following valves, pipes and gauges etc at site, 3mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg, 1.5 mtr long 80mm dia upvc standard type column pipe [cream color] with both side threaded and one end side socketed with registered kpmg., 80mm dia. ci top & bottom adopter., heavy type suitable dia. ms suspension clamp along with nuts bolts and washers., 80mm dia. cidf non-raising sluice valves, pn 1.0 rating (conforming to is:14846) for delivery pipe line and wash out line.(moc & tc needed for valve)., 80mm dia. cidf single door swing non return valve, pn 1.0 rating (conforming to is:5312).(moc & tc needed for valve)., cidf 90 bend- 1no., ci flanged tee- 1no., blank flange-1no., ci/ ms flanged short piece 0.50 mtr.-1no, ci/ ms flanged pipe 1mtr.- 1 no. etc (as per is specification and certification registered) for construction of delivery pipe line and wash out line, heavy type 250mm dia./suitable split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design., anti snapping safety device for pump set by supplying suitable size of ms angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials, 150mm dial pressure gauge [range 0-7kg/cm ] with glycerine filling inside the dial including brass cock and fitting complete [this cost includes 15mm. dia g.i. pipes and specials]., making brick pillar 0.25 x 0.25 x 0.75 mtr/suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete., making cc foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 mtr below the gl including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of eic (size: 3 x 1 x 5)., suitable kiosk box for cable connection of submersible pump motor set with degree of protection ip 65 including suitable legs and 6 nos. al. bus bar for 32 amps and all necessary earthing arrangement and insulator as per direction of eic., laying of one no. cable 10 sqmm 3 core ( departmental supply) in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of thecable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed., carrying and fixing three phase submersible pump 7.5 hp mug starter as per direction of eic ., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc.

CTN :40098463

14 May, 2025 NA

Darjeeling - West Bengal

Tender For supply of circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs complete set with all accessories , elect earthing set with complete set , hot water boiler of capacity 500ltrs , puf insulated 55mm thick water tank 1000 ltrs with gi flange , water staging platform made of ms angle of size 40x40x6 mm , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to15 mm dia , ppr female threaded socket 20 to15 mm dia , ppr female threaded elbow 20 to15 mm dia , ppr male threaded elbow 20 to15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 25 mm , ppr balve valve light weight brass 20 mm , ppr balve valve light weight brass 15 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillar cock brass chomium plated , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp to r tank connector , pre fabricated septic tank of 2000 ltrs capacity and septic tank shall be anchored with hold , prefabricated soakage pit of 1000 ltr capacity and soakge pit shall be anchored with hold fast , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure oblique sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch dia with grating 4 inch outlet , iwc stainless steel pvc p trap inlet 4 inch dia with 4 inch outlet , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe angle and pvc pipe , stop cock cp 25 mm , wash hand basin 500x400mm steel with waste pipe and coupling alongwith 02 nos ci bracket with screw pvc connection 450mm long , vitreous china bowl urinal flat back white of size 465x355x265 mm , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm ply backing and aluminium l section frame , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge high carbon steel product code svl 022 blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work og oblique black , full body safety harness light weight designes with breathable open core padding technology , gum boots for snow fall area , screw driver , portable drill machine with 06 nos 8mm dia bits , industrial safety helmet , prefabricated structure of size 7200 x 5000 x 2400 mm , pillor cock brass chomium plated , prefabricated shelter structure for ffl of size 2 point 4m x 1 point 28m as per drawing , non skid ceramic tiles of size 300 x 300 x 7mm , quick setting compound , led bulb 10 watt cool day light suitable for domestic lamp bid details/ 2 / 82 holder , angle holder made of backelite lamp holder should be insulated type , mcb 6 amp single pole 240 watt , surface plastic box suitable for modular switches and socket of 8 module , solid plate with base frame suitbale for surface plastic box of 8 module , xlpe cable pvc insulated aluminium conductor served with inner sheathing of pvc

CTN :40098465

14 May, 2025 NA

Darjeeling - West Bengal

Tender For supply of threaded screw 1 inch , conduit pipe 20mm dia 10 feet long , pvc tee 20mm , pvc elbow 20mm , pvc circular jn box 2 to 4 way , pvc shaddle clip with screw , ceiling rose pvc , pvc square block , tape insulation 10 mtr , mcb db spn 8 way double door 240 volts with bus bar , mcb 6 amps sp , mcb 20 amps sp , mcb spn 40 amps 240 volts , exhaust fan 300mm sweep with louver shutter , pendent holder made of bakelite , lcs complete set with all accessories , elect earthing compelte set , hot water boiler of capacity 500ltrs , puf insulated 55mm thick water tank 1000 ltrs with gi flange for connection with nipple and gasket , water staging platform made of ms angle of size 40x40x6 mm , ppr pipe 20mm dia , ppr pipe 25mm , ppr tee 20mm , ppr tee 25mm , ppr elbow 90 degree 20 mm , ppr elbow 25mm , ppr elbow 90 degree 25mm , ppr male threaded socket 20 to15 mm dia , ppr female threaded socket 20 to15 mm dia , ppr female threaded elbow 20 to15 mm dia , ppr male threaded elbow 20 to15 mm dia , ppr socket 20mm dia , ppr socket 25mm dia , ppr union 20mm , ppr union 25mm , ppr reducer 25x20mm , ppr reducer tee 25x20mm , bib tap brass chromium plated sutable for 15mm ppr water supply line , ppr balve valve light weight brass 25 mm , ppr balve valve light weight brass 20 mm , ppr balve valve light weight brass 15 mm , pvc clip for ppr pipe 25mm dia , pvc clip for ppr pipe 20mm dia , ppr reducer elbow 25x20mm , ppr male threaded tee 25x20mm , pillar cock brass chomium plated , taeflon tape , pvc float value heavy duty 25mm dia suitable for ppr pipe , 25mm pp to r tank connector , pre fabricated septic tank of 2000 ltrs capacity , prefabricated soakage pit of 1000 ltr capacity , pvc pipe 4 inch dia 6 mtr long heavy duty type a having 5 kg pressure oblique sqcm , pvc socket 4 inch dia , pvc elbow 4 inch , pvc tee 4 inch , pvc floor trap 4 inch dia with grating 4 inch outlet , iwc stainless steel pvc p trap inlet 4 inch dia with 4inch outlet complete , pvc flusing cistern 10 ltrs capacity with pvc connection and waste pipe angle and pvc pipe , stop cock cp 25 mm , wash hand basin 500x400mm steel with waste pipe and coupling , vitreous china bowl urinal flat back white of size 465x355x265 mm , looking mirror size 450 x 600 x 5 point 5 mm thick with 4 mm , stainless steel peg stay contains 4 hooks fancy type , soap dishes stainless steel size 10cmx12cm , towel rail cp 600mm long , plaster trowel with woodwen handle , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16 inch dia minimum weight 1 kg , double end spanner for 16 mm dia nuts and bolts , showel square nose 14 gauge blade size 310 x 245mm shaft size 710mm fitted , fish line , hammer ball pine 1kg , electric tile cutting machine with 5 nos inter changeable blades , measuring tape 3 mtr , gi sheet cutter scissors , transperant pipe 5 mm dia bore for water leveling , multipurpose non slip rubber reusable gloves colour og oblique black , full body safety harness light weight designes with breathable open core padding technology , gum boots for snow fall area , screw driver 12 inch with insulated plastic handle , portable drill machine with 06 nos 8mm dia bits , industrial safety helmet , cross member rhs 40 x 80 x 3 point 2mm lower with isa 50x50x4mm of 1505mm long , cross member rhs 40 x 80 x 3 point 2mm lower center with both side isa 50x50x4mm of 1505mm long , cross member rhs 40 x 80 x 3 point 2 mm upper x1505 mm , cross member rhs 40 x 80 x 3 point 2mm x 2420mm lower gable with isa 50x50x4mm , cross member rhs 40 x 80 x 3 point 2 mm x 2420mm upper gable , bid details/ 2 / 115 column shs 90x90x4 mm inbiult with both side bush and fdn lock , ceiling support shs 50 x 50 x 2 point 9 for upper x 2420mm , ceiling support shs 50 x 50 x 2 point 9 for upper x 2510mm , ceiling support 40x80x3 point 2 mm for upper x 1890 mm , floor support tie member rhs 33 x 66 x 2 point 6mm for lower x 2510 mm , floor support tie member rhs 33 x 66 x 2 point 6mm for lower x2420 mm , cross tie member

CTN :40098175

14 May, 2025 NA

Kamrup - Assam

Tender For supply of 43 i 43 akl b6518576 pipe wrench 350 mm , g2 9520 000009 steel angles 45x45x5mm , g2 9520 000001 steel angles 20x20x3 mm , g2 9520 000002 steel angles 25x25x3 mm , g2 9520 000003 steel angles 25x25x5 mm , g2 9515 000012 steel sheet carbon cold rolled 1800 x 90 , g2 9520 000010 steel angles 45x45x6mm , g2 9510 000042 steel bar carbon hot rolled flat width x , g2 9510 000114 steel bar carbon hot rolled flat 20 x 6 m , g2 9520 000008 steel angles 40x40x6mm , g2 9520 000007 steel angles 40x40x5 mm , g2 9510 000317 steel bar alloy hot rolled flat 50 x 5mm , g2 9510 000020 steel bar carbon hot rolled round 10 mm , g2 9535 000169 copper sheet 1250x630x2.80mm , g2 9510 000329 steel bar alloy hot rolled flat 75 x 10 m , g2 9510 000318 steel bar alloy hot rolled flat 50 x 6mm , g2 9510 000303 steel bar alloy hot rolled flat 25 x 3mm , g2 9520 000004 steel angles 30x30x3mm , g2 9515 000032 steel sheet carbon galvanised plain 1800x , g2 9510 000022 steel bar carbon hot rolled round 12mm , g2 9510 000058 steel bar carbon hot rolled flat 40 x 6 m , g2 9510 000030 steel bar carbon hot rolled round 40 mm , g2 9510 000319 steel bar alloy hot rolled flat 50 x 8 mm , g2 9510 000307 steel bar alloy hot rolled flat 30 x 6mm , g2 9510 000026 steel bar carbon hot rolled round 25 mm , g2 9510 000084 steel bar carbon hot rolled flat 75 x 12 , g2 9510 000044 steel bar carbon hot rolled flat width x bid number/ & ( * ) : gem/2025/b/6160952 dated/ + : 23-04-2025 bid document/ 3 3 1 / 28

CTN :40085824

29 Apr, 2025 9.01 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/02 - deepnagar to rail way station rest part,length of road - 500 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, km stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 200 m stone- reinforced cement concrete m15 grade kilometre local stone of standard design asper irc:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703., 600 mm equilateral & triangle - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, 600 mm circular - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads@ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free from streaks and holes. (pcc), providing and fixing of typical mmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on

corporations/Associations/Others

CTN :39073094

25 Apr, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras tender for supply of various types of aluminium sheets as per specification - aluminium sheet 10g(3.2mm) conforming to is737 2008 grade 19000 h2 , size 2500x1250mm(standard size) , surface type best without any defect. make nalco/balco/hindalco/jindal/tata. qty 20sheets. , aluminium sheet 12g(2.5mm) conforming to is737 2008 grade 19000 h2 , size 2500x1250mm(standard size) , surface type best without any defect. make nalco/balco/hindalco/jindal/tata. qty 10sheets. , aluminium sheet 14g(2.0mm) conforming to is737 2008 grade 19000 h2 , size 2500x1250mm(standard size) , surface type best without any defect. make nalco/balco/hindalco/jindal/tata. qty 10sheets. , aluminium sheet 16g(1.6mm) conforming to is737 2008 grade 19000 h2 , size 2500x1250mm(standard size) , surface type best without any defect. make nalco/balco/hindalco/jindal/tata. qty 30sheets. , crcs (cold reduced low carbon steel) sheet 10g(3.2mm) conforming to is513 2008 grade cr2 , size 2500x1250mm(standard size) , surface type best without any defect. make tata/sail/jindal/bhusan/vizag. qty 20sheets. , stainless austenitic steel flat bar conforming to astm a276 , grade 304 , size 40(w)x4(t)mm , surface type best without any defect. make tata/sail/jindal/bhusan/vizag. length 50m , charges for chemical and mechanical properties testing from nabl approved lab.(for above materials)

State Government

CTN :40093299

13 May, 2025 2.00 Crore

Multi City - Gujarat

Tender For supplying and stacking various types of building, roads & other construction materials, at various places of taluka tilakwada under taluka panchayat, tilakwada under mgnrega (annual unit rate) - cement (isi 53 grade opc), white cement, coarse sand 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., fine sand 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., brickaggregate 40mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., brickbats20mm 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., common burnt clay bricks conventional size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m. flyashbrick 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., hand broken stone aggregate 25mm size to 90mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., hand broken stone aggregate 40 mm size to 63mm size. 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., crushed stone aggregate for hard quality10 to 20mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., crushed stone aggregate for hard quality 40mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., crushed stone aggregate for hard quality 40mm to 63mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., crushed stoneaggregate for hard quality 6 to 10mm size 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., quarryspall 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., murrum/bindingmaterial rubble 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., rubble(heavy)at not less than40kg. 5.0k.m. 05k.m. -10 k.m. 10k.m. -15 k.m. 15k.m. -25 k.m. 25k.m. -50 k.m. 50k.m. -100k.m., t.m.t.barsfe- 415, tmt bar - fe 500 d, mild steel bars, white bela stone (size to be measured) 23 cm, stone dust, vitryfied granite tiles 8 mm to 10m thick 24 x 24 size dark shade, ceramic tiles, hard murrum, polished kota stone slab green. 25 mm thick, oil bound distemper (two coats) including primer, water proofing cement paint, white lime ( white washing), dry distemper, birla or asian acrylic lapy (putty), weather proof acrylic exterior emulsion paint, binding wire of 18 gauge thick annealed iron, paver block m200 grade 60mm thick, paver block m250 grade 60mm thick, white vitriousching w.c. sqatting pan (india type), urinal ladies squatting pan, urinal squatting type, flat back wash basin colour glazed 550 x 400 size, p.v.c. pipes 6 kgf / sq.cm. 110 mm dia., p.v.c. pipes 6 kgf / sq.cm. 50mm dia., p.v.c. pipes 6 kgf / sq.cm. 75mm dia., u pvc sch40 for cold water 25 mm dia (1)", u pvc sch40 for cold water 32 mm dia (1 1/4)", u pvc sch40 for cold water 40 mm dia (1 1/2)", u pvc sch40 for cold water 50 mm dia (2)", stone slab 100mm thickness, gun metal wheel valve (i) 15 mm diameter., gun metal wheel valve (i) 20 mm diameter., gun metal wheel valve (i) 35mm diameter., gully trap 100mm x 100 mm size., c.i. nahni trap, c.p. brass 1/2 turn flush cock 20 mm dia, c.p. brass 1/2 turn flush cock 25 mm dia, brass screw down bib type. 15mm dia., brass screw down bib type. 20mm dia, pvc water tank, ceiling fan with double ball bearing isi mark with condenser a.c. 23ov.50 c/s.1200 mm., providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or fan box., approved make cfl retrofit 5 / 7 / 9 /11 watt, erected if required, 18-20 watts, surge - 2kv,ip-20, conventional 4 feet, moduler switch board (including plugs and regulators) 6 switch (isi mark), moduler switch board (including plugs and regulators) 4 switch (isi mark), holders for lamp, tubelight& fan) isi mark (standard

Central Government/Public Sector

CTN :40083046

12 May, 2025 NA

Multi City - Multi State

Tender For raw material - steel rod 3 mm dia 35nc6 'ht', steel rod 6 mm dia35nc6 'ht' air 91, steel rod 8 mm dia35nc6 'ht' air 91, steel rod 10 mm dia35nc6 'ht' air 9, steel rod 12 mm dia35nc6 'ht', steel rod 14 mm dia35nc6 'ht' air 9, "steel rod 16 mm dia 35nc6 'ht'as per air9160c edition 4, quenched and tempered condition, ground and uncoated; dia 16mm(+0/-0.07mm)", steel rod 60 mm dia35nc6 'a' air 9, steel rod 65 mm dia 35nc6 r90, steel rod 70 mm dia35nc6 'a' air 9, steel rod 90 mm dia35nc6 'a' air 9, steel rod 95 mm dia35nc6 'a' air 9, steel rod 100 mm dia 35nc6 r85, steel rod 125 mm dia 35nc6 r85, steel rod 150/160 mm dia 35nc6 "a", al alloy tube 14x1mm 2024 t3, rod al alloy 25 mm diaag5 h111 or 5, rod al alloy 8 mm diaag3 / h111 air 9049, flat al alloy 110x110mm, l-168, flat al alloy 36 mm x 36 mm, l-168 (alt spec - au4sg), flat al alloy 16 mm x 50 mm, 0.5 mm thk aluminium sheet, a5 'annealed', 0.8 mm thk al alloy sheet, 1.0 mm thk al alloy sheet ag5h111 air 9048, 1 mm thk aluminium sheet, a5 h111, al alloy sheet 1.2 mm thkau4g1 (t3) air 9048, al alloy sheet 1.2 mm thk5086 h111, 1.5 mm thk aluminium sheet a5 'annealed', al alloy sheet 1.6 mm thkau4g1 (t3), al alloy sheet 2 mm thkau4g1 (t3), 4.0 mm thk al alloy sheet, al alloy sheet 1.5 mm thka5 or l17 laminated sheet (0.05 mm lamelle) la=1.5air 9048, brass laminated sheet, 1.8 mm thk, st steel sheet 0.4 mm thkz10 cn18-8, st steel sheet 0.5 mm thkz10 cnt 18, steel sheet 0.5 mm thk 25cd4s 'n', steel sheet 0.6 mm thk15cdv6 'ht'air 9160 c, steel sheet 0.8 mm thkxc38 air 9160 c, steel sheet 3 mm thkxc38 air 9160 c, st steel sheet, 3.0 mm thk, x6crniti18-10 r 490 / 690 mpa type 321 aspect 2b asna 3106, titanium alloy sheet, 0.635 mm thk, ta6v (ti6al4v) asna 3200, flat al alloy 8 mm x 20 mm2024 t351 or au4g1 t3air 9049, steel flat 40 x 2035nc6 'ht' air 9160 c, steel flat 40/42 x 2535nc6 'ht' air 9160 c, steel flat 70 x 45 35nc6 ts=90kg/mm sqair 9160 c, 9 mm a/f, hexagonal bar, 35nc6 treated air 9160c, tolerance h11, 12 mm a/f, hexagonal bar, 35nc6 treated air 9160c, tolerance h11, 14 mm a/f, hexagonal bar, 35nc6 treated air 9160c, tolerance h11, hexagonal steel bar17 mm a/f35nc6ht air 9160 c, hexagonal steel bar 19 mm a/f 35nc6ht air 9160 c, steel sheet 0.8 mm thk 1.4310 k130, steel sheet 1 mm thk xc38 'n' air 9160, normalised condition, ts 590 mpa, rilson sheet, 5 mm thk, pa6, rilson sheet, 10 mm thk, pa6

State Government

CTN :40059761

07 May, 2025 1.30 Crore

Mahisagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kadana under taluka panchayat, kadana under mgnrega (annual unit rate)-, 53 grade isi opc cement, , crushed stone aggregate for hard quality 10 mm to 20 mm size, , crushed stone aggregate for hard quality 40 mm to 63 mm size, , screened gravel 10 mm size, , screened gravel 12 mm size, , unscreened gravel, , coarse sand, , fine sand, , rubble, , murrum/ binding material, , t.m.t. bars fe-415, , stone dust, , white cement, , distemper primer, , bricks aggregate 40 mm size, , hysd bar, , hand broken stone aggregate 40 mm size to 63 mm size, , binding wires, , bitumen washer, , g.i. j or l hooks., , g. i. plain washer, , enamel paint, , enamel primer, , door shutters decorative type 35 mm thick both sides teak finished., , marble slab polished granite stone 20 to 25mm thick blacs, , flat back wash basin white vitrious china 450mm x 300 mm size, , urinal stall type half size, , r.c.c. heavy duty non-pressure pipe l.s.class np2-900 mm dia., , r.c.c. heavy duty non-pressure pipe 1.s.class np2-600 mm dia., , pvc water tank, , upvc sch 40 for cold water 15 mm dia. (1/2"), , upvc sch 40 for cold water 25 mm dia. (1"), , upvc sch 40 for cold water 40mm dia (1.1/2"), , p.v.c. pipes 10 kgf/sq.cm 110 mm dia., , p.v.c. pipes 10kgf/sq.cm 50 mm dia, , 5 waste pipe for wash basin c.p. 32mm dia., , 7 structual steel m.s. channel, joints, tee, gusset plate ete., , vitrified granite tiles 8 mm to 10 mm thick 24" x 24" size dark shade, , 9 white vitrious china w.c. sqatting pan (indian type), , -0 white vitrious china 'p' or 's' trap, , 11, , white vitrious ching wash down w.c. (european), , 42 m.s angel, , 43 vitrified granite tiles 8 mm to 10 mm thick 24" x24" size light shade, , 44, , m.s. sheet 1 mm thick, , 45, , pillar tap 15 mm dia., , 46, , polished kota stone slab green 25mm thick, , 47, , paver block m200 grade 60 mm thick, , 48, , common burnt clay bricks conventional size, , 49, , g. i. sheet 0.8 mm thick corrugated class-3, , 50, , galvanised mild steel tube medium grade 40 mm dia., , 51, , hire charges for road roller, , 52, , white lime (white washing), , 53, , r.c.c. heavy duty non-pressure pipe i.s.class np3-600 mm dia., , 54, , gun metal screw down bib tape 15 mm dia, , 55, , crushed stone aggregate 40mm size, , 56, , white glazed tiles 15 cm x 15 cm x 6 mm, , 57 ci or ms brackets, , 58, , brass screw down bib tape 15 mm dia, , 59, , white vitreous china sink 600mm x 450 mm x 150 mm, , 60, , brass screw down stop cock 25 mm dia, , 61, , ci cover with frame 455 mm x 610 mm, , 62, , water profing cement paint, , 63, , cement concret mixer, , 64, , drilling of 215 mm dia. bore in over burden strata including lowering and fixing of 175 mm, , , nominal dia upvc pipe up to required depth and further drilling of 165 mm dia bore hole in rocky strata by d111 ng, , manufacture, supply and delivery of isi marked upvc casing pipe (18-12818 )175 mm nominal dia "cs" type, , providing and supplying single phase borwell submersible pump motor set with control panel of 20 lpm, 110 mt head and 1.5 hp., , pvc insulated flat submersible cable as per detailed technical specifications of r/c of gwssb conforming to is 694, iec 60227 60228. 1 r x 30 x 4.0 mm, , manufacture, supply and delivery of following isi marked (is: 4984/1985 with latest amendment) having material grade pe-80 in requirement at site with ss-316 nipple at both end having 11 t?? threading dn-40, pn-10., , lowering of single phase submersible pump set complete with required length of hdpe pipe & cable in bore well and fitting up to 90mt depth, , electrification, , nails 50 mm long, , centering and shuttering, , water tanker 6 kl capicity,

Channel Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

State Government