Latest channel laying Tenders | Government channel laying Tenders

corporations/Associations/Others

CTN :45411723

10 Jun, 2026 14.71 Lacs

Chandigarh - Chandigarh

Tender For dismantling, providing and re-fixing of kerb and laying cement concrete in channel on v 6 road sector 35 c and d, chandigarh.

corporations/Associations/Others

CTN :45411732

10 Jun, 2026 39.85 Lacs

Chandigarh - Chandigarh

Tender For dismantling, providing and re-fixing of kerb and laying cement concrete in channel on v-5 road sector 34 aandb and on v-6 roads sector 34 candd chandigarh.

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

Central Government/Public Sector

CTN :45374545

08 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous ms angle, channels from demolished platform/shed/fob with/without attachment of rails, rails used in structures, gipipes, castiron pipes, fabricated structural (ismb, ismc, isa i beams), earthin g plates, engineering items such as bridge side guards, cut mast with / without bricks, cut angles and chanels, angles with rail fittings and attachments used in engineering structures, frame of steel, ms channels, i beams, tees, framework of steel, cut rails, structural steel, ms flat, ismb, plate, round rods, doors, ismc, beam, angles, square tube with base, rolled steel joist, angles with rail attachments, tank cutting box/coach mfg fixture, pipes, gi pipes, ci pipes, cast iron items, water channel sheets, support structures and fabricated rails with or without brick/concrete, minor nonferrous wire attachments, rails used for structural support, fob materials, cut parts of girders,fob electrical channels, ladders, l angles welded with plates, bolts & nuts, mast for compressor, traversor dsl support mast in dismantled condition, fob materials consisting of angles, channels, supporting rod of beams and ms plates and with/without pipes/ fittings of all sorts and sizes in as is where is condition. pl no. 98030309. custodian: cdms-rsf-gsd-per. note: (1) cutting permission is granted to heavy nature items to lorry loadable sizes only. (2) loading by crane is also permitted. (3) if any non-ferrous materials found should be handed over to custodian. location: b row bin 16

State Government

CTN :45360126

04 Jun, 2026 NA

Warud - Maharashtra

Tender For material supply for construction of gp bhawan - material supply, 80mm metal, 40mm metal, 20mm metal, murum, bricks, emulsion paint, concrete mixer, cement 50kg bag with isi mark, fine sand, steel tmt 500 (8 mm 10 mm 12mm 16mm), vitrified tiles, pvc pipe110mm, ceramic tiles, syntex tank, 15mm pipe, 20mmpipe, wheel stop, grill, sliding window, ventilaters, channel gate, cement frame, acrylic plastic sheet panel (door), door frame (sagwan), primer, water proofing cement paint, paver block, distemper, engrave marble naming plate size 90*60cm

Central Government/Public Sector

CTN :45371767

18 Jun, 2026 NA

Ferozepur - Punjab

Tender For certain b/r repair to plumbing sanitary items pvc doors and other allied works in various md accn in area of age b/r ii of ge (west) ferozepur - demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed., dismantling floor, hearth or wall/stone tiling including cement mortar bedding (but not backing), removing broken tiles and rubbish off the premises from site complete all as specified and directed., demolition of brick work built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed., taking up or down existing 15mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., taking up or down existing 20mm bore steel water tubing and connections,including clreaning for refixing or removal, fixed/laid in any situation, complete all as specified and directed., m&l for taking down existing stop valve / bib cock 15 mm bore by replacing head/washer/spindle/cap etc and refixing the same complete all as specified and directed., m&l for taking down existing low level flushing cistern and refixing after replacing the syphon, ball valve with washer and flush handle complete all as directed., demoletion and breaking up drain pipes 110 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, demoletion and breaking up drain pipes 75 mm dia (salt glazed ware,ac, pvc or reinforced concrete) set in cement mortar complete all as specified and directed, taking down cement plaster of any description on brick walls or concrete or stone and ceilings including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, and removing from site complete all as specified and directed., m&l for brick work built in cement mortar (1:6) with sub class b old size bricks, straight or curved on plan exceeding 6m mean radius complete all as specified and directed., s&f 50mmx47mm size solid pvc door frame made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified shown on drawing and specified and directed., s&f factory made 30mm thick (style) solid panel pvc door shutter consisting of frame made out of ms tubes for top & bottom rails, ms frame covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour pvc sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable pvc sheet beading and jointed together with solvent cement, in the frame at site as per clause 8 b.2.1 of mes schedule part-ii (2004) complete all as specified shown on drawing and specified and directed., s&f ptmt tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed., s&f ptmt butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed., s&f ptmt handle 150mm long fixed with steel screws complete all as specified and directed., m&l for 25mm thick plain cement concrete (1:2:4) type b-0 using 12.5 mm graded crushed stone aggregate as in surface finished rough to receive floor topping, surface finished even and fair complete all as specified and directed., m&l for 10 mm thick (square/ rectangular) light shade vitrified tiles coloured, premium quality, joint-free, area of eac

corporations/Associations/Others

CTN :45357569

05 Jun, 2026 24.93 Lacs

Chandigarh - Chandigarh

Tender For dismantling, providing and re-fixing of kerb and laying cement concrete in channel on v 4 road and on v 6 road sector 43 a and b, chandigarh.

corporations/Associations/Others

CTN :45285991

29 May, 2026 39.85 Lacs

Chandigarh - Chandigarh

Tender For dismantling, providing and re-fixing of kerb and laying cement concrete in channel on v-5 road sector 34 aandb and on v-6 roads sector 34 candd chandigarh.

corporations/Associations/Others

CTN :45285995

29 May, 2026 14.71 Lacs

Chandigarh - Chandigarh

Tender For dismantling, providing and re-fixing of kerb and laying cement concrete in channel on v 6 road sector 35 c and d, chandigarh.

CTN :45258309

29 May, 2026 19.18 Lacs

Ernakulam - Kerala

Tender For supply of materials for mgnregs works in various wards of varapuzha grama panchayath - supply of materials, stone for masonry work, through and bond stone size 24 x 24 x 39cm, sundries, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, double clip (bridge clip), single clip, m.s. tube 40 mm dia, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, water, well graded material for sub base grading i, 53 mm to 9.5 mm below @ 50 percent, well graded material for sub base grading i, 9.5 mm to 2.36 mm below @ 20 percent, well graded material for sub base grading i, 2.36 mm below @ 30 percent, interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size): 06 mm nominal size, stone aggregate(single size): 40 mm nominal size, second class kail wood in planks, second class kail wood in scantling, twisted steel/deformed bars, solid blocks of size 30x20x15cm, fine sand (zone iv), mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, synthetic enamel paint in black or chocolate shade, gi trafford profile sheet 0.35mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc bend 63 mm dia

Channel Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors